mark newman

yes I will have ago again over the weekend its only about 3mm it should fit. mybe it got abit late last time I had ago at it . a new day and that lot. tanks dude.

yes that could be one, weld the ic pipe direct to the housing, nice one Jamie.

Started test fitting the new kit it's going to take alot of custom fabrication to get everything done nicely. I had problems with the 5 inch down pipe touching the steering rack and i couldnt get it to line up with the turbo. So i spoke to Full Race who said they have never had one of there 5 inch down pipes on a RHD supra before so its now custom fitted and fits perfectly. I also have to re-route the second screamer pipe to the front of the car next to the other one as there is no room for it to go down the back. One problem i am going to have is connecting the turbo to the FMIC, I need to find a very slim 3.5" V-Band clamp as the one i have to big and touches the manifold. Any suggestions? And next to a S366

how much will be needed to fill a 2jz , as this is not cheap . but I think I will give this ago.

i will be changing mine to this.

yes Ryan has programed it to come in at 60 mph , but I think that is a little bit to late as I change gear at the end of 60 ft and that is when I need it to come in so thinking about it I will get him to change it to 50 mph now and see what happens.

thanks for that

Can any one work this out for me . I need to know what speed a car is going at this point 1.5 sec 60 ft as I need to work out when I have the Nos switched on . any help would be good.

that will be a must , have . - - - Updated - - - and drag wheels and tyres ,

it will be fine I am going the same way at the moment but not with a 80 mm but a 88 mm. I like to see anything getting away from me at the lights

yes only if its a kitchen and bathroom, I can do you a good deal supply only if you want, cheap.

Do we go with new of SH alternators and how must of a job is it on a single? I fitted a new 200 amp on mine yesterday 15 mins work , on a single

start off £1000.00 if its broke

what is the total cost of this kit looks good

I have not seen any good batmowheel borg warners turbo graphs yet has any one got one that they could post up.

http://mkiv.supras.org.nz/members/kevin_th400.htm

what sort of warranty are you giving with this box ?. and would the warranty depend on what power you put through it. and how would you sort that out. a dyno on the car before it was fitted .?

just cut it off and blank it off.

what is needed to fit a th400 to the supra .

thinking of building a supra again I new you would get bored with the GTR:D

the only thing is that it will make ryans work easier with bigger injectors just to keep it safe , you know that you will want to crank it up to 1100 bhp.

If it was me i would go for bigger ID1000 injectors mybe 1600 or 2000 for that set up .

if that is the case you can go first Rob and let me know.