Supra_Steeve

Hi Pig, Where is the vidéo? Thks

Do you have some picts of your intercooler kit? Do you have a blow off valve? the stock. Do you not have more lag with a FMIC. Is your Idle good?

When Can we see it?

Where is the video from Touquet Meeting? The meeting in France

Who Runs AEM EMS on this Forums? Who can tune it? Do you know how many Knock Volts is consider bad for the engine?

Anyone?

What is the size of the turbo? On PHR web site they tell you can hit 520hp with this turbo?

How many HP do you loose with the automatic gear box? 20% 382hp at the wheel could be 450hp to the engine? Best way to go is 650cc or more with piggy back or AEM EMS.

PIG it is amazing!! I ran with you in France 2 weeks ago and there wasn't a big difference between us. I cannot believe my car run 400BHP at the wheel! In the video there is another car BPU++(GREY, french car) with 390BHP at the wheel and he is larger behind. I run 1.3B with a S-AFCII +45% between 4500 to 7000RPM and I run 11.8:1 with stock 550cc injectors

Check on Ebay, I have bought it there.

I've done a hole on the plastic It seems that it is too small http://www.jsoclub.com/images/Steeve/DSC03637.JPG What Alex done seems good

Actually When Pig spoke me on the motor way I did'n't understand what he was telling me. It is when I saw the video that I understood. For "Je Suis D'origine "than means Stock in French it is just for joke :-)). Here is another video with my friend. He has T78 AEM 850cc injectors Enjoy http://www.jsoclub.com/video/Supra_Meeting2.wmv

What does your car look like?

What does "nutters" means?

I would like to see the video with the camera in Pig's Supra. Where is this video?

I've seen that a guy wants to see it. I had chromed it (home made) I have one on my car. On the pict the harness isn't finish to be install. Pig have seen it on got in the car too http://www.jsoclub.com/images/Steeve/Arceau.jpg

I would like to do this hole too but like this http://turbomagazine.com/features/0505_turbo_supra_03_z.jpg Do you know some one in UK who can do this? Thks

I have a friend who would like hybrid Turbos because Stock ones are dead. He has an Europeen cars. What are the main difference? Can We put more boost on them? Thks

Hi, I'm the french guy. Yes It fits but some problems: http://www.jsoclub.com/images/Steeve/DSC03329.JPG The flange is parrallele to the engine and this is a problem to fit the intake. otherwise you can do this horrible fitting! http://www.elit3.com/upload.php?file=bradssup.jpg So I cut the flange to put the turbo like this http://www.jsoclub.com/images/Steeve/DSC03351.JPG http://www.jsoclub.com/images/Steeve/DSC03357.JPG I bought the Boost logic kit without the manifold and W/G It fit quite good even the exhaust is a lot short and doesn't go out the rear bumper http://www.jsoclub.com/images/Steeve/DSC03356.JPG http://www.jsoclub.com/images/Steeve/DSC03355.JPG CHange the external W/G by a Tial one, cut the 4 bolt fit and weld a V-flange adaptor. I have some boost creep problem sometimes and I don't know if it comes from W/G (44mm) or AVC-R

I have a BL61. Which Boost controller do you advice to me? Thks

Nice! was you the guy in the Pig Supra? I have the video too (but in my car)

Hi, Is there a difference between all these ECU? I have a G-force ECU and going to AEM. I would like to know if I could sell it for others cars than Europe ones.

Thks every one I live 40km South of Paris

Hi everybody, I'm new on your forum. I meet you at the Dragon Ball last week end. Here is my car(With carbon Bonnet)