Jellybean

I had a look into this http://www.nitron.co.uk/pwpcontrol.php?pwpID=17741 RECOMMENDED SERVICE INTERVALS The frequency of a recommended service varies according to the individual schedule received with the shock, however the recommended servicing schedules are detailed below. For arduous Race use, the service time frames are dependent on application. Automotive Race Use - Annually/Off-Season Road/Track - 20,000 – 30,000 km / 12,000 – 18,000 miles

Jelly (You're my boy Blue)

I priced up an LFA engine 47K euro , not too bad !

Thanks Dunk! CW setup should work with mine so

I flushed the system last nite , she took roughly 1.5 liters If you have the same Tank as I have above , you need use PTFE on the return and feed reservoir fittings , thread is too coarse to create a complete seal Their new Design uses AN fittings as opposed to Fittings machined from the Canister

Had to take 15cm off the High Pressure Line , I cannot see a reason why it is as long as it was , aftermarket intake would not be a factor Main benefit is no more removing the PS reservoir to change the oil filter

Install the PHR unit today , I am a bit perplexed as to why the line is so long; RHD / LHD both retain the same PS pump / Reservoir location ; OEM Pipe is a 1/4 of the length From the PS pump it runs as far as the Oil filter them loops back to the reservoir

Sorry Dunk , keep mixing up names [emoji23] That's her , thanks That was just oe height and 30/25 MM drop Looks low , could you get two fingers between the arch and tyre? Do you remember wheel offset and size? Tyre size [emoji6]

I got the Red Top from Tanya about a year ago https://www.tayna.co.uk/Optima-Red-Top-Battery-RTS-4.2-P8903.html Get one with a handle , they are heavy , approx 20Kg Halfords are doing Yuasa Batteries now

Mr Wilson on lines http://www.mkivsupra.net/vbb/showthread.php?323435-Fuel-and-oil-lines&highlight=chris+wilson+brake+lines

Simon was that on your black TRD bodied car, I am trying to get a more road friendly setup and was hoping Chris's will work Do you have a pic of a side profile of the car with them fitted please

Did anybody fit carlock ?

I would like a titanium manifold stud / bolt set

If you have issues with blinding other drivers , light scattering , I would highly recommend Philips Racing Vision Bulbs http://www.philips.co.uk/c-p/12342RVS2/racingvision-car-headlight-bulb

I would be interested in a group buy, only reservation I have and Chris was if my car will have issues because it is none standard ; on some digging last nite , I was wondering if I could just fit some of Chris' springs over my TRD shocks as they are made by Bilstein and have circlip grooves for 3 ride heights I would like more detail about the custom valving , benefit and application (i.e. track, road ..)? Be good to make it a sticky if Chris gives us some detail ? Heres what I found last night around TRD Bilstens , be interesting how they compare to German made Bilsteins TRD Shocks Fixed rate Made by BILSTEIN http://www.trdparts.jp/english/parts_sus-set.html http://www.trdparts.jp/english/parts_shock.html http://www.trdparts.jp/english/parts_spring.html *Value in the above list shows damping force at 0.3m/s of piston speed. *Shock absorbers in the above list is gas charged type unless indicated specially. ※Rear spring does not have enough free length when installed with genuine shock absorber. Please install with TRD shock absorber. (48530-JA801×2)Lowering at approx. 15mm

Thanks Mark , will send out tomorrow morning ; will keep you updated by PM as usual

Very nice , was the Power steering pump hard to remove? any specialty tools?

Just waiting on Mark to get back to me , but will keep you posted

I was in Damien's Supra with CW setup and Titan sway bars , Supra was like a go-kart ; soaked up the bumps Setup I want to get , TRD springs are spine shattering hard

Thanks!

Great Work! Christian , my SS plated exhaust tip has gone a bit brown (tarnished) ; what do you recommend to bring it back up Wetsand and White diamond metal polish?

I installed them on the MK5 Golf , OEM bulbs are like candles , nice upgrade Testing , beam pattern against a halogen bulb so I dont Bind outer motorists

Can you PM me your address I can check shipping cost , should only be around 5 pound

Bump