Jellybean

I am still on the Xbox 360 playing COD MW2 , never found a game yet to compete against it online ; was waiting for a remastered version to get the new console , might take the plunge I tried Battle Field as much as I would like to love it , the game play is not the same , I find it very frustrating, always getting killed; even after loading a clip into somebody , they turn around and kill me with one shot Then the buttons, I dont know why but I have a habit of pressing the thumb button and just end up with a knife versus a gun or hitting the deck versus shooting ; I tried to change button combinations but no use

It doesnt have to detect Neutral, once remote start is armed the car remains running until you turn on the alarm , then it shuts off the engine , unless you sat in the car with the car in gear , foot on the clutch until you turned on the alarm for the engine to shut off, inevidable will result in the alarm triggering , disabling the remote start , it is safe

I Checked with Bob in Loctite , Loctite 545 is essentially a higher viscosity (thicker) version of Loctite 542.

Thanks!

I will dont worry I was also talking to John this morning who built the firmware , he said he will incorporate any additions I need to run the car in sequential for next revision

Sorry , saw 452 when you said 545 LOL I must be dyslexic I cannot find 545 or 5452 on their website hmmmm I think some items on that site are renamed

What do recommend Chris , it is a Fuel line I want to fit an AN6 return Fuel line to m14X1.5, I do not use the O Ring , The Regulator return Feed is cast m14X1.5 I have a m14X1.5 Adapter to AN6 The issue is the seal , 452 is holding up good ; they also do 577 for more coarse threads or PTFE Tape? http://www.henkel-adhesives.co.uk/loctite-577-pipe-sealant-10315.htm I did ask the guys I bought it off, Bosch, Goodridge

He made a mistake and configured it wrong , it is not that hard to select the incorrect item in the drop down sub menu , I do not have an issue with his ability just his attitude; he takes on too much and appears to rush things , make mistakes , men are not good at multitasking He is supposedly very good at TC setup , I am spending all day Monday with him setting up Sequential operation / Traction control , just want to do it once and do done right If I can get the full day out of him calibrating the car , we should be in a good place by the end

Thanks! Makes sense

That is why I am asking Instead of installing additional G sensors , take a reading off the OEM

So it is not common to use the OEM sensor?

Hi I just remembered the Supra has a G Sensor from Factory , Setting up the Motec Traction control I was thinking of installing a G sensor from an EVO, determine the angle the car is at in relation to slippage Do we have any information on the Supra G Sensor , I have the RZ model so the Linear version was Standard from what I have read Where is it located , I presume you can hook into it via the ABS ECU

I have low expectations for the New Supra , where's the air management of the FT1 , stunning Wing mirrors, rear active spoiler with twin Aluminum pneumatic Struts! As Toyota is not considered a premium brand in comparison to BMW , they will be out stage by the Z5 ; Lexus will be the comparison model I can see it looking like the Hyundai Coupe , performance wise , 400hp is mediocre in today's market for a flag ship performance car ; based on today's engineering , European engines/ drive train is rarely over engineered If they do have a 4wd model , it has to compete against the GTR

I have HID's too , they do not exactly seal as opposed to an OEM bulb but I never had any issues with condensation until the vent with the rubber unit / sponge inside fell off , I put it back in situ , no issues Must of fell off when I was messing with the bulbs , was sitting between the headlight and airbox

Very Nice! What Black look counter sunk fasteners are you using for the Wings and slam panel

Pete posted the link to download the PDF

Might explain why they are having issues today

Got my car aligned again today , my fronts are set to the max to get her in the green ; anybody else have to do this? TRD Bilsteins Wheels have 25mm Spacers all round Wheels Volk^Racing^GT-C^Face 2 Wheels Size:5X114.3 19X10.5J ET+37 (REAR) Volk^Racing^GT-C^Face 2 Wheels Size:5X114.3 19X9.5J ET+24 (FRONT) +37 - 25 = 12 +24 -25 = -1

LOCTITE 542 Thread Sealant - medium strength. For fine threads in hydraulic, pneumatic and general fittings. Fast curing. LOCTITE 542 is designed for the locking and sealing of metal pipes and fittings as well as other cylindrical metal assemblies. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. The thixotropic nature of LOCTITE 542 reduces the migration of liquid product after application to the part. Your benefits Ideal for fine threads as used in hydraulic, pneumatic & general fittings Suitable for metal threads only Instant low-pressure seal Resistant to fuel, oil, coolants and hydraulic fluids Locks connection against vibration loosening DVGW approval (EN 751-1): NG-5146AR0855

That gave me a chuckle, Loctite do other products not just superglue and yes , do not put superglue in your fuel fittings lol [emoji23]

Return fitting

Hi Just want to double check , I have an Bosch fuel regulator , it has a cast return non seated m14X1.5 , I have a brass m14 fitting with a 1/8 NTP port for the fuel pressure sensor and m14 to AN6 for the return I am using loctite 542 to create the seal Is this the safe to do , I read fuel will degrade PTFE tape , as it is fuel I want to be safe Loctite 542 Ideal for fine threads as used in hydraulic, pneumatic & general fittings Suitable for metal threads only Instant low-pressure seal Resistant to fuel, oil, coolants and hydraulic fluids Locks connection against vibration loosening DVGW approval (EN 751-1): NG-5146AR0855 http://www.loctite.co.uk/loctite-4087.htm?nodeid=8802627026945

Thanks! Sounds promising , just hope the styling is like the FT1

I did not see Jim posted , I am more concerned that the guy is ok Mods please delete thread