Jellybean

Lee is the HKS T51 KAI DBB kit still available at that price?

http://www.syvecs.co.uk/forum/viewtopic.php?f=6&t=401&sid=8874c9e9567dcb96f2049acaa2a83bb8

Thanks Guys

That's the haltech authorised Ireland dealer I suppose I can go outside of Dublin without getting a plane or a boat

wcp in Kerry are haltech authorised dealers so reason why I am asking about haltech , they did James deanes 2jz for last seasons drift events across uk Ireland and Europe , they must know what they are dOing as it ran 700hp all season , no issues ; Hks vcon pro is all good by me too Only other option is TDP but Robbie is the most rude arrogant person I ever met and I would question his ability to map a car based on other customer experiences and reliability issues plus he is €€€ , he hates toyotas and as a potential customer he has no problem letting you know it , I would not give him a dime, rather take the hit of the cost going to the uk Hks I would be extremely happy to use that ecu too

Dublin of course, nothing else outside it exists lol except uk europe us and the rest of the world

Thanks! - - - Updated - - - Thanks Tony!

I mentioned the remote mapping to Ryan here , I read it , he can do full maps remotely http://www.mkivsupra.net/vbb/showthread.php?315878-New-Syvecs-2014-2015/page2

Sorry just to add did the ECU come with instructions , what I mean is the some form of instruction indicating the ideal/recommended location for sensor X We should have a sticky on here for installation and remote mapping

How did it work, did you rent a Dyno , internet connection , setup an online meeting with Ryan ? or I presume the ECU comes with some form or base map , you go for a few WOT on the road, email ryan the map and they tweak? Issue with me going t he UK is your fuel is better than ours

Thanks Tony ! Looks like Ryan can remote map mine so I am good to install the setup The Haltech ECU is very Irish with regards prices to put it politely but if Ryan can remote map then its not an issue if he is in the UK , it is easier if you need support and the mapper is somewhat local

Thanks , are these fixed prices or can they vary from getting direct from Syvecs or other agents ? What do most guys pay for the PNP kit all in , I am sure a few on here have the S6 at this stage

Car is a Toyota Supra JZA80 (Zenki - 5/93-7/94) Eng: 2JZ-GTE Manual Syvecs S6 Just trying to figure out pricing with the Syvecs , what do I need ? I think I read Syvecs does not use an ignitor? (Please excuse my lack of knowledge) Haltech has two options , (Haltech Irish Agent) Haltech Platinum Sport 2000 ECU and Haltech HPI6 ignitor with a Haltech fully terminated 2JZ specific loom 3200 Euro Ex fitting or mapping Haltech Platinum Sport 2000 ECU and OEM ignitor with Patch Harness 2200 Euro Ex fitting or mapping Mapping is 350-450 GBP with no issues (Haltech Irish Agent), overall I think it works out stupidly expensive http://www.haltech.com/2j-2-go/

Thanks , No EMU at the moment or injectors ; price depending I might hold off

Thanks! Think I will be going with RHDJapan, should be ok - - - Updated - - - Really , ah crap , not good

Did anybody get the Tomei Poncams in the end , looking at getting them for a BPU Manual stock ECU

Had a chat there, and we are going OEM springs - - - Updated - - - Did they make a difference on stock turbos at 1.2 bar, worth getting? Found this its all good http://www.mkivsupra.net/vbb/showthread.php?279694-Tomei-Camshafts-for-Supra/page2&highlight=tomei+poncam

thanks Nic, I am currently looking at the Tomei 264 PONCAM's as you can run them with OEM valve springs due to the higher lift or 9.5 versus 9 on the HKS But my tuner just text me to get uprated Valve springs , now its just getting $$$ lol

Looking into ordering these, any feedback on the cams ?

thanks, did you 256/264 cams with 35R turbo , I am going the same route with a 35rGTX - - - Updated - - - Cool thanks, Dude!

Cool thanks , did you run different durations on inlet, outlet?

Hey Is anybody running 256/264 cams on a BPU standard ECU Supra Installing rocker cover gaskets and UR cam pulleys , in prep for single but thinking of just doing the Cams too so I dont have to touch it again

Would love to know the detachable bumper setup

Thanks David, sorry missed your post - - - Updated - - - thanks again Sir Would you recommend any books on thus topic

Thanks Digsy What does NVH stand for & L/R (sensible L/R harder to achieve)