Jellybean

Hi Setting up Thresholds for Alarms , I want to measure the below Engine Temp (Celsius) Oil Temp (Celsius) Fuel Pressure (PSI) Oil Pressure (PSI) Engine/Oil Temp -- Cold under X Degree Celsius Just about up to temp At Temp threshold (Between X temp and Temp) Getting hot (Between X Temp and X temp) In the Red Fuel Pressure -- at what pressure and above is WOT Oil Pressure -- Good, Bad , and the Ugly thanks

If it is a TT Jspec , it is a Cat Temp Sensor on 1st cat; normally when you decat you just tie it up out of the way

Attempt at TRD Tacho Replication OEM Unit http://www.supraturbo.com/trd-tach136.JPG Digital Rendering

thanks Wez

Yes it should, also works with ODBII

They are PNP no need to drill holes The two brackets with hood written on them bolt to the hood via the OEM mounting hardware and the smaller ball units thread into the wing via OEM threaded mounting points

Thanks Chris, only problem is the LTC (Wideband controller) takes up my only CAN bus port, I am not 100% sure if I would have to choose to run the LTC or C125 Dash Display due to lack of can bus ports, currently a question I put forward to Motec; I would presume at the very least you can run a Dash display and Wideband on the M130 M130 has 120MB , cannot imagine I would need any more for a road car ; plus the C125 display has an additional 120MB if you needed it

Pretty much a replica LOL I was look through all the OEM offerings , these guys would have $$$ budgets for UX design , out of all the exotics I saw , the LFA still stuck in my mind You can make the display go red at X RPM for example , once you set the condition you can make it do anything

Yeah got an M130, the dash displays are a bit too $$$ , maybe in the future ; would like to get up to speed on the software first though

Messing around with Motec software , you can do some cool stuff with the Dash displays Animations for warnings , Lap timers linked into GPS , will try replicate a digital TRD Tachometer next!

Yes 65mm and 65-75 MM in length, blue silicon

Thanks Jim , I am not too up on this media box stuff either Just pulled the trigger on a Bestland MXQ PRO , at 36 euro looks like good value From what I gather , Showbox app streams high quality media only as opposed to Kodi , will steam anything regardless of quality Showbox can be installed and streamed via PC/Macbook using an android API but for pure laziness , you can get an android box just PNP to you TV , the basic functionality is similar to your Sky box, pre installed interface , have what looks like a TV remote to navigate and select what you want. Some of the apps on there have a similar interface to netflix, fairly idiot proof and saves me booting up,plugging in PCs to TV and no remote For 36 euro worth a punt , talking to the guys in work, 1GB of ram(memory) is enough https://www.amazon.co.uk/gp/product/B01AN5HCX4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Anybody recommend one, can you play show box via a PC or Macbook? Can you install it on an Iphone 5s without Jailbreak Will it support Chromecast? Popcorn time is hit N miss lately

I would not of taught the rigidity would be affected too badly , what really put me off is the lack of good weather here I would put up with the body roll what I'd imagine is a fantastic sound through a tunnel , especially with a single on there

Another option is an OEM rad from an Auto , it has an additional cooler built into the rad for the auto transmission which could be used for a very neat oil cooler setup

Thanks Frank! Always loved the Aero

Love the Carbon roof, bit of a newbie Q; always taught all Aeros are NA from factory?

I am running the Walbro in the Supra over 7 years , no issues ;I dont have any experience of the AEM, most likely a re-branded unit Over the years the general consensus is Walbro or Bosch, the bosch is a little nosier

Its not very clear, hard to tell - - - Updated - - - Did a search on Ebay and google for Toyota loom clips ,and loom clips in general, nothing looks similar

If anybody has one, Greddy 65mm/70mm Intercooler hose

Maybe you have to purchase the 90929-01283 to get the clips

That's the metal bracket that screws into coil pack bracket , I need the clips that press into that That part number is a bit pricey to be plastic, hmmmm

Hey Is this the part number for the clips on the coil pack bracket that holds the loom in place? Grey in color, have a 7 on them (NOT Coli pack clips) They break with age and Heat 93319-15008 http://www.toyodiy.com/parts/p_J_199305_TOYOTA_SUPRA_JZA80-ALFQZ_1901.html thanks

What is the general consensus ? Will A yes vote in favor of an exit be the most likely outcome? I was not following it too closely , think the vote is in may/June?

I found this a useful video