sparkystav

were collected yesterday and on route to you sir.

yes thats what his circuit does. it was designed to relplace the TTE "black box" that comes with the Lexus IS200 supercharger kit. I will get his details and PM you both, Marc

The greddy bcc is just a voltage clamp If so I can put you in touch with a guy who makes excellent versions of them if you want a new part. Their not BCC's but they do the same job

Still not even offers!

No interest at all? Full uk rear setup? Just needs pads and one spring?

bump?

Right I bought them to fit to my IS200 to match the fronts, but the engineering is too complex to make it worth it so their back up for sale. The setup isn't complete but comes with all the important bits: 2 uk spec rear calipers 2 BRAND NEW rear disks Chris Wilson caliper pins All shims Both retainers Also: 3 uk specs pads part worn 3 standard pins 1 retaining spring The drivers caliper The passenger caliper The passenger caliper has had a small section ground off, this was during the trial fitting onto my IS. It is only small and does not affect the caliper at all You can compare the two here: The whole lot weights about 20kg so postage won't be cheap but I'm will to post at the buyers cost. After £230 for the lot. Edit: Just checked and using parcel monkey I can post the whole lot for around £12 fully insured next day courier.

I'll have the alternator pully pm on way.

Second dibs on the pads if they don't sell, cash waiting, let me know

Just the controller. If anyone's upgraded Theres to a digital then I'm interested in your old manual one. Doesn't even have to work I'm pretty sure I could fix it. Let me know what youve got. Thanks

Pm'd mate

new gauge pics added

Bump!!!! will listen to offers on everything as their just sitting in my garage

Your pm box is full mate, how much delivered for these?

no other interest?

AEM gauge added

SSQV sold!

AEM temp gauge Good condition, comes with all water, oil, and trans temp faces in black and white, also silver bezel SOLD FSE Fuel pressure regulator and gauge: Good condition, comes with a gauge as well. £55 HKS SSQV SOLD Odyssey PC545 Gel battery Excellent condition, comes with holder as well few specs: http://www.odysseybatteries.com/battery/pc545.htm £70

1. Marco79 - purple (will confirm size once measured ) 2. Sparkystav - Blue 4" 3. 4. 5.

no problem mate

basically, remove the wheels, undo the caliper and take the discs off, leaving you with just the hub. then basically knock the old studs out with a hammer, put the new ones in, then use a washer and a nut and pull them through either with a ratchet/breaker bar/impact wrench. IMHO a better way to do it than the bolt on then bolt wheels to the spacers types.

LOL i put them about. They are slip on ones, but come with longer studs. so like the cheaper ones but better made and comes with longer studs. Fairly easy to change the studs, i removed these today and refitted standard ones (ive bought new offset wheels) and it took me maybe 1/2hour-1hour.

Right clearing out my spares: 15mm Hubcentric Toyota/Lexus spacers with longer studs Genuine H&R Part number: 30656014 Bolt Pattern 5/114.3 Center Bore 60.1 Stud 12x1.5 DRS Style Toyota Camry 92-Up, MR2 91-95, Supra 86-92 and Lexus IS300, LS400, SC300/400, GS300/400. £50 3mm spacers Generic type slip on Multi stud 2 Sets £10 each set 6mm Spacers Generic slip on type 5 stud £10 Longer Toyota/Lexus wheel studs 54mm total length (standard 46mm) Only 9 though £10 All prices plus postage

second dibs cash waiting if Mike drops out

Bump with a price drop on the alloys! come on people these need to go!