HERBIE

mate ur price seems spot on to me,markets bit funny this weather for selling just.If could get shot of my NA to get the rest of your asking price up,i'd be at ur front door lol give it a few days.at that price someone will snap you up on a great lookin supra

I was about to go and get a single transplant for my NA but this is much better value.I've a cheap NA would be worth bout 2750,but need to see bout getting the funds for the rest.was intending on waiting til next month to start my initial plans to give me time to get all the money together.i'll PM you mate if i can get it together inside next week or so

how much for the lot? if ur getin grooved fronts will u be changing calipers to? would possibly take everythin if you gimme price....

if ric doesnt take these please PM as I need set

it was very much appreciated mate and im trying to get the money all together at present and a few changes to the spec

thanks chris.will be having a detailed look through all the posts and taking out/changing what seems to be a lot of waste parts from the spec i had outlined,seems to be quite a few parts OTT

as said before paul,im unfortunately not that mechanically minded and have got this from the specialist ive been referred to.i will point all this out however and Nic has sent me some very useful information.I had the intention of getin around 600bhp for a really good,well setup street car.had contacted Gaz at Envy for a spec and price but heard nothin back so took it he might not have been interested in the work but i may get back in touch and also send Chris and Michel a PM in relation to this to seek some advise thanks for the help mate

will look into this mate,have been referred onto Marty by quite a few people so i know im in safe hands when all this starts

Supra specialist in N.Ireland.thanks for pointin that out.as i say not mechanically minded

have been speakin to him,he gave me this spec

will have look at that Jamie,cheers.iv been saving for a long long time to do all this and have had some money left to me.its getin released on my 21st birthday at the end of september and i hope to start the project off very soon after this.it will be kept as my second car as i'm currently looking at getin an NA to drive around all the time.fingers crossed it all works out

feel for ya mate,hopefully you get all sorted

cheers Jamie.yea it adds up to quite a bit but i think the price i got is quite good,as its for doing all the work and having it fully prepped so all im doing is getin in and driving away.havent really priced round,just takin it that the specialist i enquired with is giving me an honest price for a good build as there is a scarcity of specialist mechanics in my area

thanks mate,will look into a set from titan

Hi Guys Been trying to organise a full parts list for a project car and after extensive discussion with specialist tuner near to me have come up with this list.Just looking some honest advise (as i know a lot of members have done project cars) on anythin that hasnt been taken into consideration.Im not the most mechanically minded person and told the specialist what i was looking for and this was what he ended up drawing together,and he said it would do no harm to check out what people have done projects before say regarding anythin they've fitted in this list that proved problematic.Theres a lot of money involved in it and as you'll appreciate,you want to make sure your doing somethin like this right.any comments are greatly appreciated guys Engine: Supertech inlet and exhaust valves (ss) +1mm Supertech Valve Lock Set Supertech dual valve springs Supertech Exhaust/intake Valve Seals PHR Titanium Retainer set HKS 264 inlet 264 exhaust camshafts HKS Cam gears in/ex ARP head studs HKS head gasket Toyota OE engine gasket kit Carrillo Forged H-Beam's and SPS bolts CP Forged Piston Set ARP Main Crank Stud Kit PE bearings through out ATI Crankshaft Dampener PHR Modified Oil Pump PHR Solid engine mounts PE Timing belt PE oil filter New OE water Pump Turbo and exhaust: HKS 50mm stainless steel T4 exhaust HKS GT 60mm external wastegate 65mm 321 stainless wastegate screamer pipe 3" mandrel bent downpipe with V-band 3" mandrel bent midpipe with V-band 2.5" mandrel bent aluminium drop-down style intercooler piping High gloss 3-ply silicone connectors 4" air intake tube 4" K&N high flow air filter PHR GT62 turbocharger with polished compressor housing 10AN stainless steel braided oil drain line 4AN Teflon stainless steel oil feed line 4AN Teflon stainless steel wastegate control lines Stainless steel turbocharger gaskets Stainless steel locking exhaust manifold nuts Stainless steel hose clamps New OE oxygen Sensor PHR turbo blanket HKS Carbon-Ti catback exhaust system Fuelling: Dual Bosch 040 fuel pumps 17.5mm (-10AN) high-flow fuel rail Aeromotive 13109 fuel pressure regulator Earls -6AN Stainless Steel braided fuel lines Hi-flow Earls fuel filter 850cc fuel injectors Cooling: AEM Water/Alcohol Injection Kit PE sports stat Polished upper hard pipe PE lower pipe Greddy 16row oil cooler + filter relocation kit Greddy Front Mount Intercooler Kit 3 row PWR radiator Transmission: New OE front, rear and selector seals New OE snap rings and F/w bolts TRD clutch line TRD gear box mount TRD LSD AP Engineering Shifter Bushing kit NEW oe Flywheel Spec stage 3+ clutch kit Suspension: R2 racing front bush kit R2 Racing rear bush kit Tein Flex coilovers with EFDC Controller Do-luck Floor bar Do-luck rear bar TRD front strut bar TRD front&rear sway bar Brakes: Brembo F40 front Kit Brembo F40 rear Kit Stainless lines Motul 600 Brake fluid Main Electronics: AEM ecu, 3bar map, AIT Tein EDFC HKS DLiII AEM UEGO wideband AEM Tru-Boost controller Hks water temp, oil pressure, oil temp gauges

Thanks for pointin this out mate as i was gona get kit from these guys,gona have a rethink now

http://www.replikit.co.uk/kits/supra.htm They do a trial rear man,and looks quite good from the pics

you have pm and payment mate

ahhhhhh! wish i had the money for these! get paid this friday comin at end of month,n if thru some miracle of god ther not gone n i have enuf man,il be sendin u pm straight away.let me know if they go pls man,i am genuinely interested

u have pm man.still waiting to here from seller on this thread tho bout this wheel

mate can you send me pm with price including p&p to n.ireland? have a trd wheel on my new NA that i hate and want rid of asap,will take this if can be posted

Yeah jus needs to be done carefully.hoping to have it on the road for september

ill have a look at the wheel issue,thanks daston yes im aware of all this daston.my friend does bodywork for full time job and ive been helping him with his car and few of our friends cars for quite sometime now and he reckons with time and patience we can get a real good job done on my car

matt ive no interest in arguing with you mate.you want to try and annoy somebody pick someone else,im not explaining meself to you all the time because you think you know better,after all,as ive said already i want somethin like Ibrars not a replica

As i said prior mate im doing everything myself,and have all the time in the world to get it done.geting a lot of materials for free from a bodywork man who i recently got some car parts for who insisted in taking nothing off me hence the price is not an exaggeration