a98pmalcolm

well JPS said its worth it and as i have one anyway i thought i mite aswell. as im running more BHP its always a bit better to get that bit extra fuel pressure. I see alot of people use them on the supras.

looks great mate! wheels go well. Looks like your from the states! so id say there being no number pate on the front is what makes it look odd. as you dont have to have them on the front in the states lol. lucky gits hehe

hi all. Ok i have one spare knocking around that came off my corrado G60 and i ordered the correct parts from FSE today to it it onto my supra. i beleive that the orignal fuel regulator is above the 1st injector. but any advice on fitting and were all the hoses go on the regulator? I have numbered each hose do were i think the lines go. If im wrong can you tell me what is correct? What pressure should i run it at with a BPU. I ran 4 Bar on the corrado. I think this is the origanal relator. http://img11.imageshack.us/img11/7962/06102009010o.jpg And this is the sytec valve with the way i think the lines go in: http://img62.imageshack.us/img62/961/sytec.jpg Thanks Paul

there 3" which is 76mm 45degree the ones have here are e-tec ones also says "silicone hoses.com" I got them for £15 each as i get on well with the guy at my local tuning shop. But i think there around £19 each normaly Thanks Paul

nice

she has a "mum" look to her lol...not bad though lol

thanks guys!

ah mate not cool! but it could be worse! u got ya health! dont let it get to ya bro....in a few months this will all be forgotten about....

hay all, iv finished tidying up my engine bay with blue hoses, strut brace etc ect... I didnt want it all chome (even though it would be nice) but went more for a tidy suttle look let me know what you think.. When i picked it up from Jugan about 5 months ago. http://img203.imageshack.us/img203/1914/dsc0351701.jpg Then i added a few HKS graphics, cleaned it up a little more. http://img242.imageshack.us/img242/6574/14072009279.jpg Then added a new induction kit http://img7.imageshack.us/img7/6748/11082009298k.jpg The hoses that came with the induction kit was like monkey rubber so i replaced them with much better longer and thicker hoses. Also makes the air filter even ferther away from the engine. Did all my vacume hoses. Replaced the rad hoses. Fitted a strut brace. Had BC shocks fitted and so there gold at the top (not puple like the HKS ones) And this is the out come: http://img188.imageshack.us/img188/2691/06102009006k.jpg http://img203.imageshack.us/img203/7941/06102009007g.jpg http://img203.imageshack.us/img203/5927/06102009008.jpg Im pretty happy with it i have a FMIC cover on order so that will cover that gap at the front. i hope you all like. Thanks for looking Paul

oh....and..dear!

makes u wanna kill yourself! lol

thats tallent!

ah mate not cool!

mainly town driving...stop....start...stop....start etc...

The I5 prosessors are great! cant really beat them...only problem is you have to have a very expensive motherboard to suport it! So the motherboard and the processor you looking at big bucks!

i get 186 (300 km) miles if im lucky ..... crap... is that not rite then? steady driving most of the time get the burst now and again to put the foot down

smiley faces or crocets!

lol only the Japs! what is it with them so......strange lol. make good cars and electrics though lol

cheapest is overclockers uk but i get all mine from powerC coz there closest. (in bedford) but my PC cost over £1500 that i built my self over time.....with a budget mate get a good tower (i used the antec gamers about £100) and a good mother board i used a GIGABITE one for about £100 and then use all your componants u have now and build it better and better everymonth! So over the past near on year i ended up with 2000GB of hardrives Intel quod core with 16MB cache crossfired ATI 2GB graphics 8GB of ram etc etc etc so in time it will all buid up bro

nice!

if your using the optical, go into you PS3 setting in the main menu. and make sure u have the optical out put set as the audio out, also in the TV settings check the sound imput settings (if there is one)

deffo the PS3 mate!

i thought this sold a while back! i really like this, shame it wasnt for sale 5 months back...

not to keen on that front bumper! prefer the more std look like Jurgans!

hi mate! this is the place to be for the questions you have!....popular thing to do at 1st is a nice tidy exhaust, and a cone filter! That mite just go over £300 but id spend my money getting it all tidyed up and getting any faults sorted!