Jay_vr6
-
Posts
604 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Jay_vr6
-
I have 2 good spare turbos for a 1jz if that helps
-
power supply
-
wanted Polystyrene tool kit holders that go around the spare wheel
Jay_vr6 replied to tony1's topic in Parts Wanted
I have some mate, not sure what they are worth though -
well it fits my hks hi power so yes bud I'm near hailsham buddy so only round the corner. I was thinking £30 cash ?
-
well i have one from my na which is the same as the TT and i'm in East sussex
-
same here lol
-
wanted jspec 16" alloys just to keep the car shell rolling
Jay_vr6 replied to Jay_vr6's topic in Parts Wanted
how much did you want for them ? -
I want to remove my alloys and brakes to do some tidying up but could really use a crappy set of jspec alloys to stand the car on for a while, the car won't be driven anywhere so no worries about bald tyres etc etc.
-
if its the same as the one on the mr2 it's an awkward 70% one way valve, or so they say same setup on both, although on my mr2 mine fell apart on removal recently, it's made no affect whatsoever. I do have a spare 1jz bov and valve if you can't find one, toyota wanted £38 +vat for the valve when i enquired a month or so ago
-
I have one of my spare ct12a sitting in my hand, its standard, the hotside is ceramic I believe yours look bog standard to i'm afraid..
-
1jz superthread revival Loads of 1jz supras about now
-
According to just tyres website . Tubes in Tubeless Tyre Inner-tubes of the correct size can be used with tubeless tyres if they are correctly fitted. Please remember that by fitting tubes in tubeless tyres, in the event of a puncture, the assembly will behave exactly like a tubed tyre – it is likely to lose pressure more rapidly than a tubeless tyre assembly. Where tubes for certain low profile tubeless tyres are not available, an alternative size tube should NOT be fitted
-
I did the same thing in January, supra in garage for some loving and got an mr2 turbo, hate it hate it hate it hate it
-
14" ? are these from a rev1 mr2 bud ?
-
I have a profec b spec-2 sitting here with all new pipework for fitting to a supra TT
-
hmm I have an r154 with brand new toyota 1jz bellhousing inc shifter but no prop I may be willing to part with
-
if its 2jzge listed on your v5 then you get to have the older non cat test unless i miss your point..
-
for sale Rear jspec lights with clear indicator conversion
Jay_vr6 replied to Jay_vr6's topic in Parts for Sale
Yep I do forgotten all about them to be honest. -
i have one in silver if your interested
-
does this have the optional lsd fitted ?? where in Hampshire are you located ??
-
imi I had that kit, it was terrible went straight back to the supplier. The threads were all bad and the pipework didn't look to inspiring. just my opinion of course
-
This is a 30th anniversary recaro speed inc Kw supra subframe, drivers side. The kw frame does not have the sliding rails, Kw do sell them though. I will include recaro made sliding rails which came with the seat, it needs welding to the kw runners. I just haven't had the time to get someone to do the work. In very good condition with no bolster wear, i can provide more pics if anyone is interested. £250 collection, If you want to arrange a courier I can wrap the seat up. [ATTACH=CONFIG]125308[/ATTACH][ATTACH=CONFIG]125309[/ATTACH]
-
plenty of online feeds to watch this its ok to be honest
-
for sale Rear jspec lights with clear indicator conversion
Jay_vr6 replied to Jay_vr6's topic in Parts for Sale
bump -
Sounds great! Send me payment details and i'll pay asap