Paul372
-
Posts
2211 -
Joined
-
Days Won
1
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Paul372
-
Mines been done over a year ago now mate and i've had no problems with it, it works great
-
that's how i've done mine mate, the same way as that picture, by stripping down the aircon pump and using that part of it as the bracket
-
I've email you some pictures over mate hope it helps, try and post them up
-
right i've checked my phone no pictures on there so they all must be on the laptop , ill try and get it working so i can upload some pictures for you, if not i'll take a picture on my phone of how i've done it on the supe ok mate,
-
i have got some pics somewhere but my laptop broke but may have some on my phone pm your mobile number or email and i'll see if i can send some over
-
i've done mine, i took out the pump, rad, fan and all the pipes, i block off the pipes near the bulkhead with a home made blanking plate, i ran the shorter belt supplied by whifbitz and with the old aircon pump i striped it down so i just had the bracket left that mounts to the power steering pump etc so i knew everything was held in the correct oem position and just had the bracket powder coated black
-
anti roll bar on my tt jap spec is 30mm think front and the rear is 21mm as i've just ordered new superpro bushes
-
wanted Auto Supra TT for £5k to £5.5k Preferably black.
Paul372 replied to TubbyTwo's topic in Supra Classifieds
there's lots of tt auto's in the for sale section around the £5,500 mark -
http://mkivsupra.net/vbb/showthread.php?254077-Jap-spec-tt-storm-blue-auto-£5-500 that's a good budget for a tt auto, there's some good bargains out there at the moment, your have some money left over to play with
-
and you shouldn't of use heat it will damage the rubber on the crank pulley and may have damage the crank pulley seal as well
-
you need a special tool to lock the crank pulley then use a breaker bar and a scaffold tube, they are well tight but it will go, i made my own tool to lock the crank pulley
-
I was in my van when i spotted you near brandshatch about 12.30 ish
-
Red kitted supra along crossways near Bluewater about 4ish
Paul372 replied to Paul372's topic in Was it You?
spoilerless, silver rota multi spoke wheels with trail rear bumper -
Spotted red supra today about 4ish, you pulled up infront of me in the outside lane along crossways near Asda, you then headed off towards Bluewater
-
Pic's of Hid's 6000k with Led sidelights AS REQUESTED
Paul372 replied to DodgyRog's topic in Supra Chat
ok mate cheers, i've email them about the problem. i let you know how i get on -
Pic's of Hid's 6000k with Led sidelights AS REQUESTED
Paul372 replied to DodgyRog's topic in Supra Chat
i ordered the same led sidelight bulbs but they seem they don't fit, did you have to mod anything, the end of the bulb is not long enough to make contact with the bulb holder, i've compare them to 501 bulbs and there alot shorter -
Hi, i'm trying to sort out some van insurance, can anyone recommend some cheap van insurance company's, i've got a few qoutes but there prices vary so much, thanks
-
what leds bulbs are peeps using for the number plate lights
-
anyone try these for the interior light http://www.ebay.co.uk/itm/320570408326?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
-
are they leds bulbs you upgraded to, i'm thinking of doing the same
-
Hi, could someone please tell me the correct bulbs i need for the interior light and number plate light, i have one bulb out on each, i've done a quick search but couldn't find anything about the bulbs sizes, Thanks
-
yes please mate that would be great, cheers guys
-
Hi, could anyone tell me if the seal on the rear window on the tail gate, is it modded to the rear window or is it separate, can you buy the seal on it's own, Thanks
-
That is one big project i would love to work on that, that's going to be an amazing house when completed
-
you would think so but the police don't like work they cannot be bothered
