Jellybean

thanks! Keep me posted

Hi Keron Did you get any more heater control units in?

Hey Does anybody know the part number for the white plastic clips 6-8 of them , attach the rubber to the scuttle/cowl panel too I think it is this but hard to tell from the Diagrams 90189-04218

Bump

These Quick Connects create a seal on the barb Same as used on the Flexfuel sensors or any fittings with a Barb I Just want to have an AN black (cotton type line) not necessary has to be AN fitting , just to tidy up the bay but I think I found some Flexable hose for the job , any lines I used are too rigid , I was not aware of the Flexable coolant hoses Thanks for the help

Something to be said ,none of us take the piss with your PC questions But hey , each to their own

Crossy , I tore the room apart tonight , could not find it ; Wife even gave me hassle over the mess Will keep looking , if I find it will let you know! I know it is around here somewhere

Thanks , its cool , I get some AN 4 lines

https://www.ebay.co.uk/itm/Flexible-EPDM-Wire-Reinforced-Rubber-Coolant-Water-Air-Heater-Radiator-Hose/371676223792?hash=item5689a11930:m:mVq0EvwzEoYXWVSCciDcihA https://www.ebay.co.uk/itm/Flexible-Epdm-Rubber-Radiator-Water-Coolant-Hose-Heater-Pipe-Convoluted-Rad-Tub/290674247374?epid=22012360717&hash=item43ad8906ce:m:mpcK3uOEJHghVmCtL57AxxA These have 19mm https://www.ebay.co.uk/itm/Wire-Reinforced-Rubber-Hose-Flexible-Coolant-Heater-Pipes-Castellated-EPDM/221309211293?hash=item33870e929d:m:mW-9u1Zklhc05FmF6ZzDXzA

Bijal in Future Motorsports has most of their range in stock, whifbitz and SRD too I bought some stuff directly off PHR 2 weeks back , took 3 days to arrive to Ireland

PHR do a set , but probably too $$$ https://www.powerhouseracing.com/product/6642/phr-heater-hose-kit-for-single-turbo-supra

Did anybody manage to fit a QuickConnect to the overflow barb of the Koyo Supra Rad , to allow the use of AN fittings?

I presume you run this setup on a twin gate

Just reading that now Interesting!

The age old question , what are the merits of having a 3 port over a 4 port solenoid? or vice versa?

Do you remeber what Barb fitting you got? and filter ? Size sintered air vent/muffler AND 2 x 3/16" hose barbs (AN3) Did you run an AN line like this?

Thats the problem , trying to find an authorised supplier

Thanks!

Are you running Mac boost solenoid? Not too sure where to get either

Thanks , bloody hell hes expensive 240 gbp vs 156 off Whifbitz

They seem to vary widely in price from 34 gbp to 156 gbp ; anybody any experience with the cheaper variant or recommend a place to buy Does anybody know of a place that sells GM OE parts here or in the UK Summit racing in the states is all I can think of , ebay/Amazon just throw up copies ; I want an OE part for reliability and some sort of QC

Anybody run these , looks like a nice product! With the Turbosmart Wastegate Sensor Cap you can “see” into the wastegate, so there is no need to guess anymore. You can log the wastegate valve position and know exactly what it is doing in relation to other engine operating conditions. For example, can see at X RPM, your valve lifts Y much, which results in Z boost pressure. No uncertainty, just hard data. The Turbosmart Wastegate Sensor Cap: • Is the first of its kind on the market • Allows the user to install a valve position sensor to their standard Turbosmart 'gate by only changing the cap. • Is compatible with a wide range of popular data loggers (MoTec, RacePak, AIM, etc) • Utilises a simple 0-5 Volt sensor found in many auto parts store (or available directly from Turbosmart) • Is an off the shelf item, available for all current Turbosmart wastegate sizes: 38mm, 40mm, 45mm, 50mm, and 60mm

Thanks Lee Sorry Mike just wanted to update so others will get the other belt , Thanks for the help, it is appreciated !

6pk1930 Is the correct belt

Great thanks