Ryan.G

Last thing i forgot to mention Steve is you need to fit a Bosch 040 pump as the walbro is struggling at this level now. Ryan

But it is one awesome torque curve

Screw the graph dude i thought you would mention the wiring first

An Update!! To start with, the installation of the S6 wasn't as straight forward as first thought. This was due to the previous Ecu installation being rather bodged to say the least and after seeing the state of the wiring i knew something had to be done. Instead of just hard wiring the Solaris into the existing wires which had been used i wanted to put it back to stock to ensure that the wiring pinouts i have for the P&P units is 100% and to make the install look alot nicer. 8 hours of soldering and heatshrinking later.... I didn't get a picture of it before as was in a rush to get the old stuff off for steve before he left but steve will see the improvement The next day i made up the wiring adaptor loom. With the Cal Switch and flying looms Pat and I then fitted the ecu into the car, turned the WI off and checked the engine bay over. Found a few problems with vacuum plumbing mainly to do with the pulsation damper not being used for the Map sensor and the FPR. We also checked for boost leaks using my niffty tool We then started the mapping and 5 hours later Ryan

Straight Link Junkie

Will Speak to Gledo and Chris about the brakes and go with what they recommend but will also look into other calipers and weights etc

No worries well if you want to have mine to have it re cored them you can just swap it straight out in the same day

Arhh but i have Vineys number so Mkiv pm system is abit slow Anyway you dont need a Cage for your car as its a SLJ car Use the money to buy Adi a nice christmas present !

Dibbs on Cage, Be ideal to work from for my car Ryan

I have a complete heater box unit with matrix that i pulled out of my track which you can have for free if you collect chap. Ryan

Will try and get some more pics and info, maybe get one with a return policy if not happy.. Thinking of going with just a uk setup with your pads ? Im not a fan of these massive kits as it means bigger wheels which i dont want.

Thanks Paul, Will have a think as need to decide which i want to go with the Gt3582. Uk or 256 Ryan

Chris, Found a Pedal box with a 7:1 ratio. What you think? http://www2.obp.uk.net/catalog/product_info.php?cPath=32_52_88_93_94&products_id=231&osCsid=c2f14bfa45534350fd7ab31ed3b65896 Looked into the Tilton stuff but can only find 6:1 What Ratio do you think is needed?

Just weighed all the old connectors and wiring etc from everything i have removed and it came in at 7.4kg. Happy with that

Have now added a better pic to first post with the unit lite up Ryan

Today I sorted all the wiring for inside the Cabin Area. I was going to make a complete custom loom for the car but thought taking to pieces the old loom would give me an insight into the stock wiring, so that in the future when i have to fix problems on other cars i have a better understanding of where stuff goes. It was a wise move As you can see below there is alot of wiring as stock. Now a couple of hours later i had sorted the Interior loom by stripping wires out and un-pinning then from the connectors When im 100% that all the wires are good in the below loom i will wrap it up so it looks nice and Tidy This is all the wiring that is not needed when you have a Dash2 and no heater system After finishing the inside, i cracked on with the Engine loom. Most of the loom i am going to keep as it is as there is only about 6 wires which im not going to use in the engine bay as the rest i have used for other sensors like EGT, Oil Pr, Oil Tmp etc. Once i had sorted that i wired in the Solaris connector and all the flying looms for Cal switches, Traction Pots, ABS wiring, Lambda and CAN etc. Will be back on the car on Thursday as im up north the rest of the week. Ryan

Hi Jon Yeah as long as the mininum boost with the new spring is in the same range of boost it has been mapped to now then it will be fine. Will be working a few days over christmas, best to pop us a PM. But im definatly away in austria from the 4th - 10th though.

Hi Miles You cant program these but it will show up any error codes which have been created due to a problem on the engine. Ryan

Dont be stupid Jon, Get Chris Wilson to sort your suspension and then enjoy it next year at more track and drift events. You are more than welcome to Join Wes, B'have, Tony and Myself at all the track days. Ryan

Stock Manual TT Ecu £50

£60 now for both

£75

Set of Uk Cams If you have any let me know please asap Ryan

Tell you what though. I wonder want a set of UK cams would be like on the Gt3582 Anyone got a set of UK cams spare?

With the cams Dan, go with a GT35R...