Jump to content
The mkiv Supra Owners Club

charleshmlee

Followers
 View Profile  See their activity

  • Posts

    17

  • Joined

 Content Type 

Everything posted by charleshmlee

  1. charleshmlee
    May I know which colour ones this collapsed hose is referring to?
  2. charleshmlee
    The cig lighter and the front glove box light
  3. charleshmlee
    Can I suggest you to take a look with your fuel pressure system, such as leaking injector/faulty fuel pressure regulator/faulty fuel pump can also be your problem since these components can go funny in reaction to heat, that make it difficult to start with warm engine.
  4. charleshmlee
    Any update for your problem lude?
  5. charleshmlee
    Here is the list you should check: 1. Fuel Pump relay 2. Fuel Pump regulator and filter 3. Fuel pump ECU 4. Coolant temp sensor 5. Gounding point 6. Fuel Pump 7. crank sensor and cam sensor if neccessary Goodluck
  6. charleshmlee
    Change your engine coolant sensor(with 2 wire) near to the engine side of the upper water hose. I had the same problem like yours a month ago, and that was the fix. Cheers
  7. charleshmlee
    Change your engine coolant sensor(with 2 wire) near to the engine side of the upper water hose. I had the same problem like yours a month ago, and that was the fix. Cheers
  8. charleshmlee
    Hi there, My car seems to have the same prob as you did, can i know what was the fix at last? Thanks
  9. charleshmlee
    People here may ask you describe how the noise is liked. However, did you check your engine mount? it may be the source of noise if it s liked some popping sound. Good luck Charles.
  10. charleshmlee
    I remember some in the forum has said these actuators are not sold separately from the turbo.
  11. charleshmlee
    Thanks for the info. My Supra is already in apexi wiring as described the diagram. So I will have a try to route the vacuum line back to the EBV VSV, and see if I can get a better transition from 1st to both turbo by getting the prespool work running. Cheers
  12. charleshmlee
    Hi there, Just wonder if we really need to bypass the VSV of the EBV(circled in red) and let it opened all the way for this Apexi Boost controller setup. Are there any benefit with or without doing it? Thanks Charles.
  13. charleshmlee
    Hey I used to have a Wilwood superlite 4 pot for the front, its stopping power is real good comparing to the stock 4 pots. I used a set of feredo pads. However, there were too many clinking sound from the calipers which I found it too annoying to fall back to stock 4 pots.
  14. charleshmlee
    That is the VSV bypass because you must have an electronic boost controller installed that requires to do that.
  15. charleshmlee
    No Problem. See you next time! Cheers, Charles.
  16. charleshmlee
    Wow, will buy it once release! haha! The coming Sunday 08 Mar 12PM we will meet up at the parking lot area at exhibition centre of Kowloon bay and to cruise together to attend the Orbis Charity Modified Car show at 8 Austin Road West, TST. Time for the almighty single supra to show off. Please contact campos([email protected] or msn with same address) if you need. See you then. Charles.
  17. charleshmlee
    Great setup Nic. A couple of weeks ago when I was in topracing I still saw your car with an empty emgine room, now it looks so larger than life!! Congratulations! Charles.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.