brianwe

Hi Martin, How much would you take for the rear brake calipers and brake lines? Would you break this set?

I have had a major issue with my supra this morning, the drive shaft bolts fell out and the spacers have all vanished. Any chance that anyone would have any lying around? Ordered a set from Toyota, but two weeks till they arrive and must get to work between now and then, any help would be appreciated! Brian

Just done the same thing myself, but added a generic fpr it really has smoothed out the trottle to the car, made it a tad quicker on the uptake too! Nice! But the stuff I bought was 1 metre of double braided and stainless outer braid fuel line with a 8mm internal diameter, you should find that works fine, wont wear or rot and easy enough to run round the back end of your inlet manifold, or over by your baulkhead. Hope that helps, try some of the performance stores on ebay too, they might come up trumps! All the best mate Brianwe

Keron, do you have any main seat motors lying about, I really need one as I got let down by a local guy on some facelift seats & deperately need the main drivers seat motor. I pm'd you about this motor a while back and would love some feedback? Just an enquiry though, are those UK spec front & rear calipers, and what sort of money do you usually take for them? They look in fairly good nick too........! Cheers mate!

Hi there Keron, just looking for a face-lift drivers seat motor, if you have one lying around? Thanx Brianwe

Hi there pm sent Brianwe

Do let me know if they're still available, mine are damaged and I need a new pair for my impending mot. Brianwe

I would be interested in the first cat to get through my M.O.T if its in fairly good condition, and useable still, pm me a pic to see and we can talk about how you can get it to me and for what sort of money you'd be after. Bri

I am interested in the battery tray & clamp if you still have these please pm me and we can discuss the cash transfer, delivery and parts you could still have to go with if? Speak soon Bri

Is there any chance you would have an electric seat motor for the drivers side? PM me back with your price on this Bri

Bump........Sold at £300 Sorry to anyone else who was or might've been interested! Bri

Are you sure as your already in the midlands and the engine could be dropped off with you during the week? Mmmmm tempting! Go on as its winter, it would be a nice winter project all ready for the summer! Go on treat yourself?

Well yeah, it would give the Corsa a wild drop-nose Californian sort of look...... Maybe then I should start the bidding at about £275 for the project engine, what do you think? So anyone offering £275 then?

Whose Jezz, I will look him up tonight? Thanks for the pointer! Bri

I have trawled the net, found engines in various states of repair and disrepair, some are just blocks to be re-machined and built up, some complete but stripped. Prices usually range from £280 upwards even from non-runners, where I do know this engine ran really well allbeit the water pressurisation problem on the water jacket. As I said if you make me an offer at the end of next week I will contact whoever is most serious about this as a project. Also I am just really keen on gaining some space where the thing is sitting at the moment.

Well I have no idea what they usually change hands for, but please by all means do make me an offer if your looking for a rebuild project?

I have an engine thats just come out of my Japanese import Supra, its done 170,000kms though it does have a blown head gasket & was pressuring the water system before removal, though besides that it ran sweet, the block and head have not been seperated. The whole unit is just sitting there ready for someone who needs a donor engine to start a high-power rebuild. The coil packs, inlet manifold and fuel rail are all there, sorry I dont have any pictures, though I think that we all know what the basic 2JZ GTE block looks like. So if your keen and looking for a future project engine to begin and need the basics of an engine then by all means drop me a line. Regards Brian

I need the thin metal catch tray section with the bolt hole in it, as on mine the threads gone and is constantly dripping oil..... Getting an oil change soon so will change it then. Cheers, do you have one and how much for it? Bri

Hi Im after a Jap-spec front cat pipe for a twin turbo Supra, and a sump for the same car. Any usable condition will suffice, as I got the car without one & for MOT purposes, i need one prior to mid-January! If anyone has one of these off a previously damaged vehicle, by all means do PM me and we can see about couriering it over to me for fitting. Big thanks all Bri

contact a member called Ibrar, who runs http://www.suprabits.com he has a shell to be sold if it hasnt gone already. Do you know where I could source a new or used sump? Catch ya soon Bri

Hi Im looking for the horn wire, as the car I got had a HKS wheel on it and need a HKS horn boss, then need to locate the horn wire to connect it? Bri xxx

I have a similar problem, have just acquired a Supe and need to locate the wires for the horn, but the previous owner fitted a HKS steering wheel and forgot to leave me a horn boss. So I either source a Supra wheel or a HKS horn boss. But still going through the spaggetti looking for the horn wires!!! Anyone know of a HKS horn??? Brianwe

Hey A Big Thanx to All for the greetings to the club! (Sorry, Now our Club!) Latest News.......... Got one!! 93 L reg, Twin Turbo, Auto, Bright Grey/Silver. Done 166000kms, but its my first Supe and yeah, glad now I got the Auto, as my hands do seem to get stuck to the wheel at around 3800-4000rpms. It needs some tarting up, Duraglit, Polishing etc, but hey, she runs well, bought it last night & I haven't been able to remove a strange, manic looking grin off my face all day at work!!!! So whats all that about? But Blooming Fun though! So need some tyres soon, a rear boot install and the Missus is getting me an Isotta Steering wheel soon!!! Bless her! Brianwe

Yeah, I am 17½ stone and an Aquarian..........Spookie! Brianwe:d

Hi there all, I just wanted to say thanx to you all now I have joined, but to make it official I do need the particular wheels. I will be browsing the classifieds on here for "Supra's for sale", I was ideally looking for a 6 speed, Twin turbo, but dont have enough green to stretch that far............. So, I am now looking for a auto twin turbo in the midlands or was looking at the cost of an upgrade of n/a to turbo kit, any pointers anybody? By all means do let me know if this is financially viable or should I just keep checking the posts for the auto twin setup that might just take my fancy? Anyway enough of my babbling, you all get to work and buy more fuel, all and rubber! Cheers Brianwe:p