stel

Yeah that's sold . Turbo kit still available. Open to offers on the kit .

Up we gon

Open to offers .

Hi all Decided to split the engine so the turbo kit and damper is for sale . ATI is new and only test fitted . Turbo kit is almost new . One dyno session and the 60mm tial wastegate is brand new Turbo kit is £2500 Damper is £350

Up we go .

Hi all My cousin has ask me to help him sell a engine . Engine and hasn't run yet. So it's ready for a super project . Everything is new . £8500 Hks 280 cams OBX cam sprockets Arias pistons BC rods calico bearings 1mm oversized valves bc springs and retainers oversized cylinder head ports Custom manifold ( Pipes are a larger bore than the greedy and HKS ones as they don't make turbos this big Garrett gt45, tial wastegate 60mm custom oversized inlet manifold ATI damper pulley Injectors are not If you have any questions pls let me know and I'll forward it on . Pls keep any sarcastic opinions to yourself .lol

Hi all I'm selling my cousins gewalts which he has had for about 2 years now.. When he bought them they needed a refurb,bit this wasn't done till the middle of 2015. These wheels were bought of a mk4 supra owner who had these fitted to a mk4 supra . All four wheels split, centres and dish painted grey . Barrels have now been welded together so the wheels are now a 2 piece . The only part missing is one if the gewalt stickers that goes in the middle of the centre cap.. Sizes 18x9j front offset unknown but with a 20mm spacer on the fronts the rim and tyre is just about level with the arch .. S13 200sx 18x10j rear offset Is about +35 .rear arches needed a slight roll with a 265 tyre.. S13 200sx 235/40/18 hankook like new 265/35/18 5/6mm p zero tyres also like new £600

Hi all I have a Garrett GT4202 T4 flange.this thing is a absolute animal. Removed from a rx7 after 3 miles due to RTA..I was going to fit it to my s13 2j but stayed with the t88.. Lol Exhaust housing is A/R 1.15 Compressor housing is A/R 60 T4 V band Like new £1000. Stel

Hi all I bought this to fit Into my s13 but too much of a ball ache . Lol It holds 4 x 60mm gauges and two other units .. Boost controller or a turbo timer. There is a crack inbetween the gauge holder but still fitted well. [ATTACH]150612[/ATTACH] [ATTACH]150613[/ATTACH] [ATTACH]150614[/ATTACH] Not sure what it's worth as it needs a bit of tlc.! £60 posted ? Stel

is the gauge 52mm

this is my cousins car.. hi all im selling my daily runner as im on the hunt for a bmw e39 diesel . i have owned the golf for about a year now and its been really good with no issues apart from new tyres and new coilovers fitted.i have also fitted new vw brake pads all round and oil change.there is full history upto 80000miles and the rest of the service have been done by myself and the previous owner. the car has just got to 113000miles and still pulls well,clutch still has a nise biting point.the suspension has a firm ride but handle really well.as for fuel miles i get 380-400miles on a full tank and that with the 18s.mpg as we all know is around 50mpg on a run and around town i get 27mpg spec 1998 s reg tdi gt 110 bhp black 5door brand new coilovers 18" alloys with brand new 225/40/18 tyres aircon vw single cd player and tape player mot until december 2010 tax until june 2010 interior is faultles no rips on the drivers seat. there is a few bad bits but only on the bodywork.there are stone chips and a couple of dents on the bonnet,n/s front wing has surface rust on the arch,boot handle has rust around it,rear bumper a scrap on it. im after £2500. 07932 418215

sold to me.

hi it does come with the sensor right?also how much collected as i need it a.s.a.p. stel

hi mate its for a soarer 5 speed box

hi all i need a gear shifter stick complete with rubber boot for a r154 gearbox. thanks.

hi mate do you have the complete gear stick with the rubber boot price?? thanks.

I know the the jap boys are using the 2jz block with a 1jz head that works well.

thanks mate.

can some one tell me how many liters of oil does the r154 gearbox take. thaks

TRD stat opens at 70 and a stock stat opens at 82 i think, I might go for the TRD one in the end???

the rad is fine and brandnew,my cousin is using the same one on his drift car thats doing just fine.i think my problem is the way i have fitted the fan on the outside and is pulling the hot air towards the intercooler.

i am using a thicker ali rad.there is no room to mount the standard viscus fan in the s13,so i have mounted a one electric fan on the other side of the rad.i have found a couple of thin electric 12" fans so im thinking of cutting my slam panel to move the radiator forward so i can fit them as normal. do you think it will make any differance if the fans are on the outside of the rad or in the inside?

thanks m8..so i will need to adjust my temperture switch also to come on earlier then.

hi all need some help please.as some of you may know that i have a s13 200sx with a 2jz engine fitted..its been a long project and has gone very well. since we have had the engine running the water temp has always been around the 94c mark on idle.yesturday was the 1st time we have driven the car after 2 years of hard work and was going really well.then the water temp starting going over the 100c mark.all we was doing is a light tune with steve @ fctuning with my haltech pro 2000. so lastnight my cousin removed the thermostate and its still the same.i have a feeling its my radiator fan as i only have a one fitted to my alloy rad.. what i would like to know is what do the 2jz runs temperture wize?on idle and cruising around. many thanks stel

will do!! thanks..