a98pmalcolm

Hey all, was nice meeting some new faces today, Weather was great too. All cars looked fab Apologies on the noise:innocent:

Me and Grant are leaving Bedford at 7, so should be there around 8.15 I guess, depending on que

Sold now from Ebay

Ok thanks Scooter

On the NA Auto pre face lift Supra bushes at the rear of the diff that goes into the year subframe (one side has 2 bolts and the other has 1 bolt) Are both bushes meant to be there? Or do they only us 1 bush with the 2 bolts? Thanks Paul

Very fair price

Thanks for the input mate but I like the look of matching tyre sizes to the front and back. new set up will make the car sit exactly how it it now just more Tyre less wheel

Its what I run that already But as I'm going down to 18" from 19" I will have a bigger sidewall so it will have come what more give compared the the rubber bands that are on there now.

Thanks for the replys fellas . I decided on ET30 8.5 Front with a 235/40/18 Tyre and ET30 9.5 Rear with a 265/35/18 Tyre

Hey all, I'm looking at getting myself a set of Grid GTR's this year. But its a little confusing with the offset on the front. So I think its safe to say the rears need to be 18" x 9.5J Offset 30 But I see some people say for the front 18" x 8.5J Offset 35, but others say offset of 30. I do have big brembos. Any thoughts would be helpful Thanks Paul

Ah bloody hell nice

Looks like we are in section T5, is there a guide yet of where abouts that is? - - - Updated - - - oh just realized this

Will PM you mate

Thanks for the reply buddy, PM'ed

Ah ok thanks Evin, do you know if there is a online manual for this? Thanks I have pics from the sides and top below. Its the S2000 aerial side thats the issue

Hey all, ok I have a super squeaky boot and it drive me nuts. Its not the rubbers they have been recently changed. I noticed the other day 1 side is more shut than the other. I need to lower the drivers side by about 10mm I have attached pics so you can see the difference to each side before the hatch engages (1st 2 pics) and I have a pic so you can see how open it looks one the hatch locks the boot into place (last 2 pics) Is there a way to adjust this on the hinge or something? Could It be the gas struts not allowing it to close all the way? Thanks Paul

Bump

Hi all. As I have no upgraded due to the end of my phone contract so I have my Samsung Galaxy S6 Edge in pearl White with 64GB built in memory. This phone has lived most of its life in a case and it is great condition with no cracks or chips. There is a tiny mark at the top and a tiny mark on the side, its barely noticeable, as you can see from the pics, I had to get up really close using a high res pic to see lol. The battery life is in good condition and the phone is fully functional in perfect working order with the latest update. Its Sim Free with no network start up screens. The phone will be fully reset so It will start up like it would from new when you get it. I have looked after this phone very well and it hasn't missed a beat. One of the best phones I have had. Info on the features can be phone here: http://www.samsung.com/uk/smartphones/galaxy-s6-edge-g925f/SM-G925FZKEBTU/ These usually fetch for over £250 + Delivery on ebay but I am happy to sell for £220 + £10 Delivery. I can bring to Japfest if you like. Pic Below, Thanks

Look a clean example.

Bargain

Yep there silly cheap at Toyota,

Ok thanks lee i will give that a shot.. Edit: Tried that, I get told that the value is missing and just sets it as "Spare"

Dash2 Display with carbon Whifbitz surround Integrated Toucan Screen Heater control L.e.d.s redone with new buttons Ritchbrook handbrake, gear knob and gators Chrome surround at gear knob gator Kenwood DNN9250 Head unit MOMO Millennium evo 2 wheel Painted dash to colour code with car

Hey all, I'm just resetting up my Frame Content in Custom CAN as I downloaded the new datasteam file for my Toucan display and all the settings have gone for my Dash2 Display. I have done everything except for column 4 row 14 which need to be KnockStatus(U) but its not in the list. If I load up my current DAT file (before importing the new JTI datastream) its in there but if I try to change it (to see where it is on the list so I can find it for my new file) it says "Warning - Inavalid Calibration Value" 1st pic is my current uploaded file to the ECU. 2nd pic is what I'm currently trying to sort before uploading to Syvecs.

Thanks guys