energy
-
Posts
40 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by energy
-
there was a BC installed when i buy the car,.. but i think it does not work how it should,.. i doesnt matter what gains or boost i config on it,.. my car is always going the same,.. so i thought 1) its broken 2) or it is not installed properly,.... so i think perhaps of the hoses,...
-
is there a mistake with my hoses ?!
-
thank your for your answer
-
This "Tube" (hose) was not sticked in and hanged around ?! What does this tube effect ?!?!i sticked it back !!
-
nobody has an idea?!
-
Hks Evc 3
-
Hello 2 all in my BC i can only set that bar and the OFFSET ( i think its the GAIn mode by other BC,but i am not sure) from 50%-150%.... what does this means ?! a higher or a lower offset... what is better ?! thank you
-
Hello 2 all I have another question for that topic,.. in my BC (at the 2nd picture) i can set the OFFSET ( i think its the GAIn mode by other BC,but i am not sure) from 50%-150%.... what does this means ?! a higher or a lower offset... what is better ?! thank you
-
Hello drivers,.. i need help,.. today i installed my TRD 320 speedo,.. it was very easy but i have no a probel,.. my sppedo is still running in MPH but in germany i need KMH,.. at the bills of the previous owner i saw that a DSC+TSD (combined) is installed.... because i have a j-spec i need the TopSpeedDelimiter but i dont need the DigitalSpeedConverter i thnik because i need it in KmH anybody has an idea how to fix that,..thank you cheers
-
thank you all !!
-
@Keith C At that Dyno time all the mods were installed,...
-
i have a SLD fitted i also have driven 170mph,.. this happended today the first time !! perhaps the fcd isnt installed correctly i will check it tomorrow!!! another question to the BC,.. at the back i have a switsch SW or PO where it must be switched i have it on internal wastegate ,..
-
@Gaz6002 Do you know perhaps what the reason when i accularate to 120mph and my machine "brakes" like an enigne brake?!
-
there is one fitted on the ecu,.. it has 4 cables and on it is written TRL !! i dont know if it is corretly installed but there is one avaialbe,... i want to drive 1.2bar,.. but it doesnt goes and i dont know why,.. how much would i have HP with 1.2 when i have with 1.0 335 ?! PS: have i know 335 at the wheels or at the machine ?!
-
so i have 385 HP or did i understand wrong ?! My problem is also with the boost controller,.. it doesn't matter how much bar i config,.. my supra drives always the same.... i noticed when i accularate that the boost only go a lil bit over 1 bar and then sink down again to .8-0.9 and today at a testdrive i noticed that my machnine stopped me at 120 Mph,... is something wring with my car ?!? I would like to feel my machine at 1.2 bar to see if i see any difference in power !!??? PS: how othe users have over 400 HP with j-spec bpu,.. how can i get it,..thank you
-
I think @ 1.01 bar it was measured by THOR racing i dont know how,.. i come from germany !! i have another one look
-
100000 kms
-
Hello Drivers Some months ago i bought a supra 93 J-Spec TT AT... i have the following mods,... Apexi air SLD and FCD THOR Racing Blitz Nur Spec no cats Chris Wilson restrictor iridium plugs and a electronic boost controller HKS EVC 3... i only have 335 HP isnt it to less power for these mods ?! or is there something wrong,.. here you have a dynorun,... and why is the such a big leak at the torque graph ?!?! thx and have a nice day
-
i still have the stock j-spec suspension !! later perhaps HR or TEIN,... is it better to drive front 9 oder 9,5 when rear is 10,5
-
okay thank you 9x18 at the front with 245 is okay but at he rear i want to get bigger than 275... i thought 295 would it be a problem ?!
-
I want to buy the Double Sixes,.. which size would be recommend,.. i thought in front 8,5 or 9 x18 tire size 245 and back 10,5x18 tire size over 300 !! is this possible,... ?!?! my front brakes are the Brembo GTs and at the back j-spec brakes thank you PS: sorry for my english
-
thx homer
-
at the moment i have BPU at my supra,..so about 400 hp.... i am looking to get more than 500-600 HP
-
93 Rz
-
What would it cost to do that at a J-Spec TT automatic ?! cheers
