jonny mac

bonnet reduced £150

diff and shafts provisionally sold rear hubs pair £140 delivered anywhere in the uk rear subframe £200 delivered anywhere in the uk

they are now in the bodyshop having a clear coat of UV protection lacquer painted onto them went to toyota and got a full set of pins, springs and washers for the rear shoes to try have some sort of handbrake assembly that'll work to hold the car still 59 by Jonny McIntosh, on Flickr as per usual with toyota, they nailed me for these, some parts are stupidly expensive 60 by Jonny McIntosh, on Flickr bought copper nickel brake pipe, it'll hopefully not turn green the same as normal copper pipe, it's getting painted silver anyway, so i made a start at lines for the rear 61 by Jonny McIntosh, on Flickr bought a front tow mounting point need to find another one for sale 62 by Jonny McIntosh, on Flickr spun the shell around so i can get the doors open on the ramp now to make life easier 63 by Jonny McIntosh, on Flickr spent HOURS pealing off all this cheap ebay spec sound deadening that was clarted all over the place inside the car, probably more of a fire hazard than anything... 64 by Jonny McIntosh, on Flickr filled a carrier bag, it was all up the inside of the bulkhead etc 65 by Jonny McIntosh, on Flickr tried on the back end, used the prefacelift lights i kept from my first red supra 66 by Jonny McIntosh, on Flickr gloss black on the rad pannel and matt black quick dry enamel on the floor, rear frame and wheels are coming back off to paint all the stone chipped parts with this as a final sealant coat on top 67 by Jonny McIntosh, on Flickr 68 by Jonny McIntosh, on Flickr 69 by Jonny McIntosh, on Flickr needs some welding on the lower pockets, going to make sure i only cut up to the line so it'll all look factory finished when it's repaired notice to all supra owners, check beneath your spats if they've been on since day one! 70 by Jonny McIntosh, on Flickr after a good buff, not bad really it'll easily cut out and repair i thought it was going to be alot worse 71 by Jonny McIntosh, on Flickr inner pannel was pitted too so i got the grinder out, i don't want any rust left on this shell when i'm done! 72 by Jonny McIntosh, on Flickr this will be going in soon, 6 speed tunnel 73 by Jonny McIntosh, on Flickr PARTS LIST WANTED: clutch pedal aero skirts pair of mirrors power folding ideally

bought a new brake pipe joiner from toyota for the rear, also painted it to prevent rusting 47 by Jonny McIntosh, on Flickr 48 by Jonny McIntosh, on Flickr i've recut almost every thread on this car's body where i've painted/stone chipped as i don't want any issues further down the line 49 by Jonny McIntosh, on Flickr got the rear end fitted just for rolling the car around, it'll be coming back off for a final enamel coat going on the body for more underneath protection 50 by Jonny McIntosh, on Flickr 51 by Jonny McIntosh, on Flickr on the front i'd gotten two bungs that go above the subframes as they were missing 52 by Jonny McIntosh, on Flickr front end in place 53 by Jonny McIntosh, on Flickr another visit to the scrap yard to collect the last of my bits i'd bought off the car, my little fiesta was PACKED! got myself almost a full interior, loom and a few other parts 54 by Jonny McIntosh, on Flickr had a rear bash bar from a fresh import i broke a few years back, painted it and put it on 55 by Jonny McIntosh, on Flickr bought a spoiler 56 by Jonny McIntosh, on Flickr bought a pair of headlights and cleaned them up properly also put on a front crash bar 57 by Jonny McIntosh, on Flickr 58 by Jonny McIntosh, on Flickr

picture with my TT converted manual black car before it was sold https://jza80.mkivsupra.net/imports/2018/09/332.jpg43 by Jonny McIntosh, on Flickr brand new bumper from toyota arrived, https://jza80.mkivsupra.net/imports/2018/09/333.jpg44 by Jonny McIntosh, on Flickr fuel tank was cleaned up and had the breather pipe to filler neck painted to keep it from rusting, got a spare one for sale now if anybody needs https://jza80.mkivsupra.net/imports/2018/09/335.jpg46 by Jonny McIntosh, on Flickr bought a stock bonnet so that is currently in transport from london, shipping is more than the bonnet

rear antenna hole was filled, along with the rear wiper and old spoiler holes on the boot as he had some aftermarket thing on https://jza80.mkivsupra.net/imports/2018/09/319.jpg30 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/320.jpg31 by Jonny McIntosh, on Flickr seam sealed joins front and rear https://jza80.mkivsupra.net/imports/2018/09/321.jpg32 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/322.jpg33 by Jonny McIntosh, on Flickr then gravitex stone gaurd https://jza80.mkivsupra.net/imports/2018/09/323.jpg34 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/324.jpg35 by Jonny McIntosh, on Flickr finish is so nice on this stuff https://jza80.mkivsupra.net/imports/2018/09/325.jpg36 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/326.jpg37 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/327.jpg38 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/328.jpg39 by Jonny McIntosh, on Flickr i have only sealed up the front wheel arches, boot floor above fuel tank and floor above rear subframe, still to do the vehicle floor pan and sills keeping the frame for shifting all the subframes and stuff around, it's awesome https://jza80.mkivsupra.net/imports/2018/09/329.jpg40 by Jonny McIntosh, on Flickr so this is how i recieved the odometer, in a carrier bag mixed in with parts from an altezza he also stripped completely put it all together and it works, tried it on another supra and i now have an actual shell mileage https://jza80.mkivsupra.net/imports/2018/09/330.jpg41 by Jonny McIntosh, on Flickr this is how i recieved the mirrors, in a carrier bag, perfect jdm folding mirrors stripped, plugs cut off, paitned cases sanded back, ruined https://jza80.mkivsupra.net/imports/2018/09/331.jpg42 by Jonny McIntosh, on Flickr it's a shame really as they were perfectly working before, probably just easier to buy second hand set

then the fun starts.....finding out what i've gotten myself into rusty hole (likely from brake fluid spilling and taking the paint off) https://jza80.mkivsupra.net/imports/2018/09/306.jpg17 by Jonny McIntosh, on Flickr rusty hole, poor undersealing conditions, not properly cleaning metal and painting over rust is 100x worse than just leaving it open to elements https://jza80.mkivsupra.net/imports/2018/09/307.jpg18 by Jonny McIntosh, on Flickr rusty hole - sill above front wing, also some lovely flattned sill lips that need repaired https://jza80.mkivsupra.net/imports/2018/09/308.jpg19 by Jonny McIntosh, on Flickr after spending days and days with a grinder i'd finally gotten rid of all the old underseal and crap off the rear of the car https://jza80.mkivsupra.net/imports/2018/09/313.jpg24 by Jonny McIntosh, on Flickr same on the front arches https://jza80.mkivsupra.net/imports/2018/09/314.jpg25 by Jonny McIntosh, on Flickr and the radiator pannel https://jza80.mkivsupra.net/imports/2018/09/315.jpg26 by Jonny McIntosh, on Flickr both wheel arches had small pieces cut out and remade to look as factory as possible https://jza80.mkivsupra.net/imports/2018/09/316.jpg27 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/317.jpg28 by Jonny McIntosh, on Flickr red oxide paint was used on all buffed areas to add protection https://jza80.mkivsupra.net/imports/2018/09/318.jpg29 by Jonny McIntosh, on Flickr

hello again everyone, shell purchased to build a new supra after selling my last pair of GE n/a it was a TT auto from the factory, previous owner broke the car for parts after the engine failed this was JUNE 2017, also can see my red supra in the back https://jza80.mkivsupra.net/imports/2018/09/290.jpg1 by Jonny McIntosh, on Flickr I went back in 2018 and found the car lying like this.... https://jza80.mkivsupra.net/imports/2018/09/292.jpg3 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/293.jpg4 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/294.jpg5 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/295.jpg6 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/296.jpg7 by Jonny McIntosh, on Flickr no subframe, fuel tank, dash, heater box, steering column, front end, exhaust....it is completely bare wing mirrors were in 100 bits in a carrier bag, speedometer was in a million bits, headlights split open and in bits, parts missing and so on i made an offer and it was accepted, my black supra tt manual at the time in his driveway https://jza80.mkivsupra.net/imports/2018/09/297.jpg8 by Jonny McIntosh, on Flickr the sate of this.... https://jza80.mkivsupra.net/imports/2018/09/298.jpg9 by Jonny McIntosh, on Flickr i heard word of a local supra being broken, so i basically bought the whole car https://jza80.mkivsupra.net/imports/2018/09/300.jpg11 by Jonny McIntosh, on Flickr made a purchase, pretty much bought everything that was usable https://jza80.mkivsupra.net/imports/2018/09/301.jpg12 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/302.jpg13 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/303.jpg14 by Jonny McIntosh, on Flickr complete front and back subframes with a 2jzge and auto box ontop, all interior, loom etc etc these are only temp parts to roll the car around on and make it mobile again got the car collected and moved over to my work https://jza80.mkivsupra.net/imports/2018/09/304.jpg15 by Jonny McIntosh, on Flickr https://jza80.mkivsupra.net/imports/2018/09/305.jpg16 by Jonny McIntosh, on Flickr

price adjusted

Item:- mkiv tt rear subframe, diff, shafts, hubs Condition/Mileage:- 138km's Price:- £350 Postage:- collection preffered in Aberdeen due to size but can pallet for buyer From my new shell. Just picked these up from the previous owner of my shell as they were removed from my car prior to collection. He tried stripping everything apart to powdercoat etc. Condition unknown but car was driving fine on the road before the engine rattled. Diff: A02A according to chassis plate Tt supra rear subframe Both rear hubs and bearings Drifeshafts need new boots I think he's cut the abs sensor wiring looms on removal I know nothing else of this stuff. I literally got it with my shell so selling it on. diff has some bolts missing and the output flange has a crack in it from I'm assuming hammering off a stuck driveshaft Pictures:-

any idea where the supra badge came from in the middle?

hey I am after a whole unit I had bought one but on arrival it looks like it's been painted and warped the lower casing slightly in the heat so it doesn't sit flush to the door

hi, does anyone have a passenger side mirror they could sell me?

if it doesn't sell let me know and i'll take it please

Absolutely. Drop me a pm with delivery post code and I'll get a quote

are these the same seats as a focus rs mk1 as standard?

bump taking offers on things also for sale Na autobox complete £100

yep i bought the guys car and I'm selling the number off it and the parts to try get some money back in the door, it needs ALOT of new parts and money spent on it so this will just help me along the way with the project

Item:- mkiv supra front end Condition/Mileage:- unknown, these supplied with a car I bought, I haven't had these parts on the road etc Price:- £280 Postage:- can package at buyers expense using a courier via interparcel or something like tnt Collection From:- Aberdeen scotland so I bought a shell, it came with some parts, I don't want to use them as I have my own bits I don't know any of the history of the bits and I don't think i'll ever need them you get the following: mkiv metal front subframe mkiv front alloy subframe (engine sits on this) mkiv 2x front lower arms Pictures:- DOES NOT COME WITH TOP ARMS AND HUBS previous owner tried removing a lower bolt also got this bonnet for sale, has had vents cut into it, I believe it's an oem alloy bonnet just that has been vented needs painted and mesh added in MKIV VENTED BONNET £200 previously looked like this: PRIVATE REG FOR SALE: K33 POW £450

spoiler found.

£515

hi guys, took on a new supra shell so I'm after some parts: IDEALLY IN BLACK! if not it's ok pair of folding mirrors stock spoiler aero side skirts or a pair of pods for the rear front lip aftermarket ideally aftermarket radiator rhd manual surround clutch pedal and cylinder if cheap enough possibly engine bay wiring loom possibly dash loom

bumper found, ended up buying new from toyota looking for an oem mkiv bonnet

any front mkiv supra bumpers for sale? also any bonnets for sale? I've got a set pending in Manchester but seller won't post which is understandable, just checking there are any else out there before I hire a van and spend a weekend driving haha

SRD power steering pump feed adaptor. 90' fitting that attach's to pump to clear inlet/throttle bodies. £15 posted to mainland uk i'll take that dude I've got a GE pump I need to swap over to a turbo engine, would you be able to drop it off sometime if you're passing my work?