Jellybean

Thanks Colin , seems like a removal is needed to get best results which equals seal replacement hmmm

It feels like fiber glass, can you not just spray them black I taught Primer is a protective sealant for metal subject to corrosion? would you need for fiber glass?

With effect from the 1st April 2010, an additional 7 items will be added to the National Car Test http://www.ncts.ie/NewInspectionItems.aspx They cannot handel the current workload, its crazy , from June any 10yr or older car is annually tested plus for any Jap imports they will be used to vet (in the same center) for extra's(leather/Sat nav/Air con)/Engine/Mods and based on this the VRT is calculated rather than currently on the open Market Value (another illegal tax the EU are trying to get abolished) So getting a Jap import will be ridicolously expensive here , Government are trying to get people to buy new cars off the car dealers here, so they can cash in on the VRT Governement are all pushing the propaganda through 'Going Green' and saving the enviroment campaigns

I asked him why I failed in the NCT center and he just replied "ask your Mechanic", absolutely wasters just no need for it It was my front reg letters where 5mm too small and on re-check they stood 10 meters away and said thats ok, I might as well just went for a coffee and came back

Was thinking of painting the under Bonnet vent covers(prevents rain on the Engine) either Enamble Chrome /Silver or matt Black( I think is best) What do you think, reckon they would look good painted or would they paint take to them? It was windy that day so put the Bonnet holdie upie thing up even though she has bonnet dampers http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29205_1119312480590_1760389825_226895_7760780_n.jpg

Is it possible to polish the Cam covers, whats the best approach without takeing them off and a DIY job Some elbow grease and Autosol or Brasso? or am I wasting my time I did serach cant find anything

Tell me about it, and it is now to be an annual rollercoaster for me , with the new rule

Was wondering who would spot it, refurbed the wiper arms the weekend ; it back to two now If you look close u will see the wiper is sanded back to the stainless steel

Thanks John but knowing your work I bet yours will fit better than OEM, you still sticking to White I say she will look stunning in White

Everybody says that ;Shes fine, no issues. I have went over many a ramp with no issues , and some of the ramps where insane I did have my resevations; radio off head out the window so far all good I think she is just a fraction 1-2mm up that helps

Thanks Gaz, sorry forgot to subscribe to the thread on there

yep ; your car was part of the examples of what I wanted when lookin for a supra

Its OEM TRD Kit alright It has the normal cloths seats because I dont have the $$ to get Bride Stradia , if you wish to sponsor me ; Carlo needs new Bride Stradia Seats for his Supra

Thanks For all the Comments !! If anybody is goin to the next event in Northern Ireland, you are more than welcome to check her out; hopefully this year I will get a Show & Shine trophy Start Time: Friday, 02 July 2010 at 18:00 End Time: Sunday, 04 July 2010 at 05:00 Location: Northern Ireland, New Castle http://profile.ak.fbcdn.net/object2/1132/107/n124528020894936_4817.jpg

thanks No, just a bit of wax and polish by me

If you see any Dirt, try wiping your Pc screen first :0 http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs111.snc4/35929_1211440986184_1833547789_424477_2982792_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs051.ash2/35929_1211441106187_1833547789_424479_2585427_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs051.ash2/35929_1211441146188_1833547789_424480_3626573_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs111.snc4/35929_1211441226190_1833547789_424482_6125909_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs091.snc4/35929_1211441266191_1833547789_424483_687354_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs051.ash2/35929_1211441306192_1833547789_424484_902047_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs111.snc4/35929_1211441186189_1833547789_424481_2816673_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212068521872_1833547789_425544_530679_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212068601874_1833547789_425545_2294418_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212068641875_1833547789_425546_3339226_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212068721877_1833547789_425548_4273563_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs120.snc4/36381_1212070041910_1833547789_425550_4298988_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212070161913_1833547789_425553_919620_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs120.snc4/36381_1212070201914_1833547789_425554_8124929_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs060.ash2/36381_1212070241915_1833547789_425555_3776040_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs060.ash2/36381_1212070401919_1833547789_425559_4194821_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212070441920_1833547789_425560_5901539_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs100.snc4/36381_1212070521922_1833547789_425561_7367484_n.jpg

It is if no foreign objects get in between the Belt and the Cams; its a risk you take not running a cover but I know of plenty people with similar setup and no issues

Hey Man I would start with Hose Techniques Kit For Toyota Supra 1993-98 Twin Turbo-- Replaces any old tired hoses and makes your engine bay bling I have a Polished Rad Panel, real bitch to keep a mirror finish(watermarks) I gave up, you would have to clean it everyday, get the APR Carbon fibre radiator cooling plate off Whifbitz; I can show u at the Supra weekend in July Rad Cap Rad Pipes, look good and also replaces the old tired ones Spark Plug cover ( I have carbon one off Whifbitz, excellent quality) Next you are talking Cam Covers, Throtle Body, Intake MVP http://www.mvpmotorsports.com/Templates/frmTemplateM7.asp?SubFolderID=482&SearchYN=N Whifbitz http://garagewhifbitz.co.uk/index.php?option=com_virtuemart&page=shop.browse&category_id=1999&Itemid=53 RB Chroming -- Brian does some nice stuff http://www.rbchroming.com http://www.supraforums.com/forum/showthread.php?p=5977716#post5977716

Lookin good John; if you find out the correct offset of the TRD body let me know, interesting to compare to what other TRD bodies are running ndwgolf member on here runs this offset Front Wheel Weds Kranze Borphes SMB 19 x 9.5 + 28 Rear Wheel Weds Kranze Borphes SMB 19 x 10.5 + 16 http://www.mkivsupra.net/vbb/vbpicgallery.php?do=view&g=1013

The Wheels from your first pic

Liken that alot Ric, Niceee More Pics

Brilliant

thats fair

Typical BMW driver, M3 driver last nite was not too happy when I passed him He had to give it the beans , cut across two lanes and slam on the brakes for a sharp bend into the shopping center

check this out , yes my reply is because I am Irish English scientists have finally developed a car that runs on water. So far though it only works with water from the Gulf of Mexico. Scottish scientists have finally developed a car that runs on water. So far though it only works with water from the Gulf of Mexico.