Chrisbeast
-
Posts
192 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Chrisbeast
-
Checked the fuse in drivers side footwell its ok.
-
Ok that would be great, thanks.
-
No it wont budge. I have voltage at the motor connector pins 3 and 5 though.
-
Yep i have all that, cant figure this out!
-
Afternoon all. I have had a search but still un sure about this. I bought a Active Spoiler, fitted it yesterday but it wont work! I can get it working with just a battery but when plugged in on the car the light on the switch flashes along with the ! dash light. Could it be to do with the speedo conversion? Thanks for any input.
-
I had exactly the same happen to mine last month. You could probably get one second hand off here or get brand new from Mr T. New one will cost about 55 quid.
-
Yep it pulls off, its held on very well! Once a few of the clips are out it gets easier. Be careful not to snap it in half! You'll need a deep reach 10mm socket to get the light unit out.
-
I've just re-soldered mine but I have 4 leds that still do not work, where is the best place to buy them?
-
Keron would you have an Active Front Spoiler available? I currently have the under tray, switch and ECU so really just need the motor and mechanism/lip but would buy complete! Thanks, Chris.
-
Bumpety bump!
-
9/24
-
I dont really know what they're worth but saw one on here a while back up for £70. Can you post up pic? Thanks.
-
Hi all, I am after a Active front spoiler in good working order.
-
Looks like some of them are trying to go for a dump!
-
Here I am, and one with the dog!
-
Found this on ebay, you would need very long arms and asbestos legs! http://cgi.ebay.co.uk/48-Cylinder-special-at-Red-Dog-Superbikes-Herts_W0QQitemZ260421562546QQcmdZViewItemQQptZUK_Motorcycles?hash=item3ca255b0b2&_trksid=p3286.c0.m14&_trkparms=65%3A7%7C66%3A2%7C39%3A1%7C240%3A1307%7C301%3A1%7C293%3A1%7C294%3A50
-
Superb!
-
Heres a link for you http://www.mkivsupra.net/vbb/showthread.php?t=56684
-
Yep its in the middle of the flywheel. Remove it by packing a load of grease into it, then you will need to find something that will fit into it nicely, maybe a ratchet extension bar! Tap it in, the grease should compress and push the bearing out. You may need a fair amount of grease!
-
Lets hope your fingers dont end up looking like those of Mr Salad Fingers!... http://www.fat-pie.com/salad.htm
-
Was on Friday, gun metal grey and had a Veilside kit on.
-
Saw you at about 4 o'clock leaving KFC, sounded very nice!
-
Have you checked your diff oil? Maybe something to do with the Flywheel assembly, as standard they have a damper. Mine is a little vocal sometimes during engine braking! Hope its nothing to bad.
-
Any more news on this? Would like to see some pics as the sun has decided to come out, for a while anyway!
-
Saw you at about 4:45 at the East Hill roundabout heading down to tuckingmill you turned left near the hotel.
