123tom123tom

here is a link to a thread i have started, it has pics of harness and connection for a emb setup http://www.mkivsupra.net/vbb/showthread.php?t=158378

t61 turbo want about 500+ my goal is to break the 500 mark:)

would like to know more here too....

another valid point;) anyone done this kind of test etc

cheers, just the news i wanted to here;) spend my money else where.

quick easy question for some one out there!! I am installing 650cc injectors on my car and was wondering what is the best -an size line for the return fuel. and do i need a aeromotive fpr, or will the OEM one be fine.

ditto:)

cheers mate all comments are good at the minute:)

i dont know who wired the harness, it was some one on this forum, if i did get a ultimate ecu would it use the same harness etc...

getting there now!! just waiting for some final bits.... or and obviously need to sort that god dam emb out....

right i have just tried another laptop with the same result as before. all com ports are the same the cable definatley works, tried on hecklers emb.... could the wiring of the unit cause problems, i personally didnt wire this unit but the emb unit active light stays on green even when the key isnt in the ignition. Any more ideas guys or am i gunna have to buy a new emb.

yes in the process still need the 2nd decat pipe though;)

as the title states, 3" please

got some more work done on the car today, i installed 3 tranmission coolers for the auto box along with a transmission oil filter, slight problem when i took the bumper off i realised that it had no ducting where the smic used to be. I think am going to fit a spal fan in there too.

spot on mate.... did you go for the coloured stuff then.

i wonder why the emanage software says it is online then i'm confused to hell..... i set the com ports up as per the software instruction, going into the device manager - ports - finding the EMB cable port - right clicked it - advanced - set it to com port 5 on the laptop. Then i went into the EMB software - communication - com 5 seleted, was offline at this point then when i selected com5 the E logo in the top corner started flashing green and the bottom corner flashed up online. would it not corrispond if there was nothing on the main unit?

where you get it from simon

the unit is from ryan g on this forum, i wouldnt think he would sell on faulty goods, unless it has gone like that in transit. i am going to try the other laptop route first then, well i dont know what then, dont know anyone with a emb near by i can try it on. i have done the jumper setting inside as per the guide on page one of this thread and i have also done all the other setting as per the guide, that shouldnt make a difference anyway should it?

yes i think i am going to do that next.... i think laptop can be eliminated by borrowing someone else's, could it really be software it think it is genuine, pic below.... and cable is proven as been working as it is hecklers and he has used it on his. what i dont get is i am doing everything by the book on the install of the software through to the cable. I am then doing it in the order it says, plugging the cable into the laptop then into the emb unit, then turn the ignition on, then opening the software up. the lights are lit up on the emb so that is on??? another quick question is the green light on the unit ment to stay on when you turn the ignition off:)

yes i did do the software update but i then did a fresh reinstall of the software. The only version i can update this software to is 1.13 and that would need the 1.39 firmware for the emb unit, but i cant update the unit as it just says connection failure when i click update and give it the option update info..... so what next??? there is some thing i am missing but i cant put my finger on it!!!!! i hate EMB :( can anybody send me the new version in a zipped file or something..... the actual software i mean not the update..... the cable definatley works as i said before as soon as i plug it in it says emb cable then the software comes from offline to online.

yes i have installed the driver and that works fine, i have set the emb software to com5 and the com port which the cable is on to com5, i have got it the right way round, as you said it does only pick the cable up one way.... every thing seems to be spot on apart from the fact it wond correspond, i also tried to update the main unit to 1.39 and it said there was a connection failure.... maybe it is the software i have i dont think it is genuine, it is version 1.11 which is the first one i think, can anybody tell me what colour the disk is, ie is it black, white, blue:)

right i have just tried the cable that Heckler sent me and i still have the exact same problem..... As soon as i plug the cable in the laptop recognises it straight away and a bubble pops up in the bottom corner of the screen saying EMB cable connected and then the software also says online, even though i havent even plugged it into the EMB main unit it still says on line. I thought this was a little strange (me thinking online means when your plugged into the main unit.) I can not think what to do next it is annoying as hell. IT STILL WONT CORRESPOND EITHER!!!! no movement on the loading bar.:( Any ideas Simon????

anything really that will do the job, not after anything in particular, i'm sure i have seen a car with like, i can only describe it as smaller diametre induction piping. It has that same look, like foil tubing, but if there is other stuff to do the job i guess i will have to look.

does anybody know what that stuff is that you wrap wires and silicon pipe in to reflect heat and where i can get it from.... stuff you wrap round parts you wana protect from heat on a single coversion, like all the o2 sensor wiring etc......

am wanting the 2nd decat pipe, are you offering me a cat hear:)