Ric

man up.

Great, this is what i was thinking, the kit had loads of washers with it for that. Least im on the right path, cheers.

It's this kind of tool the one i have.

It's a none VVTI chris, no issues that i know of, was a case of just replacing for the sake of futureproofing/reliability. no issues currently. I expect i can pull the sprocket off with my adjustable harmonic damper remover tool thing? as it has the 2 screw holes in it, like the crank pulley? I think ill be leaving the seal alone then, unless it looks bad when i take it apart.

Thanks for the tip, i had the timing belt loosened on my last supra to do the valve seals so i know a pain the tensioners are

Thanks guys, i purposefully left off the camshaft seals as i'll be changing them when i eventually do the valve stem oil seals later on. Be good to get a few more comments on the crank one though, as it's a pain to get too otherwise.

Morning Chaps. Im going to be doing a bit of maintenance to my car in the next few weeks. Parts i have to fit: New Timing Belt New Aux Belt New Aux Pulley/tensioner New Timing Tensioner Pulley and Arm New "Grenade Pin" Tensioner New Water pump plus housing New Thermostat New Crank Pulley Hopefully a Welded Crank sprocket What other parts in this should i be looking to fit if everything is off the front of the engine? I was thinking perhaps the Crank Oil Seal? but so far mine is fine (might notice some weeping once the pulley is off?) would you change this? or is it a case of if it's not broke don't fix it? I've heard nightmares from people fitting new ones and it just blowing out all the time, what do people think? Is it just a case of pulling the old one out, pushing the new one in till it's FLUSH with the oil pump housing? Another question, is it possible to remove the whole water pump housing with all the Turbos and alternators gubbings in place? (the last time i did this i just changed the front of the water pump.)

welded crank sprocket for me please if you can do a posted price, i assume it's for the GTE, don't know if they are different between the NA/GTE

Do a google image search for supra vacuum pipes there are many many pictures of all the locations im sure one of them would have what you need.

Mine are felt seat belt centres, i hate them, attracts dust like no tomorrow.

Oh, http://japan-parts.eu/ then

I have one, but i'm not back in the UK for a few weeks yet, i'd think £20 would cover it, i'm sure you'd find one quicker but offers there.

brakecaliperspecialists.co.uk did mine, was OK, slower than they expected though due to sourcing parts.

1. Berg +1 passenger PAID 2. Tomyspeedy +1 passenger PAID 3. Tsia + 1 passenger PAID 4. a98pmalcolm + The Mrs PAID 5. Carbon_Bullet + 1 passenger PAID 6. CorruptSapphire PAID 7. Parm_93 + 1 TBC 8. Pilchard + 1 9. Fastcar + 1 10. Andy's-TT-Supra + 2 PAID 11.TKddav3 +1 12.Eddie-S +1 PAID 13. Andrew K + 1 passenger PAID 14. Pilchard PAID 15. Clay PAID 16. Dreamscape36 PAID 17. DreamscapeGF PAID 18. JCBT & Chris Bailey 19. Ric + Passenger PAID

What will the club stand be like? tarmac or grass? Do i have to go for the full weekend for club stand or just sunday ok?

You love it chris, hourly rates.

Looks great! Somebody really needs to make a guide on how to tuck all the stuff, like where things move too, what you need to extend and not extend!

It looks like a power convertor for plasma speed dials. They have one power in and a few cables coming out? You say just 2 cables, but the connector next to your finger look like the same type of wires?

there is a App on the apple app store, probably android also. TSRM Supra app

Im from Sheffield, would be good for a local meet!

You dont have to undo the screws, the bulb should just twist to unlock, then pull out.

Surely contacting Precision or SRD (use a lot of Precision) would be the best option.

Work know how to make good centre caps, the solid brushed ali ones on mine are great! these will be very good quality. http://www.carbonangel.co.uk/imagedump/suprabuild/untitled%20(10%20of%2012).jpg

With the opening paragraph on that site... i wonder who they are...

Get out.. Stay stock!