Ryan.G

Problem Fixed Issue was the Aftermarket Throttle body fitted has a different swing direction to the standard Throttle sensor.. So when the throttle plate was closed it was producing 4.81v and open 0.79v. The stock ecu and EMU think that 4.5v + is the throttle open so the emu was enabling anti foul mode where it doesn't add fuel. Got round this by using the Sub throttle position sensor and rewiring the Pot to suit. Then had the issue with the error code 14.. Problem was due to another wire being T'd into the IGF wire which linked to a set of resistors interupting the feedback to the ecu. Removed the wire and ran like a dream

£45 for you

bump

bump

sold

Sold

Sold

Havn't got a clue now mate! Im just waiting for the weigh in Ryan

Back is the stock one but Front will be custom one due to V mount setup

After viewing a few WRC cars it only seemed that any triangulation strengthing was used in areas where there is an angle of 45 or less. Mainly around the door bar areas. http://www.subiegal.com/gallerymain/wrxwagonrally/crashwrx/wrxrollover/rally-crash-wrx.jpg http://www.unc.edu/%7Eafrick/focus/20.jpg With regards the flooring i would say it has too much strengthing but Steve has the final word I wanted a cage that i felt was strong enough but also did not sacrifice to much weight. Ryan

Few more update Pics from today Got the suspension fitted as well as the subframes and then started refitting all the Alu panels now Steve kinda sprayed them last night p.s Please ignore all the random bits of sealant i promise i cleaned all of it up but that tigerseal gets everywhere!!!

Rest of the Shell is sprayed!, Big thanks to Steve who stayed in late on Wednesday night to finish it off. Pic of some of the bits cleaned and bolted back on from yesterday Sanded down all the Inside panels ready for spraying Prep'd the rear Subframe for seam welding

Not a problem chap although you might need a Solaris s8 depending on what other systems your engine has ie FBW, VVTI etc

John What fuel pressure and injectors are you running. Are they low or high impendance... If low do you have a resistor pack fitted

If i have time, no problem. Find me on the day.. Im the short fat one Ryan

One word Mate --Solaris-- I cant fault it at all and cant find anything close to beat it in price for its reliability and functions. http://www.mkivsupra.net/vbb/showthread.php?t=171619

Dash2 will work with an AEM fine. Pig has one in his beast with an AEM. You need the serial to Can adaptor though

Nice work on the wiring mate

No chap, with how solid the chassis is at the moment i reckon it could be a reciepe for disaster if we solid mounted the engine and gearbox

Nice to meet you chap Today i have been cleaning up the subframes with the steam cleaners. Before i did this i took all the Siezed bolts out and cleaned them up and covered them in anti seeze grease to make track side changes easier. The subframes are then going to be seam welded to take out any compliance. Then finally painted

Power runs: 1. Tricky-Ricky (Supra T61 6spd) 2. ToyotaGT (MR2) 3. P 17eed (Supra NA auto) 4. AlexM (Supra NA 5spd) 5. Little num (Supra TT 6pd) 6. Bignum (Supra Boostlogic T67 6spd) 7. EdMorris (Supra 2UZ) (tbc) 8. Adnanshah247 (Supra Boostlogic T67 6spd) 9. Magnos (Supra TT 6spd) 10. Budz86 (Supra NA 5spd) 11. Gaz1 (Supra Boostlogic T67 6spd) (tbc) 12. Pig (Supra Boostlogic T61 6spd) (tbc) 13. Benszr (Supra NA 5spd) 14. The Punisher (Supra TT 6spd) 15. ahaider82 (Supra HKS T04R 6spd) 16. JamieP (Supra Boostlogic T67 6spd) 17. 18. Mapping (please contact Ryan or msyelf if you wish to arrange a slot): 1. Fearless (Supra T78 6spd) 2. Pig 3. Magictorch Spectating: 1. Homer 2. conncl 3. Stonkin 4. Wez 5. Justgav 6. GrahamC 7. Bonus_2000 8. Chingy 9. B16GTF 10. 11.

Hopefully... All though im not so sure i want to take it on the road at the moment! They will be sprayed next week with other bits. When Prepping the shell alot of crap gets into all the holes and corners, its near impossiable to ensure that you dont have any swarf in them... So to make sure the outside is spot on its sprayed after. Ryan

SLR Pics

20:20 Finished and Curry time

Offer is still available