Jellybean

Interior 303 Aerospace Protectant Chemical Guys - Liquid Leather Conditioner & Cleaner Gliptone - GT12 Liquid Leather Cleaner Gliptone - GT11 Liquid Leather Conditioner Finish off with Autosmart berry blast air freshener Chemical Guys - Leather Scent Chemical Guys - Stripper Scent & Odour Neutraliser California Scents

Lookin good; What seat rails are you using Steve?

Engine Covers!

No way, sorry to hear that Jake! If you need anything let me know

Any more pics Jake?

Anybody?

Hey I was advised by toyota here to also replace the bearing/brushes too?

After i disconnected the battery, reconnected it this morning and nothing ; no clicks just dash lights as normal , 4th turn she fired up , out in her all day ; no issues Pulling strong , idling fine , rpm on doorway is all good i, starting her she fires up straight away Very confused , she fixed herself !

Thanks just found Dave's guide and emailed Paul for parts Disconnected the battery to clear any engine codes Will clean the icv today too

Thanks, do have any pics or information as to where the splendid is? Is the solenoud rebuild kit a Toyota part , diy job? Is it safe to drive or could it completely go anytime?

Started the car today since Sunday , she clicked again on turn over then i turned the key back to off , retired and the started I checked the battery with a multimeter , car on she is aaround 13.2v; same with the car off Question is, should i see an error code too? Or anything indicating a faulty altenator ?

Awesome! I want to do mine over the winter , Do you have to completly strip the Caliper of pistons and ancilaries to paint them? What is the name of the Bolts / E-clips that hold the Front Blue Bell housing to the Brake Rotar; I would like to get new ones ; not too sure if you need to get Project MU specific

Trip on Saturday was around 110 miles ; I did about 6-8 WOT and it was 70 miles motorway at 130/140 KM/H / 30 Miles Urban about 30-50 KM/H ; I had about 30 liters of Petrol; I used about 20-25 Liters ; she is still above the reserve which I think is ok, I think it is about 25 mpg

O2 Sensor/fuel Filter was only changed about 10-12 K ago Fuel Economy is fine I was thinking Map Sensor since the issues I had with a loose one after the track day; it was the first long run I gave the car since you helped me out Ian It was a bit strange on Thursday too, when I went to start the car she just clicked as though the battery was flat ; so I tried her again and she started! I am not a big fan of the Halfords battery I got , it is only about 8 weeks old. But first time that ever happened to me was when I actually had a flat battery. I was thinking maybe the ECU reset itself and was re-learning, not too sure ; if she did have a power cut the alarm I presume would have a hissy fit. I will bring her for a spin again and see how she fairs out. I presume an Error code will be thrown if it is an O2 Sensor?

Cool , will check them out the weekend How do you check the coilpacks are working? They are the weak point , 19 years old

Hey The Thursday I started the car, she ran fine then started to drop below Idle RPM and cut out after about 30 secs; I taught nothing of it. Saturday after a 30 min drive on the motoreway 120 km/h; I pulled up at the lights after 10 mins of urban driving, at the lights the engine started to drop below Idle RPM cut out , so I restrated. no issues. Back on the motorway the car sitting at 120 km started to splutter for 2-3 secconds ; through out the day this happened about 2-3 times on the motorway sitting at 120km I pulled into the Motorway service station, left her running ; then after 30-40 seconds she dropped below Idle RPM and cut out MAP sensor? Check if any engine codes, Idle Control Valve need cleaning ? What do you guys reckon?

Just downloading it now, i can't access bbc iplayer in Ireland Do the wheels look nice :-P

Reading the Blog 2URGSE + AA80E + ISF DIFF now fitted to the Supra

Check out the Awesome Stuff Colin and Marty are doing! (in the blog section) http://supraspecialists.com/ CAN DASH DISPLAY – For custom AA80E controller http://www.2urgse-supra.herobo.com/wp-content/uploads/2012/07/lcddashbezel.jpg Cosmetics – The rear end http://www.2urgse-supra.herobo.com/wp-content/uploads/2012/07/rear.jpg http://www.2urgse-supra.herobo.com/wp-content/uploads/2012/07/rear2.jpg Disecting the DI system just some rough notes in how we might control the DI EDU’s http://www.2urgse-supra.herobo.com/wp-content/uploads/2012/06/Di1-822x1024.jpg

Might get these guys to do mine http://www.aquaprint.ie

Didnt realise you can paint it; I presume you need to use some sort of UV resistant paint By Prep , would you sand it?

Anybody have any suggestions on bringing the Scuttle panel back to life! Mine has gone a little faded over the years , it is 19 years old!

Subscribed

Would love the engine bay cover covering the rear Firewall , master cylinders and ugly EVAP system hoses ! So much cheaper and more sensible than doing a wire tuck plus I think it looks better

Would love the engine bay cover covering the rear Firewall , master cylinders and ugly EVAP system hoses ! So much cheaper and more sensible than doing a wire tuck plus I think it looks better