Jellybean

Lack of room I reckon, looks very narrow chassis May weight distribution too, radiator most likely in the rear

Its a big turbo , a 2jz, a swirl pot , tial waste gate, a crazy intake setup and what looks like GM coil packs and a drag car chassis I am going to put my neck out and say it looks like a compound setup

Twin fuel rail setup

Anybody have drive by wire setup on the Supra?

Is there an option to purchase a new loom like the fully terminated loom you can get with the Haltech?

Dont have any

Thanks Guys, Will post up a pic of mine when I have it done

Have a good idea what I want to do thanks Just have to see how it all lines up with the TRD ducting

Nicely done sir

Hey the bearing is gone, what are my options, new Toyota bearing or a one piece propshaft? Are these common items to go? When replacing do I just do the center bearing or the NUT, PROPELLER SHAFT ADJUSTING / BOOT, SLIDING SHAFT too?

Anybody any tips or tricks for removing the Carrier hub bush while the hub is in situ We made up a press and used the snap-on torque drill but the little bugger wont budge 48725 bush

Good shout, could use it to clean the engine bay too

Have alot of grime and dirt from 22 years of driving , its on the Aircon rad Any good products to clean the fins? I tried some Engine cleaner and a soft brush but you are really only cleaning the surface not all the way through the fins

Sorry last Q, can you wirelock those goodridge AN fittings?

Thanks will try run it right or left

Anybody have any pics of an oil cooler installed in the side passenger pod area and the AN fittings on the top, I think it may be a tight squeeze with the TRD bumper ducting Mine is like this at the moment, was thinking of running two brackets from the sump/engine tray area up to it ; any advice or idea's welcome

Any pics for Supra oil cooler installs

Is this kit just external wastegate or do you have the option for recirculating? Any plans for a turboless kit? Will you be getting the manifolds with the Billet collector?

Thats what I am thinking of getting this winter when I pull the engine, be a nice contrast to the Black of the engine bay and Zirotec black coating

Awesome https://scontent-lhr.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10376991_383097415211261_9212771988101660453_n.jpg?oh=5bb9afc9e856078928800b6268e27124&oe=55E16B54 https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/18182_383097411877928_9088965956541736691_n.jpg?oh=311ed38e70b132084d7617d6c314938f&oe=55DD1D88&__gda__=1436400687_d2454b41663fb576b69d68496fd7dc7e https://scontent-lhr.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/11193437_383097421877927_4664575185562161147_n.jpg?oh=295b952861ebbed8a3a1e642212854b2&oe=55D883EF

Thanks, Just dont want to do anything stupid

Whats thhe best way to clean the sparkplug well? Was thinking brake cleaner and air hose? leave th spark plugs in situ, remove coil packs and loom

TRD Bumper install So had a go at fitting the tray last night , it will not need to be modded but the front bumper will have to come off; where it bolts to up under the oil pump area , there are no threads on the holes to thread the nut through so I will need to use a nut to fasten it , even if the holes where threaded , it is too tight to get your hands in there. to even use a self taping screw or cable tie With the TRD bumper , if you have the oil filter in the OEM location off the side of the block, you will need to remove it come oil change time I did put some rice in there so hopefully during the nite some Asian person will come along and fix it for me

http://www.mkivsupra.net/vbb/content.php?57-Brake-System

Stunning