Jellybean

From Suprasport , Same as lhd Small panels 300 usd each big panel 500 usd out of the top of my head.

Hey Does anybody know what aux belt fits the 2jz after an AC delete with the ATI damper ?

Hi How is the turbo cooled , air? Or water I want to get a billet upper water elbow

I just did Post up in here if they get back , will do too

Thanks Mike

Will see what Richard recommends

Thanks Do you know the fitment , so I can verify with RL

Cool thanks AEM kit is a waste of money as I do not need the controller

I think I seen them resonable priced, cheaper or on par with OEM

Hi Car: 2JZGTE JDM PT 6466 Gen2 ECU: Motec M1 ECU with provisions for Water methanol **In Ireland , its near impossible to get E85 , Flexi fuel sensor is not a viable option John Reed firmware is based upon MoTeC GPR package which includes the following features: Water injection control - with failsafe for boost/timing/fuel based on pressure sensor feedback Water injection: John said he usually grabs pump and nozzle. Reservoir depends application. Then I just use a relay to let the M1 trigger the pump, and a 150psi pressure sensor in the meth line between pump and nozzle for the failsafe.PT Any recommendations on , pump , nozzle , relay and pressure sensor ? I was talking to Dave Rowe but he never got back yet with recommendations

Hi Car 2jzgte JDM with PT6466 Gen 2 I have a 25 row oil cooler but I am not keen on the Greddy inline thermostat; they are over 10 years old , time for a refresh My main objective is to retain factory oil flow, still retain the oil filter on the side of the block I need some advise on Thermostat Sandwich plate , Mocal I presume but what one? Do I need the longer oil filter housing stud ? Do I need or it is advised to remove the OE oil filter cooler? Due to clearance issues?

Arnout in Suprasport NL had them 3d printed , I think just pre-facelift so far

You can have it , think it is in the tool box in a padded envelope ; will take a look tomorrow , hope I can find it now

http://www.mkivsupra.net/vbb/showthread.php?332305-Review-OsGiken-Super-Lock-LSD&highlight=review+osgiken http://www.mkivsupra.net/vbb/showthread.php?328829-OsGiken-Spec-x&highlight=giken

I might still have a rear gold one at home , you can have it if i can find it

Just buy one 49 inch curved Monitor

Bump

Does anybody know the ID/ Length Rad hose couplers? I need to get Black

Nuts! I stand by my decision though, please proceed

An office person will do , somebody with some company branding on them preferable please Dont even say anything , just walk away like nothing happened , they know what it is about

The Car should be on the M6 Chassis I think if you are in this and Z4 pulls up beside you , you wish you did better in life and bought the z4

Gaz can you throw your shoe at someone for me please