Ric

Ah Wikipedia... I could probably edit the page stating the ICBM's where made out of mushrooms, people would believe it too.. /s

nice work mate, if thats the drivers front though? looks like the disk could be the wrong way around as the grooves cut into the pad?

Just buy a whole new kit from Amazon, they are only 40quid or so, i bet a new set of bulbs isnt far off that price. If you have amazon now in your area you'll have them in a hour.

Cheers, No im working this year sure it will be a grand weekend though

Mines a stock auto TT aero (apart from the wheels/body work + engine dress) and agreed value at 20k So as long as you can prove what you've spent and what it would cost to replace like for like, they should agree it.

My agreed value had everything listed, pictures usually 6, Front, Rear, Sides Interior, Boot etc. Then receipts of all the parts, their value and a total at the end, that is the agreed value you should ask for. The ultimate cost of replacing your car like for like, thats what agreed value is, not market value. This would be done with a letter etc after the fact, not over the phone. usually an insurance company will send out the forms for a agreed value etc.

ebay is full of them Chrome, Polished, brushed take your pic.

he said just the one, sorry dude, think i would have bought them all if he had!

Cheers dude! They were for sale on the Facebook group, I don't think the fella knew what he was selling, he only wanted £30 for them. He worked in a Toyota dealer and they had these in storage for agessss

i was gonna say £200 is a great price, at £150 im almost tempted to buy it, even though i already have one. My comment wasn't a dig, i know you didn't put a price on this post, but the rules mean you have too. so i just mentioned your facebook price!

This is up for £200 on the facebook group, for any potential buyer.

No updates for a while here, forgot to add a few pics from Japfest! I managed to find a set of brand new OEM toyota black foot mats for a steal of a price (still on the hangers) not sure ill actually fit these or just keep them in the loft! I picked up some carbon sill trims from Gary on facebook, these look great and fit really well. This pic shows how the carbon skirts and the sill trims work (they don't fit like this, i'd put the drivers side on the passenger side like a dope.) Couple from Japfest and on the way Best club stand, woop

You have to cut out the rivet what holds them together, then you can use a small bolt to fix them together after.

Theres 2 sensors AFAIK, one for the ecu and box, one for the speedo/rev counter Edit - Error 42 relates to speed sensor 1

usually the speed sensor in the gear box. or the plastic gear tooth on the sensor has failed. they arent expensive for the toothed part, sensor isnt that cheap.

Nobody talking about the radio messages? I really try to avoid the team bias argument, as i'd like to THINK they wouldnt do that, but jeeeaz they don't help themselves. Refusing to help hamilton in baku over the radio. Didn't hesitate giving Nico advise over the radio... Engine Modes and how to avoid the issue... In Nico's interview after: So he's admitting he received information about what switches etc to change. So we must take that if they'd not offered this advice he would have probably not been in the position he finished in, cheating?

Edit, sorry didnt read this right

It's the subframe isnt it? it looks fine to me, mostly surface rust, bit of a wire drill attachment and treatment would see that right imo.

They have adjustment knobs at the bottom afaik, turn the wheel and look in, you should see it

You lack the basic understanding of brakes and brake fluid hydraulics, Please take it to a garage, you'll need a trailer.

We told you which bolts to undo there was only 2, not even on the caliper, why did you undo all the bolts on the caliper? I'd expect you've separated the caliper now, the seals inside could be disturbed and i expect it will need a rebuild now to replace them. As people said, you shouldn't be doing brakes if you don't know what you're doing.

True, those are probably the better ones.

just the 2 with the allen Key hole in them.

everybody comes back

I have the cam covers, polished with AN fittings. Also have the breather system for the AN fittings http://www.mkivsupra.net/vbb/showthread.php?334326-Polished-AN-Cam-Covers-PHR-Breather-system