Fargo

hot water supply is seperate to the boiler hot water, so flushing chemicals will not get into the tap hot water. deffo sounds like a scalled heat exchanger, if the boiler is on but the water it not hot (luke warm) then id say the flow switch is fine, this switch is what tells the boiler to fire up when the tap is open. If the tap is on but the boiler is not then yeh flow switch is a possability. You can try reducing the flow at the tap and see if the water gets hotter for longer, What this does is keep the water in the heat excahnger a little longer so that the heated boiler water has more time to get through the scale and transfer its heat to the 'vein' next to it which is carrying the tap hot water. Personally i would get rid of this boiler as there have been 2 deaths due to CO poisoning from this boiler. what is the GC number of the boiler (xx-xxx-xx) tis on a data badge somwhere, i cna then give you a rough price for the heat excahnger

ta again all

ta, must admit, looked there first but didnt search properly for the ram.

Looking for some DDR2 ram and graphics card (PCIe16) for Tv out either by DIN or HDMI/DVI. wheres the best place online at the mo to get this shizzle. ta

thought i would have a go at sorting out the flashing O/D and TRC lights today that have come on since i put the aristo polished TB on. To check i reconnected the TRC and sensor to my original TB and started the engine, warning lights all gone, great i thought. So investigated thsi area on the new TB and found that the butterfly was not closing, as it did on the original one, aha this is my problem i thought. So looking at the aristo motor it seems to be turning the wrong way, so i remove my original one from the TB and plug this in. same thing happens. So i try adding my original TRC sensor but no differnece. i tried the arsito motor and sensor on my orginal TB and all works ok. Bothe sensors and motors work perfectly on the original TB when plugged in, but both do not work on the aristo TB I just cant figure out why the motor turns the wrong way. help

did you get this sorted Lui

off topic, but what does one of these Monaro's cost.

and errr your point

used to use Gordian Knot suite,also TMegenc, but now have found a nifty little number called Super ( http://www.erightsoft.com/SUPER.html ) does ALL my conversions now, musically and visually (for my phone, dvd, tv whatever) what ever system i will be dumping vista i think. found this review http://reviews.cnet.com/4520-10442_7-6389077-1.html

LOoking to get 2 desktops sorted, one for the missus to run Sims, Civ etc and one for me to surf, Mp3's, download and play (simultaneous) videos (to TV) and a few video conversions. Whats the opinions on Intel Pentioum duelcore and core 2 processor. and also on the AMD sempron, athlon 64 and ahlton 64x2 dual core.

whats a sensible offer. ballpark please

thanks, yes this is also mentioned in the manuals i have. do i not need to set the Ohm's on E2 and the 3rd pin (forget the name).

errr dunno lol.. too busy watching the road , will have another looksee

ive also finally got my AEM wideband hooked up, at idle i see 14.8/14.9, then at WOT down to the low 10's. this is on a BPU jpes at 1.05bar

Guys, need to find the Ohm settings data for the jspec TPS's as the workshop manuals i have cover the UK spec TB and i understand that theses are no good for the Jpsec. thanks

nope, although i did start to do that before the bench grinder came along, that really is a looooooooooooooot of work, at leat 100 times the effort of using a grinder. I do use however a B&D finger sander to make light work of casting marks on things like teh turbo pipes, and for the battery clamp and rad clamps due to the black finish on these and being a harder material.

basically colsoop advised me on a 3 stage mehtod, using a grey, green and blue compound, first mop is a hard sisal mop, second is a softer stictched jobbie and the final is a loose mop thing. something like these http://www.merlinabrasives.com/polishingkits.html give colsoop a PM, he can advise and sell you the same kit i got from him..

the bench grinder is some old one that i havent been able to find a spec on, its a Wolf, 3000 rpm. the mops and compounds were from Colsoop. lol who knows, who knows eh..

big bench grinder, polishing mops/compounds (courtesy of colsoop) and time.

how bout we cut a deal Re the speed cam det you sold me.

lol, wonder why a certain member here is wanting £26 from me for a used one..

marvelous

10 quid, thats the grab handle on the passenger side right.

might be interested in taking the drager off you.

Still makes me laugh ol' nunchuck bwoy