Konrad

It was not him to insist on GETTING "something" at the first place.

You are 60% Geek! Oh dear :/

Does anyone knows where I can get flange with 2cm diameter for Greddy BOV? Seems that everyone selling Greddy and Greddy copy BOV's with 3cm diameter flanges. I would appreciate help with this Is 1'' diameter good enough to fit this on stock pipe? Konrad

So as a proper english bred person you should love it.

I'm supprised your rott allow some random person to touch him at all. My Mars (RIP) would prolly reap them apart.

"I'm currently scratchbuilding a reasonably scaled Toyota 4A-GE engine for a concourse project"

You need FCD, but if you are running 1.2 bar already you have to have one anyway, as at stock car you would be cut out at 1 bar. Could you say, what mods you did to your car?

Engine is pulling very good (well except that my bloody clutch started to slip ), still had no occasion to find reason of this rattle. Got stuck at M6 too It's good precaution to silicone ballasts, less headache and messing with headlights/cables/connectors later on

Take off left exhaust heat shield, it will catch pipe sometimes and give you strange sounds

You get carried away slightly here mate, nothing wrong with their downpipes or decats. To original poster: What's the sound on those?

Yes, that's the one

... like bulb going off after few seconds, short loud buzz in ballast and light going off or not going on at all, light going off out of nowhere etc. and you already have relay harness installed - you should try and open your ballast. I did open mine today to find out, that "waterproof" is not always a case with those There was some dump, some drops of water and slight rust getting onto circuit board. I did clean it up, removed and dried paper designed to catch water and sealed it again from BOTH sides using headlights sealant (it was Tiger something). Ballast is in perfect working condition again and this time I'm pretty sure there is no chance water can get inside So if you have "shot" ballast - open it and clean it before you will throw it away.

internet sadly...

Sorry to hear this Chris.

It's non cost effective to import NA's this days. Just have a look at Sales section...

2600 pounds inc. FMIC - done by Keron.

Yes, it was call for attention and we as a society failed him...

Thou shall keep vodka for personal use only!

Keron just finished mine today and it's wow There is not even sensation of speed, it's just a feeling that car weights next to nothing

It's stock for now, running 0.9 Bar. Yeah, there is no chance to put stock box because of pipe, I will build heatshield for Apexi cone, should be ok I did already started BPU - fuel pump is there, boost gauge/boost controller on the way from US (AEM Tru-boost), will get FCD later on, 1st decat pipe, colder spark plugs, AFR gauge, restriction ring ... Jeez I seriously need some overtime to do I will get there eventually

Yes... I had to take off engine from lovely facelift NA to make place for this big bully!! First impression - you cannot take off your eye from speedo - once you try to have give it WOT in few sec you need to brake because bloody thing is just shifting like on 3rd gear even if it's already on 6! (and doing 130+ leptons on private track!). It feels like Supra would weight 300 kg Fun and adrenaline, although it's not that scary as I would expect - it's just very quick now

To my disbelief - yes it was But then again, my sis is quite a big girl

Seen this in todays Metro ...

... my happiness At 15:30 I became officially UNCLE. My sister gave birth to healthy, HUGE (11.6 lb) boy (future petrolhead) Konrad

Isn't XboX/PS3/any console pad crippling this game? I just cannot imagine anyone playing FPP (First Person Perspective) games - especially shooters - without mouse. Reaction time and aiming on pad have to be absolutely terrible!