bobapple
-
Posts
419 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by bobapple
-
By the sounds of it you don't need a mega graphics card or processor just a big hard drive . Will look some more.
-
Top end of the budget but this seems to be a decent laptop though I am an Apple fan so I maybe wrong . http://www.pcworld.co.uk/gbuk/samsung-np-rc710-s02uk-17-3-laptop-black-silver-09785397-pdt.html I do know though their is no point in going for an i7 processor unless your doing big video editing at a professional level.
-
Yea gonna leave them, Scott's right can just twist them. Thanks for the input gentlemen.
-
Hey probably another silly question but , but am I ok to change the clips circled in the picture, for jubilee clips as those ones keep shredding my hands when polishing my pipe work . So if I can which are good ones as I have heard halfraud's are not that good to put it politely ( in none sweary terms ). Thanks Si
-
Smarty pants .
-
Are the TRD thermostats worth a look into or only really necessary if doing track or hard abuse.
-
Slower than 89% of GB thats harsh .
-
You don't have one of these do you? The bit pointed out in purple .
-
Little vid I just found quite funny (98 is looking dated )but good info on the Supra trac system.
-
Just incase I haven't named it correctly heres a pic its the piece pointed out by the purple arrows, and my apologies for the poorness of the arrows .
-
Yep . Thanks
-
I am looking for the throttle control motor it lives on the right hand side of your throttle body, if anyone has one lying around after going single or just from removing traction control, please let me know will pay of course. Thanks Si
-
Hey everyone, does anyone know if you should be able to move the first throttle butterfly the one thats worked by the motor with the motor still attached ? As just popped my inlet pipe off and it wouldn't budge on mine. Thanks Si
-
I need it to measure some connections on my car, between 2 terminals, it needs to be able to measure down to 0.42 ohms and up to 14 volts for 2 different tests. Thanks Si
-
Cheers mate thinking of future mods, wanted to go to the bigger injectors for a while.
-
Hey nice result, did you say your running a AEM ecu to get full advantage of the 550 injectors. Thanks Si
-
I need some help on which multimeter to buy, I need one which measures volts and ohms. It could also do with fine terminals which are on a lead as I may need to check things in some tricky places, don't want to spend a fortune as this is just to work out my trac cont issue. Thanks Si
-
As title says after one of these as I cant work out whats up with my trac control, and I think the butterfly is only partially open. Many Thanks Si
-
Just took the bottom of the relay box off checked wires and cleaned with spray, but to no avail, it has several wires going to that relay, if only I knew which one was which more reading I think unless someone can shed some light .
-
Nice vid, Supra sounds mean.
-
Check your bottom rad pipe mate, I think its in the deep dark depths of the front left part engine bay. That would be first port of call. . You wil obviously need to get some Toyota Red coolant as well, Toyota sometimes stock it but worth a call first.
-
Does anyone know if the trac relay sends or receives power from the throttle position motor? Thanks Si
-
I might be able to do something with that to get a good print you want about a 30meg file, roughly 15meg will do you about A4. Drop me a pm if you want me to have ago.
-
Hey mate, whats not the best , it still might be better than mine, is it starting to split in the middle. Thanks
-
Ferrari 330 TRI/ LM http://www.supercars.net/cars/557.html Lovely motor. Still have the model I had as a kid somewhere at my ma's house. Also had a pic of this on my wall