cntt

the dash kit sold? thats all I really need

I got both UK and jap lights here, and checked the bulbs, only thing I can see different is that the bulb size are swapped over between the driver light and full beam, all I did on the lights when I was swapping them around was swapping over the bubls and the plugs, works perfect.

here's one I opened up and just finish spraying today from a UK glass light, gonna leave it over night then I will put it back together. still in search of a Driver side glass light if anyone can help me out there

but in second though, the chrome rings wouldn't match, still looking for one.

thats it, I almost got one glass light finished, I got a set of jap lights done already cheers mate for linky

anyone got a driver side glass headlight that they want to sale? cheers

cheers imi suprattgaz: if you use a heat gun, it is very easy to open them, oven bake you want to keep and eye on it, the glue melt easy enough, start from the inner lower corner, which has a good bit of gap, then the spray part, go easy on masking tape or they will rip the chrome out of the rings, I had to re-do the rings on mine, but didn't like it so much so I have it all black instead, but I'm also now doing my Glass light, have it opened, so these ones I keep the rings. clean off all the glue left on it, make it easier to re fit them, once all clips can go back on the lights after you re fit the lens, then you have it done, any silicon sealing will do but black would be nicer, thats all really, hope it helps you got them fitted today, just before it starts to rain, perfect timing, tested out in the rain, no fogs in lens, lovely doing the glass one now, should have that done this week sometimes if I'm not busy. then these ones I have will be remove from my car again in search of driver side glass light if anyone got one sitting around and have no use of it, I like to make a purchase cheers

ofcos, I'm near Pro at this stage on moddings

LOL, sorry to hear that, maybe I'm just lucky . I actually been offer a job and worked in a garage for a while, but fixing old bangers isn't so much of my interest so I left

Thanks sdavies my first DIY job I did was on a Honda Integra , brakes conversion, risky it was I know, but it turned out perfect, I then went in to engine transplant and rebuild, from a standard 1.8 vtec to Mugen R , then I did a Turbo Prelude for a friend, learning as I'm DIYin , the clutch in the sup was the first RWD I ever done, NA-T coming soon for me I can see , if you take your time, and not rushing yourself, things can be done a lot easier. I normally do a lot of reading on the net and do research, I got so use to working with cars now after 6 years of DIY, there isn't a single thing I couldn't do at this stage

Got myself a second set of lights and decided that I will do my own facelift conversion, since I have done spray paint before, might as well, got the lights from Supra-Dupra, seems to look ok so far, taking the lens off was easy with the heat gun, I have all the glue cleaned off and the lens can now line up perfect, both lens have been cleaned 100%, looking good should be ready for re-installation tomorrow night SMASHING new body kit and spoiler are to go on soon, thats another DIY job for me

anyone used these before in there supra for engine and gearbox? it suppose to help lubrication for better lub and protection for high revving and hard driving, I used to use them mix with engine oil and gearbox oil in my last car, which was a Mugen Integra Type R, revs out to 9700rpm. engine and gearbox was always sweet and I had been driving that for a year at high rev every single day, sold that for 6 or 7 months now and new owner also drives it hard with the same oil change as I do every 6000k. any advice to rather use it or not with the supra? as I'm about to change gear oil, lost a bit of oil yesterday changin the clutch, either change oil or mix the Lucas in cheers

ah, didn't think someone would have asked the same question oops when I put in LSD is there an option to add the other mount? cheers guys

thanks, though it was suppose to have a left and right

is there just one or 2 rubber mount bushing on the rear of the diff? I see only one on mine today when I was doing the clutch, looking at it from the rear, I have only one on the passinger side, if there should be another on the driver side, anyone got part number for it? there's nothing there now but a hole cheers

Yea mate, it's the Alien's

Alienware Gaming Machine Alienware Predator Case In Pearl Gold Color with Red Lights Intel Pentium 4 P650 3.4Ghz 2MB Cache 2 Gig Ram EVGA 7900 GTX 512MB PCI-E 2 x 160Gig SATA Raid0 16x Dual Layer DVDRW 6.1 Sound GigLan Eithernet http://www.iol.ie/~egghead/DSC00051.JPG £850 + PP

cool I wait for the cost. pm me the total. cheers mate

whats postage to ireland? I want them, they're perfect with bilstien shocks

get me total with shipping cost to me in Ireland? I dont have cruise control on my Sup but I more than likely take it, I already have a momo wheel but my friends looking for one, so yeah sure why not I have another 2 of those surround sitting around anyway

haven't got much done to my own so I be interested in the Decat, HID(which bulbs are they ), my aerial not working properly so that too , is the N1 loud? I dont like it loud , exact same model car and same color anything else you think of for sale let me know

how much you looking for? I may take it off your hands

interested in alot of your parts

hey guy I have one too I can sell

yea pics please