Lurch

No no no. Wanted more of a colour like the colour they are now minus the rust. I dunno black might be ok?

Have you got any photos? Might be too much black on my car?

Hello, I've got these bucket seats in my car.. and was wondering if 1. I can put harnesses on them and 2. Can I get lower sub frames for them... One more question... What can I do about my brake discs? they are new as you can see and looked good before they started to rust. How can I stop this from happening? Can I paint them? (I know the disc grooves are the wrong way round, I bought it like it will change them around when I de rust them)

Hello. I've finally got round to removing the spoiler ECU, but still no difference what so ever. So I tried disconnecting the battery for 10mins, but still no difference. Tried bridging te1 an e1 again but still nothing... any ideas?

Sorry, I've got the 2nd one now. Just need the first one now

might have to spray mine instead then. Thought it would be cheaper to buy one...

Well I bought all the spray paint before realising that my spare ones were black inside lol. Plus what ever ones I dont use I can sell as refurbed. I know the front end is bad. Want to repair and spray the splitter black and highten the front as its lower than the back I think.

As title says. Local as possible as I'd have to collect. Need the bumper in good condition

I just refurbed mine... Old: New: Or maybe with the eye brows back on, what do you think?? Got a set of chrome ones to refurb now. Going to spray them black but keep the chrome rings, then decide what set would look better...

It doesn't matter. As long as you've lowered the front the same amount as the back, the difference between the too will be the same as standard...

pleaseeeee.....

dibs on both decats if other falls through

O right. They dont look like they've been split as they are very yellow (well they were until I refurbed them). Must have done them when they were newish. I cleaned mine with turtle wax glass cleaner (for plastic aswell it says on the pot). Then I polished them with compound to get them smooth as they were very scratched. But just try the cleaning part first

£46.50

Anyone?

Anyone got any idea?

I've only tried the e1 and te1 in the engine bay. I shall try in the foot well and ill try other contacts on the engine bay plug and see how I get on...

The ! is on as soon as I turn the key, Never goes off. Appartently taking the spoiler ecu out stops the ! but I'm not sure.

Yea, that is all true and brake fluid is topped up. It had brand new brakes when I bought it, maybe they've knocked a sensor out or something? I'm pretty sure they've done something to the rear abs sensor thats causing the slip control off button to flash...? Shall I try disconnecting the speed convertor? (Would that be near the ECU?)

Ok. Thanks for your help. I know its been lowered as it has HKS coilovers, but I think its been lowered at the front more than the back... So if anyone has the measurements from the center of the alloy to the arch lip front and back (even if its been lowered) so I can see what the difference is, I can then see if mine has been lowered at the front too much or not so that i can straighten the car up a bit so it sits level.

Any ideas anyone?

Thanks... Any Manual Cluster wanted then please...

(Edit: I know that the discs might be the wrong way round (I bought it like it). Apparently some are supposed to be this way around..?) I know that all car's heights will be different, but wouldn't the difference between the front and back be the same if both front and back are lowered the same? e.g. If someone lowered there car 60mm and the front arch to the middle of the alloy measured 120cm and the back was 100cm. The difference being 20cm. If somebody lowered their car by 80mm the front would be 112cm and the rear being 92cm, the difference still being 20cm? Does that sound right?

I just guessed there was. Not sure if there is or isn't?

Hello, Could somebody be kind enough to tell me what the length is from the middle of their alloy wheel to the arch lip on the front and back of the car pleaseee. Reason being, the supra I bought seems to have been lowered more on the front than the back... Thank you