Konrad

hmm?

Mine!

Nah, just clean then using one of those compounds. No need to put glass ones unless those are completely crap

Nice car. Now get some T-cut, ScratchX or 3G compound and scrub this yellow crap from lights!

Ah witam na pokładzie Nieczęsto czytam New Members forum, przepraszam za opóźnienie 20k to od cholery na Suprę, za 12k dostaniesz naprawdę świetny egzemplarz. English ver: Hi, welcome on board. I'm not reading New Members section too often, so sorry for late response. 20k is sh&^%* of money for a Supra, you should be able to get very nice one for around 12k. And one of those is there temporary (Jola's Supra) @turbonut Thx for pointing me out this thread

http://www.mkivsupra.net/vbb/showpost.php?p=1220993&postcount=11

Pm'd 2 days ago, no reply...

I got Nikon D40 in cashback offer, it is unfortunatelly "bulky" SLR one but picture quality recompensate size If you want compact one, go for Sony Cybershot series.

I got more as an ransom because teddy had a long trip from Poland to England. My sister was delighted

You will need: 1) Sister or girlfriend 2) Her favorite teddy 3) Camera and some free time Kidnap teddy, strangle him, make pictures. Then send her e-mail with demands and some threats. Give her 1 day time and place to put ransom in. After that just enjoy your well deserved sweets and drinks Oh... and give her teddy back till next time

It's very,very,very boring job. I have few friends in bus division, they came off from metro and they said that they was ultimately bored in this job. Take it only if you are after some money to do, if you are looking for new experience, well ... join army

It is full engine swap, ECU swap and optionally gearbox and clutch swap. AFAIK gearbox is additional 2.5k if you do not have 6 speed one.

yes

You will probably have to bleed it again with someone looking on piston, if brake pedal is going that far before breaking, there is air in system. What brake fluid are you using? Btw. as far as i know, you do NOT need to bleed system, when changing pads...

Thank you I will check this, when changing fuel pump to Walbro

Hello I have a little annoying problem here, seems my fuel gauge needle or something connected to needle refused to work It was working fine for some time, showing fuel level from full till almost empty and then suddenly stuck in one position. After refuelling car needle didn't move at all. I took out dials to recheck needle fixing and put in again, set it on full (with full fuel tank) and put it back together. Needle went down 2mm when readjusting itself and then stopped for good again, so I assume it is still not working. Low fuel warning light is still working fine. So my question is - how fuel level is measured in Supra? Is it some kind of sensor floating in fuel tank? I suspected, that this sensor can be stuck somewhere... Or maybe there is some kind of fuse responsible for fuel gauge? What cable colour is it and on which of 3 connectors behind dials? Konrad

This one is not spinning up, so I doubt any try with MBR will work. It's prolly fried board.

You are 28% chav! Oh my It have to be Stella and frozen food

i do not get it ... Is he threating legal action, because someone said that AEM sucks or he screwed up some job, blown customers engine and customer dared to say this on our forum? If it is because of no. 1 - well, it is my personal opinion, AEM sux because of crap logo - sue me If it is because of no. 2 - just get rid of this guy from our forums, AEM cannot be responsible for what some guy is doing using their equipment , I could blow up anything including metal ball, if I would try long enough. Again, sue my ass, sad moron. It was my personal opinion. PS. why on earth mods dealing with this kind of people? Just ban this guy, ban his IP, do not allow him on this forum anymore! What a great way to loose customers just because someone is critisizing his job lol!

It's blue led converted

Everyone recevied dials and no pics yet? Soo, there you have few made with my new cam.

Ahh why now?? My bank manager will be mad I suppose I was looking for this alternative so subscribing this topic. Do not forget to give final price at the end