Jellybean

My favourite white Supra http://www.speedhunters.com/wp-content/uploads/2008/08/672resized_MG_5518.jpg

Easy 4K euro!

Subscribed Do you do blue Sets now?

AEM Kit will do the trick! Part # AEM 30-3000 The Water Injection Kit is an economical, complete install kit with no extra parts needed, user-friendly setup solution for reducing air inlet temps and increase charge density in boosted vehicles. Allows the user to safely run higher boost pressures and suppress detonation allowing the utilization of more timing and boost. Performance will no longer be compromised when running lower octane fuels. Features a high-pressure pump with progressive controls, a 1 gallon tank with integral fluid level sensor, interchangeable nozzles for easy flow adjustment and an integrated system status dash light with easily identifiable error codes including short circuits, battery voltage problems and low fluid warning. Key Features: •Complete kit, everything is included •Progressive controller driven 150 PSI pump •1 gallon tank with integral fluid level sensor •Dash light for system status and low fluid warning •Alcohol Compatible (up to 50% in solution with water) •Progressive controller, provides boost dependent variable flow •Provides output to either decrease timing or boost if the system runs out of fluid or detects an error •Kit includes three jets to match your power requirements http://www.mvpmotorsports.com/Templates/frmTemplateM7.asp?SubFolderID=204&SearchYN=N

This week down South, Kildare (Celbridge area); a red ae111 Levin was Stolen, a Gardaí chase ensued ; the guy wrapped the car around a tree and killed himself

Hate to hear this type of news , RIP ! Taughts go out to Family and Friends, not a nice time

This is one of my favourite cars , always taught if a new Supra was made it would look similar. It is my modern Day Supra Seen one of these in Black and even with the TRD wide body this car still was wider! The road presence will turn heads. One of the guys had a straight through Miltek exhaust on a White Gran Turismo , even at 30 KM/H the noise echoing around the high raised city buildings when he blipped the throttle ,made the world stand still. If a woman was driving it , I would of asked her to marry me then and there! It is one of my top 3 GT cars , what an awesome Machine!

Iforged Daytona wheels

Thanks, some good info to know, want to get my bumper redone

Thanks guys, would another cheap blow in give you another three years?

I did the same as hodge on my gauge pod, just get some masking tape to stop the drill slipping, start with a small wood drill piece, drill small holes inside the are you want to cut out, then use a file to file it out to desired window outline Should look awesome, I do like when you can see the after market can gears, a lot of engineering goes into them, its a shame to hide them

What should you look for in a body shop to prevent this? Should you make sure they have certain equipment or ask certain questions?

Just found out i have sard hi flow cat! Here she is fitted [video=youtube;RgpPXg6z0-c]

Hi power silent

thanks

Anybody any tips for fitting? I presume it makes life easier to bolt the system together first as opposed to fitting the two sections individually? Recommended to replace the exhaust hangers? As far as I know it uses the OEM hangers, if I need any ,will you get them at a motor factors or better going via Toyota Thanks

Sorry for the thread resurrection but how often is a TRD diff oil change frequency

Nice work! Subscribed! Either this or the T67 for me In comparison to the T67 (most adhere to as the best suited turbo for the 2jz) , would the 62 be better suited for quicker spool; instant power bursts, overtaking etc? I am not after hp pub talk or top speed numbers but real work usable power on the road 30km to 120 km acceleration

Don't forget Sard Analyse too, Nic

What about the option of using Octane booster instead of WI? or blending 15% mix of Methanol? Read good things about NF octane booster

Thanks! I am just about to get a quote on some chemicals off chemical Supplier in NI , to blend with 95 octane fuel What is the best to go for Methanol RON 108.7 xylene RON 117 toluene RON 111 ethanol RON 108.6 http://en.wikipedia.org/wiki/Octane_rating

https://www.parcelmotel.com/ to Antrim , who send it to your local depot for 3.50 euro, use then all the time to avail of free uk shipping https://www.parcelmotel.com/how-it-works/ , Nightline run it

Can anybody explain to me the adv's/dis-adv's of the location of the Water injector http://www.rallycars.com/Cars/WaterInjection.html There are mainly three variations of water injection systems. They are dependent of the location of the water injectors. The first technique consists of injecting water at the entrance of the intake manifold. The second injects water at the exit pipe of the intercooler. The third technique injects water at the entry of the intercooler what octane increase will you get using 50/50 Water /Meth mix?

they are my options , Thanks!

thanks! Just out of curiosity what keeps the internal parts clean, Meth or Water? Was talking to Marty and he was saying as an alternative option to forget about water/Meth injection and just blend a 15% mix of Meth with the Fuel instead. He stopped using the injection and just blends fuel now. Central Chemical Supplies, in County Down. They charge £1 (150cents) per litre IIRC Only thing I will say is I ran E5 (5% ethanol) before and found my car runs smoother on Texaco 95. Simon found the same in his R33 but his is mapped for 95 octane so not too sure if he would notice a difference One of the other GTR(R35) guys said he runs The NF race formula octane booster