a98pmalcolm

well i bought a genuine boch S4 blue top batuary today, with a 550 cold start crank over! so alot more power than a standard! only £53 and its ment to go dirrectly onto my supra, They had to order it but they got it on 3 hours! so im fitting that tommorow and i will give u all an update! If its not the bat it think its a good idea uprgading it due to the sound system, boost conrtoller, water injection, uprated fuel pump etc etc just all these lil things adding up to drink more power!

happens to the best of us mate

well done mate! on the next one if you have curb marks gently rub at them with corse sand paper then wet and dry them to smoth.... Looking good bud

jesus! i that must churn your stomach!

wow!! awsome mate! it felt dam fast when u took me out in it! i think u were saying it was be around 600BHP then, this should feel a beast!!!

not my cup of tea but thats y all out cars look different as we all have different tastes!

i always tell people its a coupe.... as far as i know if the boot tales off like a salloon, boot opens with the rear window and its for 3 doors is a coupe if the glass opens with the boot and the back is flat its a hatchback... well thats always been my therioy lol

Yer i was thinking that as i fitted a sub a few tuesday, and low and behold a few days later this is happening! Mite to the bat 1st! most probly be good to change the bat after all these years!

yer sounds like bat to me aswell, check all the fuses aswell

yer looks like "the hangover" type film. looks good

lol looks awsome mate

thanks all. i e-mailed paul whifin about this as im at his places tuesday, hes goin to take a look but hes thinking its the starter and will see if he has any 2nd hand ones lyin about..

haha love to but... 7 hours building it not so keen lol well i live in a nice area and when its parked up for work its in a secure car park with only 10 cars in there all being watched 24 hours a day... so i should be ok... thanks for the head up though

that tubo it B I G!!! lol Type T sticker is a bit stupid though lol

i had to replace my HKS coilovers due to them knocking!!

Ok tonight i went to start my car, turned to acc, i wait a second for 2 for the fuel pump to start up.... i turned the key to start the engine and i just got 1 tick sound from the starter, as if the battary was to low to turn over the starter! So i plugged the car charger on, went to make my vote came back and it did it again, tryed again and it started. Went for a 15 min drive, turned off and then turned on and it started fine. So i drove to my mates house and when i came out a few hours later turned the key. Nothing, turned again, it started?? Any advice would be great! Thanks Paul

no it was just the way it worked out, problem is i still wanted a boot and didnt wanna just give up the boot! So to mate sure that thesub has 1 cubic area inside the box... with a tidy look this is the only way it could come out!! ME and my dad had a good time building it though! was a giggle... and an experience of doin it!

You have to have a watch!! made me chuckle! lol )/v/wPCb9svdhfw&hl(

thanks mate

douche!

pm jurgan from jm imports im sure he has one lying about!

haha awsome

yer this is one that a company in burnly had performace import or sumin... yer the out side is just wrong! HOWEVER i love the dash!!

Hay all. As some of you know iv been measuring up and doing some calculations on making my custom sub box for my supra. A lil hard work when into it with alot of help from my dad (thanks dad) and a total of 15 hours for a nice result! I went for a Rockford Fosgate PS3D412 shallow sub with an MRP-M352 alpine amp using autoleads wiring kit.... got a lil discount as i get on well with the guys at Autronix! Thanks lads Ok here is the kit: http://img260.imageshack.us/img260/1078/20100504001.jpg The base and 2 sides place in to make sure i have made the correct messurments! http://img693.imageshack.us/img693/9894/20100504004u.jpg Dad plaining the sides to make the correct angles for a tidy look. http://img405.imageshack.us/img405/7083/20100504005.jpg We pre drilled wholes in the 3/4" MDF to make sure that the wood wont split when putting the self tappers in http://img689.imageshack.us/img689/2965/20100504006.jpg Then used the counter sink tool for the screw head to sit nicely http://img7.imageshack.us/img7/263/20100504007.jpg Sides being glued and screwed into place http://img294.imageshack.us/img294/3627/20100504008.jpg As you can see its all starting to take shape! http://img189.imageshack.us/img189/9427/20100504009.jpg With the top on we know can now shave any odd angles and make it a nice finish befor adding sealant for the enclosure. http://img243.imageshack.us/img243/8243/20100504010.jpg The hole cut out for the sub http://img441.imageshack.us/img441/7076/20100504011.jpg The top is removed so now there is no more sawing to be done.... time for sealant for a tight enclosure! http://img59.imageshack.us/img59/6624/20100504012.jpg Time for carpeting in my room. Its ideal as i can stretch the carpet out to cling on to my floor carpet so no wrinkles nor creases will be on the box! Hard multipurpose prit-stick was ideal! http://img341.imageshack.us/img341/2312/20100504013.jpg Banzai mags and an upside down table to help the glue dry firmly lol http://img688.imageshack.us/img688/5963/20100504014.jpg Ok all cupeted and the sub in place ready for the car! And need to screw on the "Punch" ring! I didnt want a huge system as it just adds more weight but this is seriously loud! Any more would blow my head i think lol! http://img72.imageshack.us/img72/1470/20100504015.jpg And finally the finished product! Ok a nice hover and a lil more of a tidy up with carpet is in order! But thats about it http://img710.imageshack.us/img710/2833/20100505001.jpg http://img23.imageshack.us/img23/9316/20100505003.jpg http://img21.imageshack.us/img21/7990/20100505004.jpg http://img215.imageshack.us/img215/5190/20100505005.jpg Well i hope u all like.. Feel free to leave comments Thanks Paul

sounds awsome! u have to get some vids on the road!!!