Jump to content
The mkiv Supra Owners Club

r88sch

Followers
  • Posts

    97
  • Joined

Everything posted by r88sch

  1. not very switched on engine wise but they can run without fmic cant they? so this wouldnt have to be bought at the same time
  2. cant wait to see this when its done good luck on this, unlike most here i like the being different approach
  3. 2300 hmm i think i might have to start saving for this, may be a stupid question but have to ask, is it properly complete, so i wont need anything else for it, for that price?
  4. just forked out 3500 on bodywork bugga if only i had teh money this is exactly what im after
  5. i bought the jdl kit pretty much the same week it became available last year and its sat in my garage for months its finally going to the bodyshop on the 14th april, cant wait to get it done and back to me. i dint have enough bottle to attempt putting it on myself, so fair play to you buddy. looking good in the pics.
  6. hello all, currrently having a night mare with my wheels trying to take them off and have decided to take a disc cutter to them and just cut them off, however im going to lose 2 studs, not sure if they are different sizes etc but they are needed for the 2 rear wheels. does anyone have these lyin around they want to get rid of? cheers rob
  7. if i had the money definately would of had this off you
  8. personally like them a lot. due to only going to be driving the supe a handful of times a year they will be ok. the plan was to turn the supe into a show car and what better way to make it stand out than by putting lambo doors on it
  9. i was going to ask same a above has anyone done the roof linings and do u reckon itll work. i have an aerotop and have been thinking about doing it just wanted to check what others thought
  10. i done this over the weekend and used approx 3 litres of dye took around 4 hours including working in time and drying time and the carpet has come out perfect, i had to use the 3 litres due to stains and burn marks. wouldnt of been able to do it if it werent for this write up cheers bud will try get pics soon
  11. iv just bought a brand new astra sportshatch for work, after adding a little toy should be getting as my mate quoted me 800miles on a tank give or take 50, he had the chip on his b4 he sold it, plus 0-60 in justover 6.5sec for a diesel aint bad either
  12. yeah i bought a reverse threaded impact socket and tried that but its too thick to get in the actualy hole on the wheel not having much luck witth this
  13. iv got a 3ft bar, and tried the hammering a nut over the top but no luck just keeps slipping off tried 17mm 18mm and 19mm any ideas on where to buy this special tool
  14. wondering if anyone here can help me, my supra never came with a locking wheel nut, ad am struggling to find a key that will fit. I have just bought new wheels and cant get the rears off, the nut itself looks fairly rusted and has no thread left on it for a key to grip to. Anyone else had this problem and howd you sort it cheers
  15. fiesta mk 3 1.0 at 17 - lasted 3 weeks seicento sporting 1.1 - at 17 kept for 2 years - wont ever have a fiat again nissan 100nx 1.6 at 18 gave to my sister as present rover coupe 1.6 at 19 - had to sell it after some twat destroyed it mg zs td 2.0 at 19 - bought for work and the baby Then the supra at 20 bought because split with misses with baby didnt need a 5 dr car anymore also 2 vw golfs 1.9 tdi 07 reg and 57 reg - work hire cars awaiting arrival of new astra cdti 200 bhp - my newest toy
  16. i have just purchased my wheels from wheelmania and they came with avons but dude to supe being off the road i havnt driven it yet what are the avon tyres like?
  17. right part wrong time if these were for sale end of jan i would have had them straightaway
  18. dam, i definately would have given you the 250 plus the standard bonnet
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.