Jump to content
The mkiv Supra Owners Club

Stealth-1JZ

Followers
  • Posts

    140
  • Joined

Everything posted by Stealth-1JZ

  1. card name was elizabeth bracken but i told them my name was damien murray
  2. any idea about sat night ? i never recived confamation after i sent on my info
  3. heres a wright up i done on brakes for a site a good few years ago that may interest some of you
  4. i just ordered DBA 4000 disks allround for my uk spec breaks the 6x6 sloted ones id also say get a fluid change,maybe get braded lines and better pads aswell.
  5. just a reminder 9am sat in the red cow luas park and ride any 1 need directions or help let me know
  6. so every one all set ? i went and gave the car a spring clean the weekend http://img4.imageshack.us/img4/4261/22032009155.jpg
  7. was talking to murv from SO another friend of mine whos part organiseing the convoy.we are defo heading the N4 way if u wont send me your number and ill let u know when were near althlone if you wont ? @Fearless i'll pm you my number,ill meet you at the hotel
  8. no i never asked for the AFR print out but i can ask nick for it id say as i know it was mesured.when mapping nick was checking for DET allright ya Cihan is still active on soarercentral down under and dose alot of the mapping on there for members. are you comeing to galway marty ? i think actuly experanceing the prob would better explane it
  9. well i would guess the strate forward route would be out the M4 till near Kinnegad,on to the N6 head for Athlone and carry on till galway but maybe the SO guys are thinking out the M7 to Portlaoise,onto Birr and out the shitty road for the N6 and galway
  10. exactly what it dose say im siting at 30kph/2500rpm and plant the boot,shell rev to around 5K rpm hit a bar and away she goes like shit off a shovel LOL but doseant realy move till it hits a bar/5K rpm Cihan a realy good emanage maper in OZ sugested it was due to the factory computer pulling timing because of knock onset by .. too much timing. said to try progressively pull 3-5 above 4.0v degree's between 3000-4500rpm and go from there ? i have allready looked at a cooler,ATF temp gauge,rebuilt valve body and better converter. if i get them you know ill be right up to you to fit them as u have done most of the work on the car so far ? LOL oh and i changed the 2L or so of dex II in the box sump the day before the map
  11. yup we might as well all meet up at the same place so i'll be passing that hotel if your not shure about geting to the luas park and ride ?
  12. Well i went out this morning to get the soarer mapped The results @15psi were 291 rwhp 370 ft/lbs est. 350hp @ the fly Here is a HPxSPEEDxTORQUE sheet http://img217.imageshack.us/img217/9226/roadspeed.jpg Out on the road when i plant the right foot there is a good bit of a delay before it starts to move. The mapper said it’s almost like a slipping clutch. Could this be a sign the converter or gearbox is on its last legs? Or something else/worse Modifications: blitz BOV Apexi power intake A01B LSD blitz nur spec R cat back and decat Greddy spec R FMIC walbro pump aremotive FPR e-manage blue e-o1 boost controler @ 15psi std 380cc injectors denso ik22 plugs
  13. right well the skyline guys seam tobe meeting at the redcow luas carpark just off the N7 LOL since the right way to galway is out the N4 i sugest we meet at halfords in liffey valley and ill try arange to meet the SO guys on the N4 or do we all wona meet at the red cow luas ? i was going to say we meet up at 8am sat morning there ? is there still guys comeing from the UK ? do u wont me to meet you ?
  14. ill be there for the day with DTD so ill pop over for a bit
  15. ill be sticking a thread up in the week or so about it,just have to talk to mick from SO 1st
  16. plan is to leave early sat dep if i have to meet ppl off the boat. liffey vally is prob the easyist spot to meet up.ill start a new thread on it tomorro
  17. DUBLIN LOCATIONS GALWAY LOCATIONS u could meet me at liffey valley shoping center just off the M50/N4 if u wont should i throw up a thread in here about the convoy ? do any of the uk members wont me to meet them at the docks or can you find your way to the above location ?
  18. u got RO rails ? and they fited the evo seats ? just got a bit lost in the thread. im geting evo 6.5 seats and im trying to find out what rail to get
  19. can any one tell me if the bride subframs will fit a recaro speed into a mk iv ? i realy need to change the seats in my soarer and iv been told subframs from the mk iv fit the soarer,i can get bride frams easy enough but need to know if it will fit a recaro
  20. right well any of the UK members that wont a quote for the boat pm me let me know from what port,what time roughly and what days you wish to travil on. i had posted a price in the other thread aswell here it is quickly,im not shure if its still the same tho
  21. i can help with the ferry if needs be ? im shure myself and mick from SO will be arrangeing a convoy across from dublin aswell
  22. ya had the cam belt/timeing belt on the list no mines auto but i change it every 15K km [well what i can drain of it anyway]
  23. well iv been runing bridgstone potenza re050A's for the last 2 years and cant falt them on the road or track just make shure there jap and not the eastern european ones as theres is a slight diferance iv found the 888 i found to overheat on track tho and as said above there not good at all when it comes to standing warter imho
  24. Engine Specifications: 1JZ-GTE twin turbo Turbocharger & Induction: OEM ct12a turbos Apexi power intake Greddy Spec-R FMIC Fuel, Tuning & ECU: Aeromotive FPR Kit walbro pump OEM 380cc injectors unmaped Greddy E-Manage blue Greddy e-o1 boost controler Exhaust: 2nd hand mkiv decat Blitz nur spec R cat back Drivetrain: stock auto [not for long] A01B LSD Weight Reduction & Transfer: N/A Suspension, Wheels, Tires & Brakes: BN sports inverted coilovers 18" rota P1 alloys bridgestone potenza RE050A tires big supra breaks all round APP braded lines 17" UK mkiv wheels [soon to have MT streets an the rear] Interior & ICE: defe gauges Exterior: 8000K HID high and low beam OEM wind deflectors Performance: Max power - 250bhp @ rear wheels Max torque - ??? lb/ft Max speed - 158mph 0-60 - ?.? seconds
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.