bradleyh_15
-
Posts
4349 -
Joined
-
Days Won
64
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by bradleyh_15
-
Hey, Does anyone know the fitting sizes of the brake pipe where it goes into the abs pump and the fitting size/ type where they go into the braided lines from the calliper? Thanks in advance
-
Only things left in it now are the dash, front seat belts and sub frames are back on going the same colour 1A1
-
Give my build thread a follow mate glass came out today and the rest has been going on over time. Paint booked for 28/06 then get it back and back together then engine in
-
Glass out, new petrol tank filler neck cover and hopefully fit the petrol tank and a couple of other bits tomorrow and Monday
-
Another slight update, glass is now out and the petrol tank filler neck cover is here
-
What pictures you need? I maybe able to help as Iv done a full strip down and rebuild and the subframes are back in
-
Thanks evin, I’m trying will be looked after well by SRD when they fit the engine to.
-
Boring update petrol tank ready to be put in and looking nice and pretty
-
Thanks Peter it’s much appreciated
-
Rear subframe in today so coming along nicely
-
Looking for a Steering wheel column cover upper part only. What have you got?
-
Got a few quotes from companies and they were all extortionate and then asked a few people and they recommend royal steeringwheels who came back with a very good quote. One of my mates works for a camper van builders and they use them as well as his boss who buys and sells lots of high end cars so should be very good http://royalsteeringwheels.com
-
Surprisingly well made and so simple to fit. Would recommended it. Slots well onto my axle stands to
-
Thanks a lot, taken a while but well worth it
-
A couple more bits done today, front subframe on, including the AP brakes, suspension, all the arms and the zenith auto works jacking point system. Must admit I’m pretty impressed with the jacking point system Especially the rears they sit so well east to fit to. Would 100% recomend and they are already in use as it’s back on axle stands
-
Yeah done all the cavity’s yesterday to, can’t remember the name of the stuff. Will double check tomorrow when I’m up. That’s the thing about stuff like this you never know what it’s going to be like until you have done it and time passes I mean the underside of mine was still in really good shape but why not give it a refresh when the opportunity arises
-
Used raptor as Iv seen really good reviews and done a test of that and some 3m abs the raptor seemed better but only time will tell really happy with the end result of it though
-
Changed a track, let’s try that again
-
weird! Looks like I will have to change the music
-
I had bomex side skirts from knight racer and they were spot on
-
Also thought I would make a video of from when I took the car off the road up until now. Feel free to have a look and any feedback would be good as when it’s finished will help when I make a video for that https://youtu.be/KAkweiWGE3M that link didn’t work, Iv posted a new one further down
-
Soooo I may have been a little excited and forgot to get some pictures of the underside fully stripped back however I have finished under sealing the car and will get the sub frames on tomorrow IMG_2223.MOV
-
Just drying out the car with an industrial heater and a heat gun and came out the heat for a while so made a little montage first one ever so it’s not the best and had to restart a YouTube channel as I can’t remember my password for the original
-
Another little video, as you can see my mate was being really helpful at the end IMG_2167.MOV
-
Thanks mate, painstaking that’s for sure
