I used a 4 pint milk bottle at the top of the res and used masking tape to seal up.
On the skinny hose from the pump put that into a large water bottle and blank off where it would go on the res, use a big bolt and a piece of hose, worked for me.
Fill the milk bottle up, you should be able to see it though the bonnet gap if your in the car.
Start the engine but be ready to turn it off as it will stuck though like a mo fo. Once you see all the fluid from the milk bottle gone turn the engine off.
Use the bottle cap from the water bottle to seal it so you do not spill connect the skinny pipe back to the res, top up if needed.
Bingo all done, just go for a drive and steer lock to lock.
Just dexron iii from euro car parts, its cheap and thats all you need