Jump to content
The mkiv Supra Owners Club

kylestt

Club Members
  • Posts

    485
  • Joined

Everything posted by kylestt

  1. Whats so special about this? haha looks great Jay!!! Pictures of install are a must as well!
  2. hehe thanks guys! I shut down just before the top of the hill just to be safe. He put about 2 bus lengths on me leaving the line and i was within a car topping the hill. I was pulling hard!!! I'm putting a 100 shot of nitrous and a .96AR housing on the car right now for a rematch with a C6 Z06 vette making 850whp hehe!! Should be a hell of a ride if it holds!
  3. I finally took my Supra out on the streets the other night. Ran across a 2008 C6 z06 built to the hill and a 1200cc bike. I only got video of the bike, a bit of poor quality but you can see i hauled ass We race just shy of a full 1/4 from a stop: The car was in kill mode, estimated ~700whp at 35psi CCW Drag Package 67dbb making 35psi on race gas hks 264 cams 780cc fuel system and other stuff
  4. Cheers, lets get this in a box and over onto a car with the quickness!!!
  5. Yes, i love you a ton after this week Jamie!!! lol ;-). Thanks a ton mate! Hopefully I'll have everything by early next week.
  6. I have a RPS lightflywheel in stock. Brand NEW, but it has been opened. Never instsalled!! 289GBP delivered
  7. Need these gone, got some other wheels in route. I'm open to offers, but no low balls please
  8. You may want to research on wastegate placement. Boost creep is going to be your biggest enemy as the angle/length...etc can play havoc on boost issues.
  9. oh well, guy never sent me a PM back. I pm'd him right away offering the cash and covering shipping. Would be nice to get a response saying it was sold :/
  10. I dont know of anything thats 60mm either. FJO, AEM, Innovate are all 52mm
  11. bump again, hot wheels at a hot price
  12. sure shane, no low ball but offer yes ;-)
  13. I'd like to stick around for a few days as a kit or if i get interest in the other 2 parts. But if it came down to it: Innovate LM-1 Kit w/ Sensor 150 Innovate Red DB 52mm Gauge 40 Innovate AuxBox input/output kit 110
  14. I sent a PM a bit ago as well, maybe its what I need to go 9s in the 1/4 hehe
  15. I have this setup from Innovate I planned to install in my car but I have just let it collect dust. Its open box so its gotta go! Its got all the good stuff like the LM-1 proven kit, the auxbox that allows you to monitor tons of the cars parameters and plot against rpm for tuning and then the 52mm gauge so you can watch it when your not tuning on the laptop. Includes Innovate LM-1 Kit w/ Sensor Innovate Red DB 52mm Gauge Innovate AuxBox input/output kit Price for it all: 300GBP delivered The AuxBox attaches to the auxiliary input of the LM-1 and allows a user to log and analyze 5 critical engine metrics in addition to the air/fuel ratio native on the LM-1. The AuxBox makes the LM-1 into a complete tuning kit, allowing the user to capture, view, and analyze data on all 6 channels that the LM-1 can log internally. Correlating AFR, RPM, MAP, and CHT, for example, is essential when tuning piggy-back fuel controllers, ECU programmers, aftermarket ECUs, or racing carburetors. The 5 internal sensors are intended for capturing Manifold Air Pressure (MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature (EGT), RPM conversion (from a tach signal or inductive clamp), Acceleration, and Injector Duty Cycle (or Dwell). The internal MAP sensor is a 3-bar absolute pressure sensor, providing accurate data up to 44.1 PSIA. The temperature measurement circuit features a K-type thermocouple. The internal accelerometer features 2 axis measurements for a variety of mounting options. Another key application of the AuxBox is road testing. Even a dyno doesn’t provide as much real data as road testing. Factors like air flow, side force, and load vary significantly on a real road. With an AuxBox, a user can log 6 channels, in multiple sessions, for up to 44 minutes. Then, back at the garage, simply connect the LM-1 to you PC and view all of you log data. Use LogWorks to view fuel mapping, perform statistical analysis, overlay graphs, and playback a log on the virtual gauges. You can also view realtime data on LogWorks’ gauges if you want to take your laptop on the road. The AuxBox also includes 5 external inputs for connecting external sensors in lieu of the internal sensors. This allows users to log data from external sensors like TPS or suspension data. The AuxBox ships with mounting hardware, the LM-1 connecting cable, and the user manual.
  16. I have an opened box RPS Light Flywheel. Brand new, just opened and not in the original box. 280GBP delivered
  17. PM sent Mike! Can't do this Saturday but we can have it to you fast of course. And innovate is frustrating me on this lm2 stuff . i'm deeply sorry about the delay on that.
  18. Bump we go, someone needs them!!!
  19. Happy Birthday, i owe you a PM
  20. bump, they are soooo cool you should buy them
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.