L18msy
-
Posts
2796 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by L18msy
-
Yeah cataloy is the p38 filler, we also have stuff called top stop with is polyester resin which is easier to rub and leaves a better finish for paint. Think it costs a few bob a tin! Use a nice fine paper on the p38 will leave a good enough finish. Good luck with it
-
Dont they empty our wallets enough?
-
Mmmm need a plan b then
-
Surely not!! 70 is way too low in this day and age with the technology in cars today. The driving tests are harder today than what they were when i passed, so hopefully better drivers should be appearing on the roads. They should be looking at raising it a bit.
-
120 should be fine it may take a while to rub down though:D I dont think there is anything out there that is really flexable. I work in a bodyshop and we use fibreglass, cataloy or a special bumper repair stuff (cant remember the name just now). That bumper stuff is black and it is like a mixture of cataloy and fibreglass mixed together, even when it dries its still pretty solid. I think the only answer is to avoid the speed humps matey or stock up in repair stuff:d
-
I have an english pointer who hates being bathed but loves jumping into the loch. Strange
-
Phone a sicky! Easy!
-
Im in the middle of repairing Aldo87 supra after a slight 'off'.His do luck front bumper was in tatters, ive rebuilt it with fibreglass and p38, i have arms like popeye with rubbing all that filler!
-
Received today, good work mate and thanks!
-
Any pics of what you have done so far? I would mesh and fibreglass behind the spoiler to strengthen it.Once dried rough up the outside of spoiler with 80 grit paper,then apply a coat of fibreglass. Rub that down once dry with 80 again till the repair is flat. Then apply a layer of cataloy, rub the rough down with 80 then use finer paper to a smooth finish for primer and paint. The first two are the best, make sure you mix it well so you dont get pinholes!
-
They can be repaired, but sometimes it isnt a case if just knocking the dent out, ive known wheels to crack when straightened then the wheel needs to be welded. Try and find a wheel repair specialist and ask his advice and quotes.
-
I have the same exhaust and it sits just like keeners pictures above
-
1. KSLB 2. marcAB10 3. Monsween (if onshore) 4. Eve 5. mustang 6. renegade 7. Aldo87 8. Greenauto 9. L18msy 10. Stu306 11. TTRickeh 12. JamesS 13. AlanM 14. brucie-bonus 15. Big Ian 16. samantha 88 sorted!
-
pm'd:)
-
good work! lol.Hope you bump into her soon and you can get her to come along.
-
Its mostly motor way for me i think, with plenty of cameras so need to behave:thumbdown:. Are you heading through with anyone?
-
Aberdeen is only a couple of hours away from glasgow.I would be a nice drive especially if we went in convoy. Where are you based alanM?
-
I may be up for this but its a hell of a run for a meet is there nothing in glasgow? We could meet up and go in convoy mate.Hopefully be quite a few from our end heading up.
-
I think it might be registered as a damaged repairable vehicle, maybe a cat c or d write off?
-
a couple of my supra
-
I think ill put the toast and cheese i was having down now!
-
Ayr is about 40 mins away not far at all. I already have glass lights fitted at the moment, i was just thinking about trying something different
-
Im from alexandria. Where are you from?
-
Have any of you guys and gals got any pictures of red supras with the headlamp backing colour coded. I was thinking about doing it to my car.Any comments or criticisms welcome to help make up my mind. Thanks
-
Who has the job? Will we donate it to Ian?
