Zofix
-
Posts
273 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Zofix
-
Thanks Nic, I allready seen those photos, they dosent show how the pipe is relocated... This is the pipe I'm talking about Marked with red roundings.
-
Did you relocate the A/C recharge tube?
-
Hehe I got it GReddy! But I still have problems fitting the IC pipes, they don't fit at all.. I need to relocate that hard tube, it is in the way, but how? I still have 1 more bracket, and in the guide it says relocate the A/C tube, but I have no idea how to do it or where to locate it. I don't want to push or press the tube, if I break something:( Hope you can help me with a photo or just anything..
-
Yes thanks, now I just have a hard time making the GReedy intercooler pipes fit... Do anybody have a photo where the A/C lines are relocated right under the throttle?
-
Thats for the GReedy 3-row m8
-
I made it to the point where you need to relocate the power steering cooler. How come the supplied power steering cooler line is so long? I know it needs to go from the tank down to the left air duct but there is still 1m more, is there something I did wrong? Where do I Remount the ambient sensor? I can't see any brackets for that? Could anybody please show me a photo or anything that could help me! Thanks!
-
no problem m8;)
-
It is so easy, take the buttom tip off so it drain all the oil, reach your arm up from under the car grab the oil filter gently turn it until its off.. When all the oil is drained replug the tip. Screw a new oil filter on, and put new oil on the car. DONE! takes about 10min.
-
ye but the shipping costs to Denmark from whifbitz is extremly high.. 50£+ for a tiny cooling plate.. I had a HUGE FMIC kit shipped from UK to Denmark for the half of that.. I just think 150£ is pretty much for a cooling plate..
-
Looking for a Carbon Cooling Plate in mint condition!
-
-
Did you have any power gains m8? At the same boost lvl as before? I guess it is the GReedy 2-row right?
-
Do it work like it should? hold boost?
-
Which boost controller are you running m8?
-
Do somebody have a pic of a HKS ssqv recirculated?
-
How much for the blitz sus air filter, and how many km on it?
-
Thanks Nic!
-
1.5 bar on stock UK/US twins :O?
-
Yellow4thewin!!! So Nice!
-
OK thanks guys, I will let you know later when I watched the gauge..
-
M8 I dont want to raise it, I'm just afraid it will over boost(1.2bar+) if I floor it again,.. I didnt experience fuel cut at 1bar :S.. And I have been told that a Boost controller can't lower boost anyway:( I just heard my defi gauge warn, and I stopped. I dont know at what pressure the defi gauge will beep warn. I havent touched it.
-
I want to run it safe... Max 1.2 bar.. But I don't want it to boost more than that.. Thats why I'm afraid:(
-
I know it is stupid, but I did hide my control unit, behind the dash.. Didnt thought I would need the peak/record/warning things. So if somebody could give me the stock warning setting, I would be happy.
-
Do anybody know what the Defi Boost gauge warning is set to from start?
-
I can boost 1bar all day long no fuel cut... I will try what u are suggesting Scotster.. But I only have a downpipe and a catback system installed, 1 bar shouldnt be capabel with only this mod? or could it? Thanks!
