Jellybean

I would but after reading Dans thread, you have to mod them or weld them, if you push them through it will wipe out some of the female splines on the hub, resulting in the stud turning when you torque up your wheel nut http://www.mkivsupra.net/vbb/showthread.php?245411-Fitting-ARP-Extended-Wheel-Studs&highlight=Arp+studs - - - Updated - - - Never knew that! Will ask them

Would it be an issue using hose that is not re-enforced; we can get this in our sizes http://www.ebay.co.uk/itm/4mm-5-32-PETROL-DIESEL-FUEL-LINE-HOSE-PIPE-BRAIDED-/260465877615?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ca4f9e26f

Hi I need some extended studs to fit a 20-25mm spacer , do you have any that suit? The OEM rear studs are 45mm long The OEM Stud plain diameter shank next to the spline measures up at 13.7mm with the spline ranging from 14.08-14.18mm. (Pic Attached) 12 X 1.5 thread pitch The female splined part in the hub measures 13.8-14.0mm, so I dont want to try to press in a non-OEM stud and wipe out some of the female splines on the hub, resulting in the stud turning when you torque up your wheel nut Would these Suit? Length 63mm, Spline Diameter 14.3mm http://www.murraymotorsport.com/products/grayston-replacement-wheel-studs-12mm-x-1-5-14-3

I need 10 for the rear axle

Hey I need extended studs to fit a 20mm spacer , anybody know of an OEM stud fitment Do any of these suit? http://www.murraymotorsport.com/products?keywords=wheel+studs&x=8&y=19

Hey Car is an 2005 Kia Picanto , the noise emitting from the front passenger side is in tandem with the speed of the car , if you are sitting in the passenger side you can feel the vibration through the floor (not bad) any ideas? wheel bearing / Ball Joint too Also on compression , coming off a ramp for example , she squeaks and creeks ( I presume a bushing)

He was wondering why I was saying why not get second hand lol I need a hearing test, hard of hearing the last 2-3 weeks, Lady stopped me this evening asking Directions to the Trampoline centre and I taught she said Japanese centre Ears are killing me with the Flu last few weeks

You will laugh at this, he said rings not rims to me lol He needs new piston rings

Not for me I said the same thing going by toyodiy they are around 1300 euro

Would anybody have new OEM JZA80 rims or know where to get them at a sensible price

Thanks, just wanted to be sure!

Definition Brake flushing involves removing all the brake fluid from the system and getting all-new, clean fluid inside. Brake bleeding just means removing enough brake fluid to get air bubbles out of the brake lines. Question Can you buy a brake Flush clean you add to the system to clean it out? or what is the best way to flush the system?

Did anybody come across Reinforced braided hose in 4mm or 5mm http://www.ebay.ie/sch/i.html?_trksid=p2047675.m570.l1313&_nkw=CAR+FUEL+BRAIDED+HOSE&_sacat=0&_from=R40

Let me know how you get on Hopefully will have my barrels back the weekend!

Cool , thanks ; taught I will need to do a criss cross pattern torquing them up, when I was undoing them 2 mm of thread was through the nut so will aim for that Thanks

Thanks Dunk! Mine have 80 bolts and nuts ! 4 per spoke

Hex Bolt and Nut

Hey Does anybody have any advise on assembling a two piece wheel, Volk GTC, Blue thread lock, Bolt pattern when tightening , torque ? Any tips and tricks appreciated

Cool, thanks will hammerite them

Hey Quick one, I want to clean up the OEM rear Drum on the disc brake Am I wasting my time cleaning it up with a wire brush and polished it up with Autosol, not too sure of the quality of metal in them; would they start to rust again in a short time frame ?

Subscribed

Forgot about Chris, Just emailed him - - - Updated - - - Why ?

Hey Does anybody know the part numbers for the Caliper pins> I have a Jspec so my vin is useless thanks

Think it is currently 5 %

Sales tax in Japan is to increase to 8% by April 2014 and 10% by October 2015 I presume this will impact imports, Parts; just about everything