Ryan.G

Have you got the support cable buddy and software is so you can read the map and save it. let me know Thanks Ryan

yup after 14.5psi the ecu just goes 100% injector duty hence why goes rich. Double De-cat running 1.0bar HKS Superdrager 2 exhaust CW SMIC TRL VVFC FCD Walbro Fuel Pump RLTC w/launch control nothing wrong with car bud have error checked and watched the injector duty Just toyota playing safe

Not going to be BPU for much longer but the jspec overfuel heavily after 4500rpm was seeing 10.3 on my wideband datalogging last night at 1bar. Way too rich for me, wasting to much fuel. Toyota did a good job on the lean cruise burn though and cold start enrichment

Just wondering if anyone has any problems with these two running together as they both tap into the same wire for the injectors at the ecu and wondered if it caused any conflicts when cutting injector pulses on the emanage Thanks

Hi Going to start tuning my e-manage blue this weekend and was wondering if anyone had a base map they could send me to get me up and going on a jspec tt running 440cc, twins and bpu mods Ryan

To bleed the abs system you need to have the engine turned on and try and keep the car level as possiable. 2 poster ramp is ideal

What amplified setup do you use Wez?

pm me pls

What kit do you use Wez and alex The experience i had with 3sgte was using set of big ear defender with rubber hosing to bit of copper pipe which was flattened and drill to bolt to block. Its always better to put the mic on the intake side for sure

Thanks wez Were have you found the best place to attach the det cans too in the engine bay

Anybody tried one of these or is the good old det cans the best for listening to knock on a supra Had good results on a mr2 with det cans but not sure if the 2jzgte engines are noisey at high rpm to hear det. Is there much ghost knock on a supra too with the noisey getrag gearbox Thanks Ryan

Now sold

£30 Pm me

£60 Pm me

Now sorted

Pm coming your way

£55 delivered Already primed in 2k primer and in perfect condition Pm me

Hi I have a black doluck front bumper but now seeing on car thinking i want a more subtle look, So wondering if anyone has a top secret bumper in black they would like to swap with me. The doluck is perfect fit with bolts intergrated in fibreglass for easy fitting and has under tray also. Could be original Pm me please

) Jamiep RR & BBQ +1 2) Supradibbs BBQ No dyno car will still be running in 3) John R32 RR & BBQ +1 4) Muffleman RR & BBQ 5) Mr Lover RR & BBQ +1 6) Marco BBQ 7) Terribleturner + Sabrina 8) Jay_NW RR+ BBQ + 1 9) Ian R bbq (maybe rolling road if you can fit my car in) 10) Dan Turner 11) absxxxx RR 12) uzthedentist 13 Jonty RR & BBQ +1 14) Henk (Hen4732) RR & BBQ 15) Arsehole RR (subject to car being finished) & BBQ 16) Supra st myster RR (if i get my car fixed in time) and BBQ 17) Pig BBQ 18) Homer RR & BBQ 19) supraloopy 20) AshBhp RR & BBQ 21) GazzGSi RR (If cars complete & BBQ +1 22) Supranick RR & BBQ 23) Johnd-mkiv (providing the car is still on the road) 24) MK47 - BBQ & *MAYBE* RR 25) Martin R and Callum R - BBQ 26) G-Nemie - BBQ (fingers crossed, new work rota out today) 27) Tooquicktostop (plus one for BBQ) 28) Carbonangel - BBQ & RR 29) Sheefa BBQ & RR +1 30) EncoreWRC BBQ + 1 & RR 31) TheChin BBQ + 2 & RR 32) supra_surj BBQ + 1 33) spaxy. 34) CJ BBQ x 12 (I will probably be hungry) 35) R3DG3CKO - BBQ 36) Pistonbroke - BBQ + wife 37) Ryan.g - BBQ & RR

Im Interested Subcribed

Arhh Hail Chris

Ok looked round the whole car last night and only bleed nipple i found apart from on uk brakes was one of clutch cylinder How do you bleed the abs unit and master cylinder???

I have just looked into this but cant find anything on bleeding abs If anyone finds it please post how

I have just brought a autogauge oil pressure gauge and wondering if the sender unit just screws straight into the bolt. The sender is 1/8"-27NPT

Hi alex Thanks for reply So basically as ww.max-boost.co.uk has done with putting the catch can inbetween the breather hoses you just put the hoses into the intake piping of the t67??