Dave S
-
Posts
221 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Dave S
-
Hi...despite trying different settings on emanage....engine will only start using Easy Start...then runs fine ....I've a new O2 sensor on order but I've been told that the ecu doesnt read it while cranking....looking for more ideas of possible causes please! thanks Dave S
-
Hi...need to borrow a known good O2 sensor......please please please may be the cause of my probs......but Toyota want £140 + for it ...?? bit expensive to buy on spec. many thanks Dave S
-
Ian ...any chance you can elaborate on the cold start mapping bit.... cheeers Dave S
-
couple of things ....after you left I took it off the axle stands and tried it in gear......I get warning beeps in reverse and it wont move???.... going to check a few things tomorrow and give you a call if thats ok?? cheeers Dave
-
At last my new 'built' engine is finally running .... major thanks go to Slowdog for ultimately solving the problems and coming up to Ealing from Basingstoke on a cold Sunday afternoon.... also like to thank IanC and Matt Harwood for their help with the emanage and alarm probs....... lots more work to do yet next stage is to get it moving and and an mot!!! cheeers Dave S
-
thanks terminator.....found it.........hopefully will solve the prob...... cheeers Dave S
-
Thanks Terminator......I'm hoping this not being plugged in is stopping the engine from starting....the warning light comes up on the dash.... does the warning triangle appear when Ign switched on??? cheeers Dave S
-
I'm assembling a car I didnt take apart....I know the sensor is usually cable tied out the way when de-catted....just maybe someone has lifted the carpet in the drivers footwell and seen where the connector goes cheers Dave
-
Having trouble finding the connector for the cat temp sensor once it goes through the floorpan....anyone know where it should be ??? cheeers Dave S
-
many thanks m8 ....will do.....pm me your address and I'll Special D it... cheeers Dave
-
anyone know who in the uk deals with repairs to Greddy stuff..... cheeers Dave
-
really would be pleased to be wrong....but it aint communicating...
-
it doesnt communicate with PC or E01....so cant import ,export,or update.....in support tool the green light ,top rhs flashes continuously....in E01 ERR flashes in the top bar...prob need to send back to Greddy..... cheeers Dave
-
its supposed to read the settings directly and give version info etc..........the ports not communicating...it was working fine a couple of days ago....seems like the ECU connector probs I have has taken it out...
-
ATM its on the bench plugged into my PC Dude...
-
stays on green..... its a Greddy cable...
-
2 different usb cables and the special cable that comes with the support tool....
-
Help..need to fix faulty E-manage ....not communicating via USB port with PC or E01......well out of warranty ..... cheeers Dave
-
keeps pointing back to ecu connector.....or maybe a duff emanage ......its stopped communicating with e01.....b****x cheers Dave
-
getting error codes 14 (ignition signal) 31 (Airflow meter signal) and 47 (removed trac butterfly).......its a Jspec ....i didnt think it had an airflow meter?? any ideas please... cheeers Dave
-
V. interested in the ecu connector fix Ian....i've major intermittant probs there.... been trying for days to get the engine started..... cheeers Dave
-
he signs on here as arnout ....
-
Hi Charlie....Arnout at supras.nl supplied mine........ DaveS
-
I have one (igniter)....its the same but from a 1JZ so you would just have to change over the bracket to fit the 2JZ......£50 cheeers DaveS
-
Hi...cant seem to find anymore the instructions for wiring in a resistor pack into a Jspec...think it was by IanC ....any links?? cheers DaveS