Sheefa

Can sell all of those mate except Clutch Kit which is taken. PM to follow. Sorry mate that had sold. Thanks.

*UPDATE BACK UP FOR SALE* I have a full set of OEM front and rear suspension parts, control arms, strut rods, bolts, camber bolts, washers, drop-links etc for the front and rear of the Supra. The only parts not ordered were the Front Upper Control arms as these don’t tend to wear as fast and mine are in great shape. I can provide full part numbers. All parts were ordered from TCB parts back in February 2017 and June 2017 and have been sat in bubble wrap in a sealed box in the loft. All parts are absolutely immaculate having been inspected. Full parts list is as follows: Rear Suspension 8* 90201 14020 washer, std part – Genuine Toyota £1.38 each + VAT (3 Days) 48730-14040 Rear Lower Arm – RH 48740-14070 Rear Lower Arm – LH 2* 48710P Nut, No2 rear lower control arm 2* 48710N Nut, No1 rear lower control arm 48194H Cam, rear suspension camber adjust No2 RH 48198R Cam, rear suspension camber adjust No2 LH 2* 48198H Cam, camber adjust, No2 48710-14110 Rear Arm Assembly RH 48710-14110 Rear Arm Assembly LH 2* 90179 12027 std part, nut 2* 48710N Nut, No1 rear lower control arm (Same Part as the lower arm Nut) 2* 48198H Cam, camber adjust, No2 - (Same Part as the lower arm Cam) 48194G Cam, rear suspension camber adjust, No1 RH 48198G Cam, rear suspension camber adjust, No1 LH 48780A Rod assy, rear 48780A Rod assy, rear 2* 48780C Nut for strut rod 2* 48780C Nut for strut rod 2* 48780B Bolt for strut rod 2* 48780B Bolt for strut rod 48725-14070 Bush, rear axle carrier 48725F RH 48725-14070 Bush, rear axle carrier 48725G LH 48770A Arm assy, Upper control, rear RH 48790 Arm assy, Upper control, rear LH 4* 48770D Nut for rear upper control arm 2* 90201 14031 std part, washer 2* 48770F Ring, E for rear upper control arm 2* 48757 Attachment, rear suspension arm 2* 48770H Bolt, rear upper control arm RH 2* 48790B Bolt, rear upper control arm LH Front Suspension 48610G Nut for front upper suspension arm RH 48630C Nut for front upper suspension arm LH 4*90209 14007 std part, washer 48610F Bolt for front upper suspension arm RH 48630B Bolt for front upper suspension arm LH 2* 90468 16016 std part, castle nut binder 1 x 48657A Stopper 48068-14080 Front Lower Arm sub assy 48069-14080 Front Lower Arm sub assy 2* 90468 16016 std part, castle nut binder 2* 48068G Nut for front suspension lower arm RH 2* 48069C Nut for front suspension lower arm LH 4* 90201 16017 std part, washer 2* 48194D Cam, front suspension camber adjust No2 RH 2* 48198D Cam, front suspension camber adjust No2 LH 1* 48657A Stopper, front lower arm bush 2* 48194C Cam, front suspension camber adjust No1 RH 2* 48198C Cam, front suspension camber adjust No1 LH 2* 95622 11200 std part, washer 2* 90170 12036 std part, nut All rear I paid £2k and front a little under £1k but with some additional bits on top like the stock roll bar mounts (£30) and drop-links (£50). Prices have also gone up since as supply is limited. I’ll let everything go for £3.2k collected - no other offers accepted. All bits here and ready to go. Collection only from Bromsgrove, B60. These are becoming harder to source, many have been discontinued, there are many stories of these being damaged in overseas transit - mine are in perfect order and ready for delivery. Please message me if genuinely interested or contact me on 07521931366. Thanks Greg

Hi Various parts for sale due to illness and funds needed. Starter Motor - SOLD TO MARK Brand New Toyota Front Windscreen Seal (not Aeroptop) - SOLD TO PARASIGHT BNIB RPS Twin Carbon Clutch as per below. This is brand new in box ready for fitment complete with instructions etc. Capable of handling ridiculous power and torque and a nice drive too. Looking for £2k (saving off nearly £1k on Whifbitz price) and delivery will be £50. http://www.garagewhifbitz.co.uk/rps-636.html BNIB InPhase USW10 Ultra Compact Active Underseat Subwoofer 300 watts. Purchased towards end of last year and still in box. Will include a few sheets of dynomat. Looking for £100 + £10 for delivery. RRP circa £130 - SOLD TO GARY SGS Compressor and 71 Piece Air Tool Kit - literally used a handful of times last year. Cost over £250 from SGS who make some excellent kit. Looking for £150 collected only due to size. See here now advertised at £220 still. https://www.sgs-engineering.com/sc50h-50-litre-high-flow-air-compressor-71pcs-tool-kit Toyota Supra 6 Speed Clutch Kit included Release Bearing, Nose Bearing, Large Circlip, Small Circlip, Wave Washer, Washer Large, Clutch Cone Washer, Washer Small. All new except release bearing which is immaculate and has covered less than 700 miles - SOLD TO MARK Fantastic condition power steering lines - £110 delivered. Second hand Aircon pump in good working order - SOLD TO MARK UK Spec Alternator in perfect working order - SOLD TO MARK I will also be listing full genuine Toyota OEM suspension shortly. Photos to follow. PM me if interested but might be best to message on 07521931366. Thanks Greg

Bump price reduced to £265 delivered or £250 collected.

Agreed.

This is a temporary pump - be warned.

Can I get the front bumper regaining clips please mate?

That's good going Shawn. Adrian Flux and Sky were the best two for me but went with AF in the end based on a sizeable saving and fully insured with agreed value. Good to see Sky are on their A-Game

Can I get a set of both please mate. PM me payment details. Cheers.

Yes I bailed out back into FIAT a few weeks ago for a circa £6k loss although if I had of stayed in I would be over £15.4k down now so 100% the right call. More falling likely do jumping back in when either BTC hits $5500 or $40 NEO whichever comes first. Avoid Bitifinex is my advice. When the whole tether debacle explodes that exchange is likely to come crashing down first.

Oil mate no water.

I dread to think what all this cost [emoji23][emoji23][emoji16]

Hi mate They cut and rolled a 1mm strip of titanium which overlapped the existing pipe by a cm and then welded it neatly also welding on a new custom flange to the end which they replicated from existing steel one. Pm to follow. Cheers

Yes indeed mate [emoji16]

So after a lot of deliberation I decided to get my Veilside Full Titianium Teardrop Exhaust sent to a specialist titanium workshop for some custom fabrication. I wanted to remove the ridiculous bottleneck and 2 bolt steel flanges. Essentially my exhaust was reducing from 3.5" to 3" in this one spot killing power potential. I came across this place in the Midlands, they do a lot of custom fabrication work for the Sea Drilling and Oil Rig industry and also manufacture hot air balloon tanks to custom spec. After speaking to the main two guys there about how best to remove restriction and fit a new straight pipe and flange in place I was happy to drop it off. Only 4 days later and £100 down I'll let the below pictures demonstrate the results! I'm utterly amazed with the work. Materials alone would of cost this let alone labour. Those welds are beautiful. Next step fitment and I'll be making some more power given it's now 3.5" minimum all the way through with a map tweak sometime in the year. I can crack on with other bits now too. Also finished returning intercooler and pipework. Gave the frobt end a good clean too. Bumper is now back on and ready to fit all the other bits.

I have TRD and yes they have their own clamps.

I'll take them please mate.

Now I understand what you called me about [emoji23][emoji23][emoji23] but alas that clutch was FUBARd anyway regardless of that cone washer!

Amazing mate, it will be epic once finished. Bet you're peeing your pantyliners with excitement [emoji16]

Yeah signed up for Ontology newsletter a while back which was a 1000 free token airdrop. RPX is awesome. They're working closely with NEO and Nex for new decentralised FIAT to Alt exchange

Totally agree. Stop-losses in crypto land with volatility are too restricting.

Stunning attention to detail.

Good man Dunk and remember even if it increases you've made a good profit with a sensible strategy. Nano is awesome. Highly recommend all NEP5 tokens.

Seriously mate you've made some free cash now. So pull your original stake and keep the rest as "fun risk capital" money. That's what I've done over the last year and now essentially I'm only playing with a few grand out of my own money out of £23k fund. When things improve again circa 10% up I'll pull the other £3k out. Then I'll have a full risk capital/savings free pot that I can play with without being emotionally attached.

Greed will kill you. Nobody has a crystal ball. I sold my BTC a few months back for a tidy profit, could of made much more when it peaked to near £15k mind but that's greedy. Personally I would be selling and investing the profits in to alt currencies. Or at least sell partial BTC and hold a little and reinvest. Only you can decide