Jellybean

Quick Q , will I need to redo the alignment after I change the sway bars?

Whats the difference between this and the HKS Kit? Any deals with Kit and Syvecs fitted too? Drive in drive out package?

Taking the VQ35 as an example , how does quad cam engine work? I presume they have twice the amount of valves as a twin cam , but it is a conventional Piston Engine , I am confused at what point on the crank stroke would it merit to have an additional cam? Or do both cams run in tandem and its just a means to get more fuel in there? I suppose Valves can only be so big

I will be in MAKUHARI M25 with the Irish guys Will pop over

Anybody know the Hi-Story Models , only TRD3000GT model I can find http://www.amiami.jp/top/detail/detail?gcode=TOY-000960

Just plug her up and let the gases build up , takes a few seconds , does not matter if it is cold start up If you have any leaks you will see the exhaust gases leaking out, Gasket area's are normally the culprit

I Used Gates Racing http://www.ebay.co.uk/itm/330803508813?_trksid=p2060778.m1438.l2649&var=540090527961&ssPageName=STRK%3AMEBIDX%3AIT

Cool thanks , will take her off Theres no rust on her, its just grubby ; seen one of them done in painted recently and it looked good

Are they a PITA to get off? Do you need a ramp? Rear bumper off?

Thanks, I think I seen somebody do it off the car recently ; just cant find the thread

http://www.villagetoyotaparts.com/images/parts/toyota/fullsize/MBX551C.jpg Would it be ok to paint the underside of the Petrol tank Liner/Cover in situ on the car? in Black Stone Chip Part 77641A

Between now and March 14th , car is in the Garage at the moment

Thanks I was looking for that but the site did not have any Tech articles on there, looked like they were deleted - - - Updated - - - Between now and March 14th , car is in the Garage at the moment

Anybody have the OEM settings?

They can replace the lips on the wheels with new ones http://www.jdmdistro.com/news/weds-kranze-rebuild/

I got quoted this here To rebore block,machine hone & deck block incl gapping ring’s & fit ring’s to piston’s budget about 450.00 euro. It’s hard to price the head really as we don’t normally replace the guides unless they are really worn. But budget about 650.00-700.00 euro to cnc cut valve seat’s & throat’s,machine finish & fit your seal’s & spring’s. Allow another 100.00 euro for to set valve clearances.I would have to inspect it to see if it need’s guides.

You can get them off Probolt but they are $$$ http://www.competitionfasteners.com/titanium-fanged-race-bolts-drilled-42-c.asp

Just got my race drilled titanium bolts, they do look stunning , M6 seems very small for the head lamp and slam panel ; Car is in the garage getting the suspension done so cant check

Cool thanks , so roughly a days work Just want to figure out the budget to get them fitted

Anybody know of a rough budget to get Cams fitted and degreed with a DTI? Cannot get a quote off any of the garages in Ireland or Northern Ireland

Thanks Dude, yeah its Ireland ; its all the drift scene guys How they work, unless your parts are bolted to the car people think they can take and choose what they want

I have a RZ TT 93 model so it has the big case diff, 12 bolt 220mm pinon and ring gear Something went in it , I think it was a bearing ; I gave it to my mechanic, Mechanic X to overhaul will all new OEM parts; I got a message today on FB from another mechanic, mechanic Y saying they did my diff and it is sitting in there's , Mechanic X says its not my diff they have it , Mechanic Y said Mechanic X told them to rebuild a big case diff and they are looking for there money, Mechanic X wont answer there phone It would give an Aspirin a headache My question is , Can I verify the Diff against the vin on my car, any marking on the diff casing I can use to validate matching numbers

Dont forget to say you will bring Biscuits! It always sweetens the price

Thanks Chris , I might take you up on that! I will email you the part numbers and prices to get a price comparison, going single I would rather do it all at once, just forget about it then ; she is 22 years old