Jump to content
The mkiv Supra Owners Club

Scooter

Club Members
  • Posts

    10012
  • Joined

  • Days Won

    18

Everything posted by Scooter

  1. Second post can help you diagnose (again if this is the same as the NA Supra's)
  2. Thanks and no problem, the cold snap and my man flu has set me back a bit on sorting things, so far all posted bits seem to have made it to everyone fine which is nice. Need some of the bulky stuff to go soon, ebay beckons I think....
  3. In the engine bay, follow the large coolant pipe(s?) at the top rear of the engine toward the right (passenger) side and you'll see x2 disappear into the bulkhead. This is the in/out to the heater matrix, if when warm there is a large difference (the 'in' might be hot - careful, the out luke warm/cold) then it's likely a partially/fully blocked matrix.
  4. Yeah still have the pump, I can get you some extra pics etc if you like, just send me a message where you want it sent etc, cheers
  5. only about 350 2002 cars made so a rare thing. If this was 2027 I think the American's would snap this up at this price.
  6. Does this link help at all? I think it has links to a toyota electrical manual
  7. I have some that are old and tatty, would need a complete strip and paint/powder coat, but I'd only want £40 for them so depends what you want. I think they are old 'red' Apexi springs but can't be certain.
  8. I'll grab a pic, it's all one piece at the moment and i think it's everything in that pic
  9. Homer is the clock spring in the bit with wipers/indicator stalks go into? I have an old assembly (one of the stalks is gone/floppy hence why I swapped it out years ago) that I was going to bin that I could send for postage that you could experiment on if that would help?
  10. I think it's like the Supra and under the passenger side foot well. Passenger door trim unclips somehow to allow you to pull the carpet back and then likely a couple of nuts to release the ecu from it's holder. Then on the Supra there is a nut to undo to allow you to tease off the 2/3 connectors to it?
  11. All the best with the refit, it's going to be so satisfying once finished, knowing you've pretty much torqued up every bolt with your own hands. Sure gonna keep you busy though!
  12. Thanks both for confirming, just trying to assess my used arms condition and this helps to suggest they are good to very good.
  13. Just out of interest how gone is gone, just looking to know how to assess a ball joint, is it that it's sort of able to flop around under gravity/very light pressure or can you feel play if pulling on the threaded section etc? thanks
  14. Andy Ven converts these to take a ball joint.
  15. Sorry should have said the undertray is going with the car, it was just a better background for the pics. I'll check for a jack and will pm re the wheel clamp Doughnuts and selection of top mounts
  16. 2nd cat £100 (facelift straight through one ie not sure how much 'cat' it actually is) Arms going to Andy Ven, other bits and bobs available
  17. x2 Viscous fans one minty one ok, £70 or £40 Fan TT £50
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.