mark newman

what cams have you got fitted.

As Title and if valve clearance can change , would the clearance get bigger or smaller. any help would be good, as I'm trying to find out why after the machine shop shimed my head , they or now to small, and need to be re-done. machine shop said that they were done right. the only way that they have changed is that my valve springes are to strong at 110 pounds and are pulling the valves into the head,? or all changed when i bolted the head down. most of the measurments are at 0.15 that is on the in and out. What would you think. EX IN 12 0.20 12 0.10 11 0.15 11 0.10 10 0.20 10 0.15 9 0.20 9 0.15 8 0.15 8 0.10 7 0.15 7 0.15 6 0.15 6 0.10 5 0.15 5 0.15 4 0.15 4 0.15 3 0.15 3 0.15 2 0.15 2 0.15 1 0.15 1 0.15 ---------------------------------------

Yes thanks for that ,did your valve clearance get bigger or smaller when you bolted the head down.

yes cam to bucket , so if I got 0.015 intake and 0.015 exhaust , and 1 on the intake at 0.005 . and 2 at 0.010 . exhaust goes from 0.015 to 0.020 Have I got a problem

Hi i need help with valve clearance , what would be the clearance for the inlet, and what would it be for the out let. would you set them the same . thanks mark

I will be there Testing on the 5th and racing on the 6th . if he dyno goes my way , on monday .

yes that is the plan , 1st race japshow , all going well im sure Ryan will sort the mapping out .

you my be ok Chris, the car has pass the mot , but it will not go on boost at the moment , and is missing just like that plane .

your right its only 88mm with 3.5 bar boost im up for a race.

should be there all weekend , car is ready Mot on sat morning , so that gives me about 2 weeks to have some fun on the roads before the first race.

Be nice to see this go on the strip Chris. I might have to give you a little race on the sunday .

bpu with a cat . No

should be saying 2.4 bar not .4 bar.

No he got me a new set within a week.

give Jeff a call Trackstuff Racing Fuels and Tyres - High Wycombe ... - Facebook

nice work

It would cost that to build ,

http://www.eurodragster.com/live/webcam/default.asp have alook hear now for tips Chris

1. KamaSupra 2. Big Supes 3. Soopra +1 4. james_cbr +1 5. GreaseMonkey 6. Gretie22 +1 7. Sabrina 8. MattDavies 9. TT Paul (Maybe) 10. Stevie B (Maybe) 11. Steve.M (Maybe) 12. jimojameso (Maybe) 13. Silversoop (Maybe) 14. dodec "j" (Maybe) 15. mark newman { maybe]

crank sensor ,make sure that it is pluged in .

you need gas fitted

its looking fast , even without the engine . good job

dont buy one yet as i might have got the wrong one as I have fitted a atm crank pully , so this might not fit, for me .

oh yes I have a ats crank pulley , just orderd it now , so it might not fit .

Bando 6PK1865 OEM Quality Serpentine Belt http://www.ebay.co.uk/itm/Bando-6PK1865-OEM-Quality-Serpentine-Belt-/161217086050?pt=LH_DefaultDomain_3&hash=item2589498262